AEMC 514 Manual de usuario

TRMS

CLAMP-ON METER



MEDIDORES DE TENAZA TRMS

514

ESPAÑOL Manual de

Instrucciones

ENGLISH User Manual

Statement of Compliance

Chauvin Arnoux®, Inc. d.b.a. AEMC®Instruments

certiﬁes that this instrument has been calibrated

using standards and instruments traceable to

international standards.

We guarantee that at the time of shipping your

instrument has met its published speciﬁcations.

An NIST traceable certiﬁcate may be

requested at the time of purchase, or obtained

by returning the instrument to our repair and

calibration facility, for a nominal charge.

The recommended calibration interval for this

instrument is 12 months and begins on the date

of receipt by the customer. For recalibration,

please use our calibration services. Refer to our

repair and calibration section at www.aemc.com.

Serial #: ________________________________

Catalog #: 2117.70

Model #: 514

Please ﬁll in the appropriate date as indicated:

Date Received: ___________________________

Date Calibration Due: ______________________

Chauvin Arnoux®, Inc. d.b.a AEMC®Instruments

www.aemc.com

Clamp-on Meter Model 514

Table of Contents

1. INTRODUCTION ............................... 3

1.1 International Electrical Symbols.............3

1.2 DenitionofMeasurementCategories...4

1.3 ReceivingYourShipment.......................4

1.4 OrderingInformation ..............................4

1.4.1 Accessories/Replacement.........4

2. PRODUCT FEATURES....................... 5

2.1 Description .............................................5

2.2 Model514ControlFeatures...................6

2.3 LCD Display ...........................................7

3. SPECIFICATIONS ............................. 8

3.1 ElectricalSpecications .........................8

3.2 MechanicalSpecications......................9

3.3 EnvironmentalSpecications...............10

3.4 SafetySpecications............................10

4. OPERATION.................................... 11

4.1 ButtonFunctions ..................................11

4.1.1 Data Hold ...............................11

4.1.2 PeakHoldFunction................11

4.1.3 MAX/MINFunction ..................12

4.1.4 RELFunction...........................12

4.2 AC/DCCurrentMeasurement..............13

4.3 ACVoltMeasurement ..........................14

4.4 DCVoltMeasurement ..........................15

4.5 ResistanceMeasurement ....................16

ENGLISH ................................................................ 1

ESPAÑOL.............................................................. 25

Clamp-on Meter Model 514

4.6 ContinuityMeasurement ......................17

4.7 DiodeMeasurement.............................18

4.8 FrequencyMeasuringUsing

 VoltageInput ........................................19

4.9 FrequencyMeasurementUsing

 CurrentInput ........................................20

5. MAINTENANCE............................... 21

5.1 Warning!...............................................21

5.2 Cleaning...............................................21

5.3 Battery Replacement............................22

Repair and Calibration........................................23

TechnicalandSalesAssistance .........................23

Limited Warranty ................................................24

Warranty Repairs................................................24

Clamp-on Meter Model 514

CHAPTER 1

INTRODUCTION

Warning

● Readtheusermanualbeforeoperatingandfollowall

safetyinformation.Onlyusethemeterasspeciedin

thisusermanual.

● Neverusethismeteronacircuitwithvoltagesgreater

than600Vrms@50/60Hz,Cat.IIIor1000V,Cat.II.

● Nevermeasurecurrentwhilethetestleadsarecon-

nectedtotheinputjacks.

● Donotoperatethemeterifthebodyortestleadslook

damaged.

● Donotperformresistanceandcontinuitytestonalive

circuit.

● Useextremecautionwhenmeasuringlivesystemswith

voltagesgreaterthan60VDCor30VAC.

● Useextremecarewhenworkingaroundbusbarsand

bareconductors.

● Donotusethemeterinoverrange/overloadconditions

(OL).

● Foraccuratereadings,changethebatterywhenthe

symbol appears.

1.1 International Electrical Symbols

Signiﬁes that the instrument is protected by double or reinforced

insulation.

On the instrument, this symbol indicates a WARNING and that the

operator must refer to the user manual for instructions before

operating the instrument. In this manual, the symbol preceding

instructions indicates that if the instructions are not followed, bodily

injury, installation/sample and product damage may result.

Risk of electric shock. The voltage at the parts marked with this sym-

bol may be dangerous.

Refers to a type A current sensor. This symbol signiﬁes that application

around and removal from HAZARDOUS LIVE conductors is permitted.

In conformity with WEEE 2002/96/EC

Clamp-on Meter Model 514

1.2 Deﬁnition of Measurement Categories

CAT II: For measurements performed on circuits directly

connected to the electrical distribution system.

Examples are measurements on household

appliances or portable tools.

CAT III: For measurements performed in the building

installation at the distribution level such as on

hardwiredequipmentinxedinstallationandcircuit

breakers.

CAT IV: Formeasurementsperformedattheprimaryelectri-

calsupply(<1000V)suchasonprimaryovercurrent

protectiondevices,ripplecontrolunits,ormeters.

1.3 Receiving Your Shipment

Upon receiving your shipment, make sure that the

contentsareconsistentwiththepackinglist.Notifyyour

distributorofanymissingitems.Iftheequipmentappears

tobedamaged,leaclaimimmediatelywiththecarrier

and notify your distributor at once, giving a detailed

descriptionof any damage. Savethe damaged packing

containertosubstantiateyourclaim.

1.4 Ordering Information

Clamp-on Meter Model 514..................... Cat. #2117.70

Includes meter, pair of test leads (red/black with probe tips), 9V

battery, soft carrying case and a user manual.

1.4.1 Accessories and Replacement Parts

Setof2,5ftcolor-codedleads.................. Cat. #2140.68

ReplacementPouch .................................. Cat. #2118.94

Order Accessories and Replacement Parts Online

Check out our Storefront at www.aemc.com/store

Clamp-on Meter Model 514

CHAPTER 2

PRODUCT FEATURES

2.1 Description

The AEMC®Model 514 is a general purpose professional

clamp-on meter that measures up to the toughest stan-

dards. This meter offers a complete set of measurement

ranges including AC Amps, AC Volts, DC Volts, Ohms,

Continuity with beeper, Frequency from V or A, Diode

Test function and also uses Hall Effect sensor technology

that provides both DC and AC current measurements to

1000A. The Model 514 is in compliance with international

safety and quality standards to ensure professional and

reliable measuring tools.

The Models 514 is sized for comfortable, one-handed

operation. The tapered and hooked jaw design facili-

tates maneuvering in crowded wiring and breaker panels,

making it easy to select conductors. The jaw opening

accommodates one 750kcmil cable or two 350kcmil

cables. The large and easy-to-read 4000-count LCD fea-

tures comprehensive user information symbols, such as

low battery, polarity, overload, and an analog bargraph

for easy trend readings. It is equipped with a Data Hold

function that freezes the measurement for later viewing,

Min/Max, and a fast 1ms Peak Hold function for capture

of signals.

The Model 514 is a True RMS clamp-on that provides

RMS measurements for today’s non-linear electrical envi-

ronments.

Clamp-on Meter Model 514

2.2 Model 514 Control Features

1. JawAssembly

2. LeverforJawOpening/Closing

3. RotaryRangeSelectorSwitch

4. Maximum/MinimumButton

5. LCD Display

6. COM(black)Input

7. DataHoldButton

8. PeakHoldButton

9. AC/DCSelectorButton

10. RelativeButton

11. Positive(red)Input

Clamp-on Meter Model 514

2.3 LCD Display

LowBattery

DCInput

Polarity Indicator

Zero (Relative)

ACInput

AutoPowerOffIndication

Positive Peak Detect Indication

ContinuityBeeperEnabled

DiodeFunctionIndication

NegativePeakDetectIndication

Data Hold

ManualRange

ΩResistanceMeasurementIndicator

VA Voltage/CurrentIndicator

KHz / MH FrequencyMeasurementIndicator

AnalogBargraph

Clamp-on Meter Model 514

CHAPTER 3

SPECIFICATIONS

3.1 Electrical Speciﬁcations

Reference Conditions: 23°C±5°C,45to80%RH,TrueRMSforVAC and

AACaccuracyarespeciedfrom5%to100%ofrange,crestfactor1.4<CF

<3atfullscale&CF<6athalfscale.

AC Amperes (Auto-Ranging)

Range Resolution Accuracy Overload

40A 0.01A 50/60Hz:1.9%ofReading±5cts

60/500Hz:2.5%ofReading±5cts 1200Arms400A 0.1A

1000A 1A

AC Volts (Auto-Ranging)

Range Resolution Accuracy (50/500Hz) Overload

400V 0.1V 1.5%ofReading±5cts 1000Vrms

750V 1V

DC Amperes (Auto-Ranging)

Range Resolution Accuracy (50/500Hz) Overload

40A 0.01A

2.5%ofReading±10cts 1200Arms400A 0.1A

1000A 1A

DC Volts (Auto-Ranging)

Range Resolution Accuracy (50/500Hz) Overload

400V 0.1V 1.0%Reading±2cts 1000Vrms

1000V 1V

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario