ZALMAN CNPS11X Extreme Manual de usuario

User's Manual

CNPS11X Series

Ver. 121106

To ensure safe and easy installation, please read

the following precautions

www.ZALMAN.com

Intel Socket 2011/1366/1156/1155/775 CPUs

AMD Socket FM2/FM1/AM3+/AM3/AM2+/AM2 CPU&APUs

.COM

EnglishEnglish

1. Precautions

2. Specications

1) Avoid inserting objects or hands into the fan while it is in operation to prevent

product damage and injuries.

2) Do not ingest the Thermal Grease, and avoid its contact with skin and eyes.

If contact is made with skin, wash off with water. If ingested or irritation persists,

seek medical attention.

3) To prevent possible injuries, gloves must be worn while handling this product.

4) Excessive force exerted on the fan may cause damage to the fan and/or

system.

5) Use and keep product away from reach of children.

6) Check the components list and condition of the product before installation.

If any problem is found, contact the retailer to obtain a replacement.

7) During transportation of the system, the cooler must be removed. Zalman is not

responsible for any damages that occur during the transport of a system.

8) Product design and specications may be revised to improve quality and

performance.

Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due to

external causes, including but not limited to, improper use, problems

with electrical power, accident, neglect, alteration, repair, improper

installation, or improper testing.

Model

Spec. CNPS11X Extreme CNPS11X Performa

Material

Pure Copper and Aluminum Pure Copper and Aluminum

Weight

600g 450g

Dimensions

135(L) Ⅹ 80(W) Ⅹ 154(H)㎜ 135(L) Ⅹ 80(W) Ⅹ 154(H)㎜

Bearing Long Life Bearing Long Life Bearing

Quiet

Mode

RPM 1,000 ~ 1,400rpm ± 10%

Noise

Level 17dBA ~ 24dBA ± 10%

Normal

Mode

RPM 1,000 ~ 1,950rpm ± 10% 1,000 ~ 1,600rpm ± 10%

Noise

Level 17dBA ~ 33dBA ± 10% 17dBA ~ 26dBA ± 10%

Thermal

Grease

Contents

3.5g 1g

Temperature

Range

-40℃~+150℃

(-40~+302℉)

-40℃~+150℃

(-40~+302℉)

.COM

English

3. Components

1) Common Components

AMD Clip

Intel Clip

2) Intel Components 3) AMD Components

Socket 2011/1366/1156/1155/775 Socket FM2/FM1/AM3+/AM3/AM2+/AM2

11X Extreme

Thermal Grease

[ZM-STG2]

11X Performa

Thermal Grease

[ZM-STG2M]

Loading Block Nuts Double-sided Tape

Backplate

11X Extreme

Resistor

[RC24P]

Cooler

Side Cap

Wrench

Silver Bolts B (3mm)

(Socket 1156/1155/775/AMD)

Silver Bolts A (4mm)

(Socket 2011)

Gold Bolts

(Socket 1366 )

User’s Manual

.COM

EnglishEnglish

4. Installation Requirements

CNPS11X Extreme CNPS11X Performa

1) Space Requirements

2) Air Guide Removal

3) Cooler Orientation

100 mm

137 mm

155 mm

The cooler’s installation requires an unobstructed space of 137mm(width),

100mm(length), and 155mm(height), with the CPU as a central reference point.

Please check if components such as ODDs and PSU protrude into the required space.

Air guides on enclosures must be removed before the cooler’s installation since

they protrude into the cooler’s required space.

As shown in the diagram below, it is recommended that the cooler be installed so that air

ows from the cooler toward the enclosure’s rear exhaust fan to be released.

※Recommended cooler orientation may differ according to the motherboard model.

Case Cover

Air guides

.COM

English

5. Installation

Intel Socket Installation

1) Intel Socket 2011 Installation

- Unfasten the Bolts on the Cooler’s Base one thread, insert the Intel Clip

between the Cover and the Base, and then refasten the Bolts.

Make sure the Intel Clip’s ingresses

are ush against

the protrusions of

the Base Cover.

Align

Intel Clip

- Apply a suitable amount of the included Thermal Grease on the CPU’s

surface and then fasten the Bolts to install the cooler.

Check the size of the silver-

colored bolts before installing

because silver-colored bolt A

and B have similar color. Gold Bolts

(Socket 1366)

Sliver Bolts A (4mm)

(Socket 2011)

Sliver Bolts B (3mm)

(Socket 1156/1155/

775/AMD)

Sliver Bolt A

(4mm)

Wrench

Caution

.COM

EnglishEnglish

Socket 775

Socket 1156/1155

Socket 1366

Take note of the orientation of the Nuts and the Side Caps.

Caution

2) Intel Socket 1366/1156/1155/775 Installation

①

Install Bolts to the Backplate according to the Socket Type and secure

with Side Caps.

② Socket 1366/1156/1155 Installation

Attach Double-sided Tape to the center of the Backplate and remove

the Double-sided Tape’s Cover.

※ Socket 1366/1156/1155 Installation does not require the Loading Block.

Double-sided Tape

.COM

English

③

Socket 775 Installation

Remove the Sticker Cover from the Lower Tier of the Loading Block and attach

to the Backplate.

Attach Double-sided Tape to the Loading Block and remove

the Double-sided Tape Cover.

Double-sided Tape

Loading Block

Caution

Please make note of the orientation of the Loading Block’s Installation.

.COM

EnglishEnglish

Please make sure that PWM Control Mode is activated in the

motherboard’s BIOS settings.

Caution

④

Align the Backplate’s Nuts with

the motherboard’s Clip Support

installation holes and then fasten

to the motherboard.

M/B

⑥

Connect the cooler’s 4-pin connector to the

motherboard’s CPU Fan header.

M/B

Gold Bolt

(Socket 1366)

Sliver Bolt B (3mm)

(Socket 1156/1155/775)

Wrench

⑤ Apply a suitable amount of the included Thermal Grease on the CPU’s

surface and then fasten the Bolts to install the cooler.

Check the size of the silver-

colored bolts before installing

because silver-colored bolt A

and B have similar color. Gold Bolts

(Socket 1366)

Sliver Bolts A (4mm)

(Socket 2011)

Sliver Bolts B (3mm)

(Socket 1156/1155/

775/AMD)

Caution

.COM

English

1) AMD Socket FM2/FM1/AM3+/AM3/AM2+/AM2 Installation

①

Unfasten the Bolts on the Cooler’s Base one thread, insert the AMD Clip

between the Cover and the Base, and then refasten the Bolts.

Make sure the AMD Clip’s ingresses

are ush against the protrusions of

the Base Cover.

Caution

Align

② Install Bolts to the Backplate according to the Socket Type and secure

with Side Caps.

RC24P

(Fan RPM resistor)

Motherboard

Connector

Tip

[CNPS11X Extreme Only]

B. AMD Socket Installation

AMD Clip

For Quiet Mode, please

connect RC24P to the Fan

Connector.

.COM

EnglishEnglish

Take note of the orientation of the Nuts and the Side Caps.

Caution

③

Remove the Sticker Cover from the Lower Tier of the Loading Block

and attach to the Backplate.

Caution

Please make note of the orientation of the Loading Block’s Installation.

Attach Double-sided Tape to the Loading Block and remove

the Double-sided Tape Cover.

Loading Block

Double-sided Tape

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de computadora de ZALMAN

ZALMAN

ZALMAN ZM-GWB2 Manual de usuario

ZALMAN

ZALMAN ZM-RF1 Manual de usuario

ZALMAN

ZALMAN CNPS9700 LED Manual de usuario

ZALMAN

ZALMAN CNPS7000C Series Manual de usuario

ZALMAN

ZALMAN Extreme Gaming VGA Cooler GV1000 Manual de usuario

ZALMAN

ZALMAN ZM-WB3 Gold Manual de usuario

ZALMAN

ZALMAN ZM-2HC2 Manual de usuario

ZALMAN

ZALMAN CNPS9X OPTIMA Manual de usuario

ZALMAN

ZALMAN MS800 Manual de usuario

ZALMAN

ZALMAN CNPS10X Extreme Manual de usuario

ZALMAN

ZALMAN CNPS16X Manual de usuario

ZALMAN

ZALMAN Optima CNPS8X Manual de usuario

ZALMAN

ZALMAN CNPS9900A LED Manual de usuario

ZALMAN

ZALMAN CNPS8900 Series Manual de usuario

ZALMAN

ZALMAN CNPS7000C-Cu/AICu Manual de usuario

ZALMAN

ZALMAN CNPS10X Flex Manual de usuario

ZALMAN

ZALMAN Z8 Manual de usuario

ZALMAN

ZALMAN AMD Athlon 64 Socket 754 CPU Manual de usuario

ZALMAN

ZALMAN CNPS9X OPTIMA Manual de usuario

ZALMAN

ZALMAN CNPS7500-Cu LED Manual de usuario

ZALMAN

ZALMAN CNPS5X PERFORMA Manual de usuario

ZALMAN

ZALMAN CNPS8700 NT Manual de usuario

ZALMAN

ZALMAN S5 Manual de usuario

ZALMAN

ZALMAN CNPS9500 AT Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario