ZALMAN CNPS9700 LED Manual de usuario

User’s Manual

CNPS9700 LED

www.ZALMAN.com

V 2.0

Intel Socket 1156/775 CPU

Core i7

Core i5

Core 2 Quad

Core 2 Duo

Pentium Dual Core

Pentium D

Pentium 4

Celeron D

AMD Socket AM3/AM2+/AM2/754/939/940 CPU

Phenom Ⅱ

Phenom

Athlon ⅡX2

Athlon

Athlon 64

Athlon X2

Athlon 64 X2

Athlon FX

Athlon 64 FX

Opteron

Dual-Core Opteron

Sempron

To ensure safe and easy installation,

please read the following precautions.

.COM

2. Specifications

Model

Spec. CNPS9700 LED

Material Pure Copper, Aluminum

Weight 764g

Dimensions 90(L) Ⅹ124(W) Ⅹ142(H)㎜

Fan

Bearing-Type 2 Ball-Bearing

RPM 1,250 ~ 2,800rpm ±10%

Noise Level 19.5 ~ 35dBA ±10%

Input Voltage 12V

Fan

Mate 2

Output Voltage 5 ~ 11V ±2%

Maximum Capacity Up to 6W

ZM-STG1

Net Weight 3.5g

Temp Range -40 ~ 150℃(-40 ~ 302℉)

1. Precautions

1) Use and keep product away from reach of children and pets.

2) Do not ingest the Thermal Grease, and avoid its contact with skin and

eyes. If contact is made with skin, wash off with water. If ingested or

irritation persists, seek medical attention.

3) To prevent possible injuries, gloves must be worn while handling this

product.

4) Excessive force exerted on the fan may cause damage to the fan and/

or system.

5) Avoid inserting objects or hands into the fan while it is in operation to

prevent product damage and injuries.

6) Check the components list and condition of the product before

installation. If any problem is found, contact the retailer to obtain a

replacement.

7) Zalman Tech Co., Ltd. is not responsible for any damages due to

overclocking.

8) During transportation of the system, the cooler must be removed.

Zalman is not responsible for any damages that occur during the

transport of a system.

9) Product design and specifications may be revised to improve quality

and performance.

Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due

to external causes, including but not limited to, improper use,

problems with electrical power, accident, neglect, alteration,

repair, improper installation, or improper testing.

.COM

1) Common Components

3. Components

Clip Support Fixing Bolts

AMD Clip LeverAMD Clip

Clip Support

User’s Manual

Washers Nuts

Intel Clip

Clip Fixing Bolts

Cooler

2) Intel Components

3) AMD Components

Thermal Grease

Fan Mate 2 Cable

Fan Mate 2 Double-Sided Tape

.COM

4. Installation Requirements

1) Space Requirements

2) Air Guide Removal

3) Cooler Orientation

The cooler’s installation requires unobstructed space with dimensions of 127㎜

(width), 93㎜(length), 145㎜(height), and the CPU as a central reference point.

Please check if components such as ODDs and PSU protrude into the required

space.

Air guides on enclosures must be removed, before the cooler’s installation, for

they protrude into the cooler’s required space.

It is recommended that the cooler be installed so that air flows from the cooler toward

the enclosure’s rear exhaust fan.

93㎜

145㎜

127㎜

PSU

.COM

4) Installation Based On Clip Orientation

A. Horizontal Clip Orientation

B. Vertical Clip Orientation

.COM

②Remove any foreign particles from the Base of the the cooler and the

surface of the CPU, then shake well the enclosed thermal grease and

apply a through layer of thermal grease on the surface of the CPU and

the Base of the cooler.

1) Intel Socket 1156 / 775 Installation

①Install the Clip Support to the motherboard according to the socket-type.

5. Installation

Nut

Washer

Bolt(silver)

Clip Support

M/B

Socket 1156

Socket 775

▶Please make note of the Lever Slot’s direction when

installing the Clip Support.

Caution

Lever

Slot

.COM

④Refer to Section 6 ‘Fan Mate 2 Installation and Usage’for instructions on

power connection.

③Insert a Bolt into both ends of the Intel Clip, then screw each Bolt a little

at a time, alternating between each Bolt, until the Clip is fully installed.

2) AMD Socket AM3 / AM2+ / AM2 / 754 / 939 / 940 Installation

①Remove any foreign particles from the Base of the the cooler and the

surface of the CPU, then shake well the enclosed thermal grease and

apply a through layer of thermal grease on the surface of the CPU and

the Base of the cooler.

▶For installations with horizontal Clip

orientation, please be cautious to

not exert excessive force on the fan

while using a screwdrivers to install

the Clip.

Caution

.COM

③Refer to Section 6 ‘Fan Mate 2 Installation and Usage’for instructions on

power connection.

①Connect Fan Mate 2 between the

Fan Cable and the motherboard

as shown in the diagram below.

②Fan Mate 2 can be installed on the

side of the case using Double-Sided

Tape.

M/B

Fan Connector (Cooler)

Double-Sided Tape

6. Fan Mate 2 Installation and Usage

1) Fan Mate 2 Installation

②Insert the AMD Clip Lever into the AMD Clip’s Clip Lever Slot, then hook

the opposite end on its Lug, press down on the Clip Lever and hook it

onto its Lug.

Lug

.COM

GS1000 / GS1000SE

•E-ATX / Standard ATX / microATX Compatible

* Supports Intel Dual Xeon server motherboards

•UP to 6 Hot Swap HDD Bays

* GS1000(3 Standard / 3 Optional)

* GS1000 SE(Optional)

•Tool-Free HDD Installation

•Airflow Optimized Design

•Vibration Absorbing HDD Dampers and Feet

•The World’s First Roller Rails for Smooth

& Easy PSU Installation

•Cable Compartment Behind the Motherboard

for Cable Management

•Dedicated Fan Compartment for Fanless PSU Users

•Up to a Total of 8 HDD Bays

* 2 Adaptors & Bezels included for use of two 5.25”bays as 3.5”Internal(HDD)/

External(FDD) Bays

GT1000

•High-End Gaming Enclosure Built with Sturdy

All Aluminum Panels

•Three Tool-Free Hinged Magnetic Panels

(2 Left, 1 Right) for Easy Installation and

Access to Components

•Tool-Free Installation of Disk Drives,

Fan Controlles, Audio Interfaces etc.

•Accommodates up to 6 Hard Drives

•Luxurious and Cool Aesthetics.

•Color Option: Black (Red LED Fans),

Titanium (Blue LED Panel).

For more information, please visit our website.

2) Fan Mate 2 Operation

Adjust the Fan Speed Control

Knob for RPM control.

Fan Speed Control Knob

In the case that you get a BIOS error beep:

①Rotate the Fan Speed Control Knob clockwise to the maximum setting.

②Disable CPU Fan Detected in BIOS setting or set the system monitoring

program’s CPU Fan RPM to the lowest setting.

※Certain motherboards will not boot if the CPU fan’s RPM is not detected. In this

case inquire to the motherboard’s manufacturer for additional details.

BIOS Booting Error

Otros manuales para CNPS9700 LED

Tabla de contenidos

Otros manuales de Hardware de computadora de ZALMAN

ZALMAN

ZALMAN CNPS8700 NT Manual de usuario

ZALMAN

ZALMAN CNPS20LQ Manual de usuario

ZALMAN

ZALMAN CNPS6000-Al Manual de usuario

ZALMAN

ZALMAN CNPS7000C-Cu/AICu Manual de usuario

ZALMAN

ZALMAN CNPS2X Manual de usuario

ZALMAN

ZALMAN ZM80C-HP Manual de usuario

ZALMAN

ZALMAN FS-V7 Manual de usuario

ZALMAN

ZALMAN ZM500-ST Manual de usuario

ZALMAN

ZALMAN CNPS10X Optima (2011) Manual de usuario

ZALMAN

ZALMAN ZM-WB3 Gold Manual de usuario

ZALMAN

ZALMAN ZM-2HC2 Manual de usuario

ZALMAN

ZALMAN CNPS7000C Series Manual de usuario

ZALMAN

ZALMAN S5 Manual de usuario

ZALMAN

ZALMAN CNPS9800 MAX Manual de usuario

ZALMAN

ZALMAN CNPS14X Manual de usuario

ZALMAN

ZALMAN VF900-Cu Manual de usuario

ZALMAN

ZALMAN CNPS2005-Plus Manual de usuario

ZALMAN

ZALMAN CNPS 8000 Manual de usuario

ZALMAN

ZALMAN CNPS8700 NT Manual de usuario

ZALMAN

ZALMAN ZM80D-HP Manual de usuario

ZALMAN

ZALMAN RESERATOR 1 Manual de usuario

ZALMAN

ZALMAN RESERATOR2 Guía de inicio rápido

ZALMAN

ZALMAN CNPS10X Quiet Manual de usuario

ZALMAN

ZALMAN ZM80D-HP Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario