AEMC AmpFlex 300A Manual de usuario

AmpFlex®

Flexible AC Current Probes

USER MANUAL

ON OL

600V CAT IV

10 mV/A

1 mV/A

OFF

INSTRUMENTS

AmpFlex

www.ShopAEMC.com

Shop for AEMC products online at: 1.888.610.7664

Statement of Compliance

Chauvin Arnoux®, Inc. d.b.a. AEMC®Instruments

certifies that this instrument has been calibrated

using standards and instruments traceable to

international standards.

We guarantee that at the time of shipping your

instrument has met its published specifications.

An NIST traceable certificate may be

requested at the time of purchase, or obtained

by returning the instrument to our repair and

calibration facility, for a nominal charge.

The recommended calibration interval for this

instrument is 12 months and begins on the date of

receipt by the customer.



Serial #:

Catalog #:

_____________________________________

Model #:

AmpFlex

AC Current Probe

Please fill in the appropriate date as indicated:

Date Received:

Date Calibration Due:

www.ShopAEMC.com

Shop for AEMC products online at: 1.888.610.7664

Table of Contents

Warning ..................................................................................................... 2

International Electrical Symbols ................................................................ 2

Definition of Measurement Categories ...................................................... 3

Receiving Your Shipment .......................................................................... 3

Packaging .................................................................................................. 3

Description ................................................................................................ 4

Features .................................................................................................... 5

Features .................................................................................................... 6

Accessories ............................................................................................... 6

Standard Models ....................................................................................... 7

Specifications ............................................................................................ 8

Instrument Compatibility .......................................................................... 12

Operation ................................................................................................. 12

Making Measurements with the AmpFlex® .......................................... 12

Tips for Making Precise Measurements: ............................................. 12

Typical Response Curves: ................................................................... 16

Maintenance ............................................................................................ 18

Warning ............................................................................................... 18

Battery Replacement ........................................................................... 18

Cleaning............................................................................................... 18

www.ShopAEMC.com

Shop for AEMC products online at: 1.888.610.7664

AmpFlex® - Flexible AC Current Probes

- 2 -

Warning

These safety wa rnings a re p rovided t o en sure the safety of

personnel and proper operation of the instrument.

 Read the in struction ma nual completely and foll ow all the

safety inform ation befo re attempting to use o r servi ce this

instrument.

 Wear protective clothing and gloves as required.

 Use ca ution on any circu it: potentially high voltag es an d

currents may be present and may pose a shock hazard.

 Read the safety spe cifications section prio r to using th e

current probe. Never exceed the max voltage ratings given.

 Safety is the responsi bility of the operator. T he A mpFlex®

must be used only by qu alified p ersonnel u sing a pplicable

safety precautions.

 ALWAYS de-energize the c ircuit before wrapping the

AmpFlex® around b are conductors, b us ba rs, or near live

parts. Do not wrap on live conductors.

 ALWAYS c onnect the elec tronic module to the dis play

device before wrap ping t he AmpFl ex® aro und th e sample

being tested.

 ALWAYS inspec t the module, sens or, s ensor cable, and

output termin als pri or to u se. Repl ace any defective parts

immediately. Use only factory parts.

 NEVER us e the AmpFlex ® on ele ctrical conductors rated

above 600V CAT IV; 1000V CAT III.

International Electrical Symbols

This symbol signifies that the current probe is p rotected by double

or reinforced insulation. Use o nly factory spe cified repla cement

parts when servicing the instrument.

This symbol signifies CAUTION! and requests that the user refer to

the user manual before using the instrument.

This symbol refers to a type B current sensor. Do not apply around

or remove from HAZARDOUS LIVE conductors without additional

protective means (de-energizing the circuit or wearing protective

clothing suitable for high voltage work).

www.ShopAEMC.com

Shop for AEMC products online at: 1.888.610.7664

AmpFlex® - Flexible AC Current Probes

- 3 -

Definition of Measurement Categories

CAT I: For measurements on circuits not directly connected to the A C

supply wall o utlet su ch as prot ected se condaries, si gnal level,

and limited energy circuits.

CAT II: For mea surements pe rformed on ci rcuits dire ctly co nnected to

the ele ctrical distri bution system. Exa mples are m easurements

on household appliances or portable tools.

CAT III: For me asurements p erformed in the b uilding in stallation at the

distribution l evel su ch a s on h ardwired e quipment in fixed

installation and circuit breakers.

CAT IV: For me asurements p erformed at the primary ele ctrical supply

(<1000V) such as on p rimary ove rcurrent protection devi ces,

ripple control units, or meters

Receiving Your Shipment

Upon receiving you r shipment, ma ke sure that the contents a re

consistent wi th the packin g list. Noti fy your di stributor of any mi ssing

items. If the equipment appears to be damaged, file a claim immediately

with the carrier a nd notify your di stributor at on ce, giving a detailed

description of any damage.

Packaging

Your AmpFlex® consists of the following items:

 Flexible probe with electronic module

 User manual

 9V battery

www.ShopAEMC.com

Shop for AEMC products online at: 1.888.610.7664

AmpFlex® - Flexible AC Current Probes

- 4 -

Description

The AmpFlex® is a flexible AC current transformer composed of a flexible

sensor a nd an electronic m odule. The flexib le sen sor permits

measurements on condu ctors where standard clamp-on probe s could

not be used. In pa rticular, it can be installed in ti ght spaces, around

breaker panels, around cable bundles, around wide or large bus bars, or

even wrapp ed arou nd irregula r sh apes. The Shap e Memory feature

enables the user to “pre-shape” the sensor before inserting it between or

around conductors. This feature facilitates closing, enhances user safety,

and all eviates the drooping effe ct ty pically a ssociated with flexible

sensors.

The AmpFle x® is lightwe ight and do es not u se magneti c co res like

standard t ransformers. Th e tran sformation pri nciple is ba sed on an ai r

core. It presents virtually no load to the system u nder te st, has a low

phase shift and excellent frequency response, and cannot be damaged

by overloads.

The se nsor assembly is waterproof and insul ated for 600V CAT IV;

1000V CAT III. The AmpFl ex® meets EN 61010-1, is CE m arked, and is

designed wit h material s a nd co mponents to meet internatio nal agency

approvals.

The Amp Flex® ha s a n mV output proportional to th e current m easured

for direct readings on DMMs, data l oggers, oscilloscopes, and power or

harmonic meters. TRMS m easurements are taken when connected to a

TRMS m eter. The Amp Flex® is in sensitive to DC currents an d onl y the

AC component of the measured signal is measured.

The length of the flexible sensor can be selected in lengths of 24" , 36",

and 48" in le ngth. Consult the factor y for cu stom lengths, ranges and/or

features.

www.ShopAEMC.com

Shop for AEMC products online at: 1.888.610.7664

AmpFlex® - Flexible AC Current Probes

- 5 -

AmpFlex®

600V CAT IV

7. Flexible Sensor

(Diameter 0.5", 12.5mm)

8. Lead from Sensor to Module

(6.5 ft, 2m)

9. Electronic Module -

Descriptive Label on Back

Case (range, model, etc.)

1. Positive: Red Banana Plug (+)

2. Common: Black Banana Plug (-)

3. Power ON Indicator (Green LED)

4. Overload Indicator (Red LED)

5. Range Selection Switch

6. AmpFlex ® Connector/Latch

Figure 1

www.ShopAEMC.com

Shop for AEMC products online at: 1.888.610.7664

AmpFlex® - Flexible AC Current Probes

- 6 -

Features

 Models to measure from 0.5Arms to 30,000Arms

 Accuracy 1% of Reading

 TRMS measurements when connected to a TRMS instrument

 No core saturation or damage if overloaded

 Overrange LED for measurement circuitry

 600V CAT IV; 1000V CAT III; EN 61010; CE Mark

 Wate rproof sensor

 9V battery for typical 150 hour continuous operation

 Shape Memory for custom pre-shaping of sensor before use

(no drooping)

 Very high frequency response

 Low phase shift for power

 Insensitive to DC, measures only AC component on DC + AC signals

 Excellent linearity

 Lightweight

Accessories

Banana (Female) / BNC (Male) Adapter ..................... Cat. # 2118.46

For connection of the AmpFlex® to SLII Models L101, L102, L562,

BNC terminals on scopes and other displaying instruments.

www.ShopAEMC.com

Shop for AEMC products online at: 1.888.610.7664

AmpFlex® - Flexible AC Current Probes

- 7 -

Standard Models

*This model (Cat. #2114.87) is recommended to be used with our Simple Logger® II Models

L101, L102 & L562.

All of our AmpFlex® models are designed to be used with recorders or power analyzers with a

voltage AC input. A scale factor may need to be entered into the recorder to display the exact

value.

Model Measurement

Range Output Sensor

Length

Max

Conductor

Size Cat. #

300-24-2-10 30/300A 100/10mV/A 24” (610mm) 8” (190mm) 2112.88

1000-24-1-1 1000A 1mV/A 24” (610mm) 8” (190mm) 2112.39

1000-24-2-1 100/1000A 10/1mV/A 24” (610mm) 8” (190mm) 2112.98

1000-36-2-1 100/1000A 10/1mV/A 36” (910mm) 11” (290mm) 2113.00

3000-24-2-0.3 300/3000 A 3.3/0.3mV/A 24” (610mm) 8” (190mm) 2114.87*

3000-24-1-1 3000A 1mV/A 24” (610mm) 8” (190mm) 2112.46

3000-36-1-1 3000A 1mV/A 36” (910mm) 11” (290mm) 2112.48

3000-24-2-1 300/3000A 10/1mV/A 24” (610mm) 8” (190mm) 2113.05

3000-36-2-1 300/3000A 10/1mV/A 36” (910mm) 11” (290mm) 2112.00

3000-48-2-1 300/3000A 10/1mV/A 48” (1220mm) 15” (390mm) 2112.01

6000-36-2-0.1 600/6000 A 1/0.1mV/A 36” (910mm) 11” (290mm) 2113.21

30000-24-2-0.1 3000/30 ,000A 1/0.1mV/A 24” (610mm) 8” (190mm) 2113.33



www.ShopAEMC.com

Shop for AEMC products online at: 1.888.610.7664

AmpFlex® - Flexible AC Current Probes

- 8 -

Specifications

Model 300A 30/300A 1000A 100/1000A

Measurement

Range 5 to 300A 5 to 300A 5 to 1000A 5 to 1000A

Accuracy ±1% +200mA ±1% +200mA ±1% +200mA ±1% +200mA

Output Signal 10mV/A 100mV/A or

10mV/A 1mV/A 10mV/A or

1mV/A

Crest Factor

(mid-range) 3.0 3.0 9.0 9.0

Phase Shift @

50/60Hz 1.5° 1.3° 0.7° 0.7°

Residual Noise 200mA 200mA 200mA 200mA

Model # 3000A 300/3000A 3000/30000A 600/6000A

Measurement

Range 5 to 3000A 5 to 3000A 5-30000A 5 to 6000A

Accuracy ±1% +200mA ±1% +200mA ±1% +1A ±1% +500mA

Output Signal 1mV/A 10mV/A or

1mV/A

1mV/A or

0.1mV/A

1mV/A or

0.1mV/A

Crest Factor

(mid-range) 3.0 3.0 3.0 > 10

Phase Shift

@ 50/60Hz 0.7° 0.7° 0.5° 0.5°

Residual Noise 200mA 200mA 1A 500mA

*Reference Conditions: 25°C ± 5°K, 20 to 75% RH, 1 minute warm-up, battery at 9V ± 0.5V, conductor

center, external DC magnetic field < 40A/m, no external AC magnetic field, no external electrical field, 10

to 100Hz, sine wave. See accuracy curves for low currents.

www.ShopAEMC.com

Shop for AEMC products online at: 1.888.610.7664

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario