ZALMAN CNPS9500 AT Manual de usuario

* Applies to all versions of CNPS9500.

* Please read before installation.

http://www.zalman.co.kr http://www.zalmanusa.com

CNPS9500

Intel Pentium 4

Socket 478 CPU

Intel

Dual Core Pentium/Pentium 4

Socket 775 CPU

AMD Sempron/AMD64

(Athlon 64 X2/Opteron/Athlon 64)

Socket 754/939/940 CPU

(English version)

User

’’

s Manual

All manuals and user guides at all-guides.com

all-guides.com

2) Fan

- Bearing Type : 2-Ball

- Rotation Speed : 1,350RPM ±10 % (Silent Mode)

2,600RPM ±10 % ( ow-noise Mode)

- Noise (dB) : 18.0dB ±10% (Silent Mode) - measured at 1m from noise source

27.5dB ±10% ( ow-noise mode) - measured at 1m from noise source

3) FAN MATE 2

- Output Voltage : 5V ~ 11V ±2 %

- Allowable Power : 6W or lower

(Note 1) The maximum weight for a cooler is specified as 450g for Intel Socket 775 and AMD Socket

754/939/940. Special care should be taken when moving a computer equipped with a cooler

that exceeds the specified weight limit. Zalman is not responsible for any damage that occurs

when moving a computer.

※

The specifications of any product may change without prior notice to improve performance.

3. Exploded View

Fan Support Fixing Bolt

Fan

Fan Support

CPU Block Cover

Heat sink

CPU Block Fixing Bolt

1. Features

1) 100% copper heatsink with aerodynamically optimized “tunnel” design for maximum cooling efficiency.

2) Innovative and patented, curved heatpipe design for a heat transfer capacity of up to 6 heatpipes with

just 3.

3) Optimized heatsink layout for maximum cooling efficiency with minimal materials.

4) 0.2mm ultra-slim fins for minimized weight and reduced airflow resistance.

5) Ultra quiet CNPS 92mm opaque fan with blue EDs.

6) Aerodynamically optimized heatsink for smoother airflow and minimal noise.

7) Compatible CPUs (Refer to “7. Compatible CPUs” on page 3. for more information.)

- Intel : All Dual Core Pentium CPUs (Socket 775)

All Pentium 4 CPUs (Socket 775/478)

- AMD : All Dual Core AMD Athlon 64 X2 CPUs (Socket 939)

All AMD Sempron/AMD64 CPUs (Socket 754/939/940)

8) Adjustable fan speed controller (FAN MATE 2) enables control of noise and fan speed.

1) Flower eatsink (F S)

CNPS9500

Model

Spec.

Materials

Weight(g)

Thermal Resistance

(°C/W )

Silent Mode

Normal Mode

Pure Copper

530

(1)

0.16

0.12

85(L) X 112(W) X 125(H)

3,698

Dimensions

(mm)

Dissipation Area (

㎠

)

2. Specifications

All manuals and user guides at all-guides.com

※

The specifications of any product may change without prior notice to improve performance.

󳣍Korean Patent Application No. 05-45737

󳣍Korean Design Applications No. 05-15303, 15304, 15306, 15307, 17970, 17971

󳣍Patent Applications pending in over 20 nations around the world including USA, EU, and Japan

. Patents

1) If excessive force is exerted on the fan, it may result in malfunction or damage to the product and/or the

computer.

2) Do not put your finger in the fan while spinning.

3) Keep the product away from the reach of children and pets.

4) Check the components list and condition of the product before installation. If any problem is found, contact

your place of purchase to obtain a replacement/refund.

5) Zalman Tech is not responsible for any damages arising from using the product outside of its intended

purpose.

6) CPU and/or motherboard may become damaged if the product is incorrectly installed.

Familiarize yourself with the “Installation” steps before installing the product.

5. Precautions

3) Components for Intel Dual Core Pentium / Pentium 4 (Socket 775)

󱆎

Four(4) Clip Support Fixing Bolts for

Socket 775

󱆏

One(1) Clip Support for Socket 775

󱆐

One(1) Backplate for Socket 775

2) Components for Intel Pentium 4 (Socket 478)

❿

Two(2) Clip Supports for Socket 478

󱆌

Two(2) Installation Bolts for Socket 478

󱆍

One(1) -Wrench

4) Components for AMD Sempron/AMD64 (Socket 754/939/940)

󱆑

Two(2) Nipples

1) Common Components

❶

CNPS9500

❷

Thermal Grease

❸

Fan Speed Controller (FAN MATE 2)

❹

Cable for FAN MATE 2

❺

Double-sided Tape

(to attach FAN MATE 2)

❻

One(1) S-Type Clip

❼

One(1) -Type Clip

❽

Four(4) Bolts (for installing the Cooler)

❾

User’s Manual

6. Components

󱆎

󱆏

󱆐

󱆑

❻❾

❶

❸

❺

❹

❷

❽

❼

❿

󱆌󱆍

All manuals and user guides at all-guides.com

※

The specifications of any product may change without prior notice to improve performance.

⑤⑤

Connect Power (Use FAN MATE 2)

◆

Please refer to FAN MATE 2 installation and usage on page 7.

1) Intel Dual Core Pentium / Pentium 4 - Socket 775

①①

Install Clip

Refer to “How to Install the CNPS9500’s Clip” on page 3 to correctly install the clip (S-Type,

⑫

) on

CNPS9500.

②②

Install Clip Support

Align the clip support for Socket 775 (

⑭

) and the backplate for Socket 775 (

⑮

) with the mounting

holes on the motherboard and fasten them together using the clip support fixing bolts (

⑬

The lever slot on the clip support (

⑭

) should be properly oriented on the hinged side of the socket

lever when installing.

※

The backplate support on the backplate for Socket 775 (

⑮

) can be removed if deemed unnecessary.

③③

Apply Thermal Grease

Clean off particles and residue from the top of

the CPU. Then spread the included thermal

grease (

②

) thinly on top of the CPU.

CPUCPU

CPU

※

Caution

When installing CNPS9500 on a motherboard with horizontally-oriented

retention guide, take extra care not to let the screwdriver exert excessive

force on the fan.

If excessive force is exerted on the fan, it may cause a malfunction.

Clip Support Fixing Bolt, ⑬

Clip Support for Socket 775, ⑭

Motherboard

Backplate for Socket 775, ⑮

Backplate Support

Socket ever Hinge

Socket ever

Socket Slot

CPU

④④

Place Cooler

Insert two bolts (

⑧

) into holes on the clip (S-Type,

⑥

) and place

CNPS9500 at the center of the CPU. Fasten the bolts slightly at

first. Then, fasten the bolts in an alternating manner until the clip

(

⑥

) is completely pressed against the clip supports.

Bolt, ⑧

Clip(S-Type), ⑥

CPU (IHS)

Thermal Grease

All manuals and user guides at all-guides.com

※

The specifications of any product may change without prior notice to improve performance.

2) Intel Pentium 4 - Socket 478

①①

Install Clip

Refer to “How to Install the CNPS9500’s Clip” on page 3 to correctly install the clip (S - Type,

⑥

) on

CNPS9500.

②②

Apply Thermal Grease

Clean off particles and residue from the top of

the CPU. Then spread the included thermal

grease (

②

) thinly on top of the CPU.

③③

Install Clip Support for Socket 478

Install the two clip supports for Socket 478

(

⑩

) on both sides of the retention guide as

shown in the diagram.

④④

Place Cooler

Insert two installation bolts for Socket 478 (

⑪

) into holes on the clip (S-Type,

⑥

) and place CNPS9500

at the center of the CPU. Using the -wrench (

⑫

), fasten the bolts for Socket 478(

⑪

) into each hole

on the clip support for Socket 478(

⑩

) slightly at first. Then, fasten the bolts (

⑪

) in an alternating

manner until the clip (

⑥

) is completely pressed against the clip supports.

※

When installing CNPS9500 on a motherboard with

horizontally-oriented retention guide, take extra care

not to let the -wrench (

⑫

) exert excessive force on

the fan. If excessive force is exerted on the fan, it

may cause a malfunction.

⑤⑤

Connect Power (Use FAN MATE 2)

◆

Please refer to FAN MATE 2 installation and usage on page 7.

Clip Support for

Socket 478, ⑩

Installation Bolt for Socket 478, ⑪

Clip(S-Type),

-wrench,

CPU (IHS)

Thermal Grease

All manuals and user guides at all-guides.com

all-guides.com

※

The specifications of any product may change without prior notice to improve performance.

⑤⑤

Connect Power (Use FAN MATE 2)

◆

Please refer to FAN MATE 2 installation and usage on page 7.

3) AMD Sempron/AMD64 - Socket 754/939/940

※

When CNPS9500 is installed on an AMD system, the existing cooler installation framework (retention

frame, backplate, screws) is used for the installation.

①①

Install Clip

Refer to “How to Install the CNPS9500’s Clip” on page 3 to correctly install the clip ( -Type,

⑦

) on

CNPS9500.

②②

Separate Retention Frame Fixing Screws

Unscrew the screws that fix the existing retention frame onto its place.

③③

Apply Thermal Grease

Clean off particles and residue from the top

of the CPU. Then spread the included thermal

grease (

⑦

) thinly on top of the CPU.

④④

Place Cooler

Place CNPS9500 at the center of the CPU. Fasten the retention

frame fixing screws onto the backplate through the outer holes

of the clip ( -type,

⑦

) slightly at first. Then, fasten the screws in

an alternating manner until the clip (

⑦

)

is completely pressed against the

retention frame.

※

When installing CNPS9500 on a motherboard with horizontally-oriented

retention guide, take extra care not to let the screwdriver exert excessive

force on the fan.

If excessive force is exerted on the fan, it may cause a malfunction.

◈

Motherboards with Pushpin - type Retention Frame need the included

nipples (

⒃

) and bolts (

⑧

) for installation of the cooler.

Remove the push-pins from the retention frame, and insert the nipples

(

⒃

) into it. Fasten them to the backplate using the bolts (

⑧

) and follow

these steps in order :

③

Apply Thermal Grease

④

Place Cooler

Screw

Clip( -Type),

Bolt,

Nipple,

Bolt,

Retention Frame

CPU ( id)

Thermal Grease

All manuals and user guides at all-guides.com

※

The specifications of any product may change without prior notice to improve performance.

10. FAN MATE 2 Installation and Usage

1) Installing FAN MATE 2 on the Inside of the System 2) Installing FAN MATE 2 on the Outside of the System

Connect the appropriate 3-pin connector on the

cable to the motherboard fan header and the

CNPS9500’s fan connector.

Pull the 6-pin connector out of the system

through the back and connect it to FAN MATE 2,

which should be installed on the case using the

included double-sided tape (⑤).

◆When the speed control knob on FAN MATE 2 is turned fully counter-clockwise, the fan operates in

Silent Mode. Turned fully clockwise, it operates in Normal Mode. You can select the desired fan speed

by turning the knob.

Note) FAN MATE 2 has been specifically designed for the fan of this product.

Zalman Tech Co., td. is not responsible for any damage to systems or CPUs caused by using it

with other types of fans.

11. Notes on Usage

1) Checking CPU Compatibility

Please refer to “Compatible CPUs” on page 3 to confirm that your CPU is compatible before using the

CPU cooler.

2) Cautions During Booting

When booting the computer, it may automatically power down after an alarm sound by a system

monitoring program to indicate that the CPU fan is rotating slowly. If this happens, turn the speed

control knob fully clockwise to increase the fan speed. Then set ‘CPU Fan Detected’ to ‘Disabled’ in

BIOS settings, or set the slowest rotational speed of the CPU fan in the system monitoring program to

less than or equal to 1300rpm.

Note) Some motherboards do not boot if the rotational speed of the CPU fan is below a certain rpm.

If the BIOS settings are updated, Silent Mode can be used. For more information on updating

your BIOS, please refer to your motherboard manufacturer's website. Disabling CPU fan speed

detection in BIOS settings does not affect computer performance.

3) OVERCLOCKING

Zalman Tech Co., td. is not responsible for any damage resulting from CPU OVERC OCKING.

Fan Connector

(CNPS9500)

Motherboard

Double - sided Tape

FAN MATE 2

6-Pin Connector

All manuals and user guides at all-guides.com

※

The specifications of any product may change without prior notice to improve performance.

When building a noiseless computer, use Zalman’s Noiseless Power Supply, CPU Cooler,

Case Fan, Fanless Northbridge Cooler, and Video Card Cooler to achieve stable performance

and maintain a noiseless environment.

12. Zalman Noise Prevention System

13. TNN (Totally No Noise) Computer Case

Noiseless Power Supply Fanless Northbridge Cooler Heatpipe HDD Cooler

Noiseless Case Fan Quiet VGA Cooler Multi Fan Controller

The TNN 500AF is the world's first absolutely noiseless, anti-dust computer case for high-end systems that

has been developed with Heatpipe Technology, HSC (Heat Source Contact) Power Technology, High

Capacity Extrusion Technique, and FMS (Flexible Mounting Structure) Design Technology by ZA MAN

Tech Co., td.

The TNN 500AF package includes a high performance aluminum computer case with an absolutely

noiseless cooling solution that does not require the use of a fan, making it ideal for :

1. Digital Audio Workstations (DAW) in broadcasting, recording, and postproduction studio control rooms.

2. Multi Media & Storage Servers for offices, educational facilities, and hotels.

3. ome Theater and Multi Media Systems for living rooms.

4. igh Performance Noiseless Workstations & Servers for SOHO

(Small Office Home Office) systems.

For more information, please visit the Zalman website.

All manuals and user guides at all-guides.com

Otros manuales para CNPS9500 AT

Tabla de contenidos

Otros manuales de Hardware de computadora de ZALMAN

ZALMAN

ZALMAN FC-ZV9 Manual de usuario

ZALMAN

ZALMAN CNPS9500 AT Manual de usuario

ZALMAN

ZALMAN CNPS8000A Manual de usuario

ZALMAN

ZALMAN CNPS7X Manual de usuario

ZALMAN

ZALMAN CNPS5100-Al Manual de usuario

ZALMAN

ZALMAN CNPS7700 LED Manual de usuario

ZALMAN

ZALMAN CNPS 4X Manual de usuario

ZALMAN

ZALMAN ZM80D-HP Manual de usuario

ZALMAN

ZALMAN CNPS7000 Manual de usuario

ZALMAN

ZALMAN FX100 Manual de usuario

ZALMAN

ZALMAN ZM-WB5 Plus Manual de usuario

ZALMAN

ZALMAN CNPS9800 MAX Manual de usuario

ZALMAN

ZALMAN VF900-Cu Manual de usuario

ZALMAN

ZALMAN CNPS 7600 Manual de usuario

ZALMAN

ZALMAN CNPS9500 AT Manual de usuario

ZALMAN

ZALMAN CNPS10X Extreme Manual de usuario

ZALMAN

ZALMAN CNPS8000B Manual de usuario

ZALMAN

ZALMAN RESERATOR1 V2 Guía de inicio rápido

ZALMAN

ZALMAN ZM-GWB3 Manual de usuario

ZALMAN

ZALMAN RESERATOR 1 Manual de usuario

ZALMAN

ZALMAN CNPS16X Manual de usuario

ZALMAN

ZALMAN FS-V7 Manual de usuario

ZALMAN

ZALMAN ZM-GWB2 Manual de usuario

ZALMAN

ZALMAN Z8 Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario