Yamaha Acoustic Manual de usuario

SOFTWARE for MAGICSTOMP Installation Guide

SPECIAL NOTICES

• The software and this Installation Guide are exclusive copyrights ofYamaha Corporation.

• Copying of the software or reproduction of this Installation Guide in whole or in part by any means is expressly forbidden without the written

consent of the manufacturer.

•Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the

results of the use of this guide and the software.

• Copying of the commercially available music data is strictly prohibited except for your personal use.

• The screen displays as illustrated in this Installation Guide are for instructional purposes, and may appear somewhat different from the screens

which appear on your computer.

• Click on the red-colored text to jump to the related item in this Installation Guide.

• The OMS®and mark in this Owner’s Manual are the trademarks or registered trademarks of Opcode Systems, Inc.

• The company names and product names in this Installation Guide are the trademarks or registered trademarks of their respective companies.

• Future upgrades of application and system software and any changes in speciﬁcations and functions will be announced separately.

This Installation Guide assumes that you are already familiar with basic Windows/Macintosh

operations. If you are not, please refer to the owner’s manual which came with your Windows/Mac OS

software before using Sound Editor.

For information on software and hardware requirements and the interconnection of devices that are

required to use the Sound Editor for MAGICSTOMP, please refer to the Owner’s Manual that came with

your MAGICSTOMP.

The screen illustrations in this Installation Guide are mainly taken from Windows. Differences that exist

in the Macintosh version are duly shown and explained.

2SOFTWARE for MAGICSTOMP Installation Guide

For Windows Users

Software Installation

Uninstall (removing the installed

application)

You can remove the installed application software.

Select [START] (

→[Settings])

→[Control Panel]

→[Add/Remove

Programs]

→[Install/Uninstall], then select the application to be

removed and click [Add/Remove...].

Follow the on-screen instructions to uninstall the application.

The button names or menus may differ depending on the computer OS.

•

USB MIDI Driver

A USB-MIDI driver properly installed in the computer is necessary in order to

transfer data between the MAGICSTOMP and the computer.

Before installing the application, verify the OS used by your computer then

install.

●

Installing the driver on a Windows 98/

Me system

Start the computer.

2Insert the included CD-ROM into the CD-ROM drive.

3Disconnect the MAGICSTOMP’s power adaptor then use the supplied USB

cable to connect the USB jack on your computer (or USB hub), to the USB

jack on the MAGICSTOMP. Next, connect the MAGICSTOMP’s power

adaptor (switches the MAGICSTOMP on), and the “Add New Hardware

Wizard” automatically appears on the computer’s display.

nFor Windows Me users, check the radio button to the left of

“Automatic search for a better driver (Recommended)” and click

[Next]. The system automatically starts searching and installing

the driver. Proceed to Step 8. If the system does not detect the

driver, select “Specify the location of the driver (Advanced)” and

specify the CD-ROM drive’s “USBdrv_” folder to install the

driver.

4Click [Next].

The window below enables you to select the search method.

USB cable

MAGICSTOMP

Computer

Sound Editor

for

MAGICSTOMP

Driver

U99¤MAGICSTOMP

ó‡GAINﬁMSTRáTONE

Windows 98

Windows Me

SOFTWARE for MAGICSTOMP Installation Guide

5Check the radio button to the left of “Search for the best driver for your

device. (Recommended).” Click [Next]. The window below enables you to

select a location in which to install the driver.

6Check the “CD-ROM drive” box and uncheck all other items. Click [Next].

nThe system may ask you to insert a Windows CD-ROM while it

checks for the driver. Specify the USBdrv_ directory of the CD-ROM

drive (such as D:\USBdrv_\) and continue the installation.

nWhen using the Windows 98, specify the USBdrv_ directory of the

CD-ROM drive (such as D:\USBdrv_\) and continue the installation.

7When the system detects the driver on the CD-ROM and is ready for

installation, it displays the following screen.

Make sure that the “YAMAHA USB MIDI Driver” is listed, and click

[Next]. The system starts the installation.

8When the installation is complete, the following screen appears. Click

[Finish].

nSome computers may take about ten seconds or more to show this

screen after the installation is complete.

The driver has been installed.

Windows 98

Windows Me

4SOFTWARE for MAGICSTOMP Installation Guide

●Installing the driver on a Windows 2000

system

1Start the computer and use the “Administrator” account to log into

Windows 2000.

File Signature Veriﬁcation], and check the radio button to the left of “Ignore -

Install all ﬁles, regardless of ﬁle signature” and click [OK].

3Insert the included CD-ROM into the CD-ROM drive.

4Disconnect the MAGICSTOMP’s power adaptor then use the supplied USB

cable to connect the USB jack on your computer (or USB hub), to the USB

jack on the MAGICSTOMP. Next, connect the MAGICSTOMP’s power

adaptor (switches the MAGICSTOMP on), and the “Found New Hardware

Wizard” automatically appears on the computer’s display. Click [Next].

5Check the radio button to the left of “Search for a suitable driver for my

device. (Recommended).” Click [Next].

The window that appears enables you to select a location in which to install

the driver.

6Check the “CD-ROM drives” box and uncheck all other items. Click

[Next].

nThe system may ask you to insert a Windows CD-ROM while it

checks for the driver. Specify the “USBdrv2k_” directory of the CD-

ROM drive (such as D:\USBdrv2k_\) and continue the installation.

7When the installation is complete, the system displays “Completing the

Found New Hardware Wizard.” Click [Finish].

nSome computers may take about ten seconds or more to show this

screen after the installation is complete.

8Restart the computer. The driver has been installed.

●Installing the driver on a Windows XP

system

1Start the computer.

2Select [Start] →[Control Panel]. If the control panel appears as shown

below, click “Switch to Classic View” in the upper left of the window.

All control panels and icons will be displayed.

3Go to [System] →[Hardware] →[Driver Signing] →[File Signature

Veriﬁcation], and check the radio button to the left of “Ignore -Install all

ﬁles, regardless of ﬁle signature” and click [OK].

4Click the [OK] button to close System Properties, and then click “X” in the

upper right of the window to close the Control Panel.

5Insert the included CD-ROM into the CD-ROM drive.

6Disconnect the MAGICSTOMP’s power adaptor then use the supplied USB

cable to connect the USB jack on your computer (or USB hub), to the USB

jack on the MAGICSTOMP. Next, connect the MAGICSTOMP’s power

adaptor (switches the MAGICSTOMP on), and the “Found New Hardware

Wizard” automatically appears on the computer’s display.

7Check the radio button to the left of “Search for a suitable driver for my

device. (Recommended).” Click [Next]. The system starts the installation.

8When the installation is complete, the system displays “Completing the

Found New Hardware Wizard.” Click [Finish].

nSome computers may take about ten seconds or more to show this

screen after the installation is complete.

9Restart the computer. The driver has been installed.

SOFTWARE for MAGICSTOMP Installation Guide

●Installing the Sound Editor for

MAGICSTOMP

1Insert the included CD-ROM into the CD-ROM drive. The name of the CD-

ROM (X4770A0) appears in “My Computer”.

2Click on the CD-ROM icon to open, then double-click on the "Tools"

folder.

“Setup.exe” and some other ﬁles appear.

2Double click on the “Setup.exe” ﬁle.

The “Sound Editor for MAGICSTOMP” setup dialog appears.

3Follow the instructions on the display to install the application.

4After installation is complete, restart the computer.

After restarting the computer you’ll ﬁnd the “YAMAHA” folder has been

added (default: Program Files) and the “SGP Tools” folder has been created

in it.

Installation of the Sound Editor for MAGICSTOMP is complete.

•

Sound Editor Startup and Settings

After the drivers and Sound Editor for MAGICSTOMP are installed, follow the

steps below to start the Sound Editor for MAGICSTOMP application and set the

necessary settings.

1From the “Start” menu, select “Program”→“YAMAHA SGP

Tools”→“Sound Editor for MAGICSTOMP”→“Sound Editor for

MAGICSTOMP”.

2The Sound Editor for MAGICSTOMP starts.

After the MAGICSTOMP Setup tool bar shown below appears, click on the

MAGICSTOMP Setup button.

3Clicking the MAGICSTOMP Setup buttons opens the Setup dialog box. Set

the relevant MIDI ports (IN/OUT/THRU) to use the connected

MAGICSTOMP.

The following are normal settings.

In................................ Set to “YAMAHA ISB IN 0-1”

Out............................. Select “YAMAHA ISB OUT 0-1”

thru............................ Select “NONE”

4Click the Editor Setup Button in the library window’s tool bar to open the

Editor Setup dialog box.

5Set the appropriate in/output ports or device number to allow

communication between the Sound Editor and MAGICSTOMP.

nRefer to the “Sound Editor for MAGICSTOMP Manual” PDF

manual in the accompanying CD-ROM’s “Manual” folder for more

information on the Editor Setup Dialog box.

MAGICSTOMP Setup button

Editor Setup Button

6SOFTWARE for MAGICSTOMP Installation Guide

Now that setup is complete, you can use the Sound Editor for

MAGICSTOMP.

These settings are saved when you quit the Sound Editor for

MAGICSTOMP so the next time you start the application setup is not

required.

SOFTWARE for MAGICSTOMP Installation Guide

For Macintosh Users

Software Installation

•

Open Music System (OMS) 2.3.8

OMS allows you to use several MIDI applications on the Mac OS at the same time.

If you already have OMS installed on your computer, reinstallation is

unnecessary.

Start the computer.

Insert the included CD-ROM into the CD-ROM drive. The system displays

the CD-ROM icon on the desktop.

3From the CD-ROM →“International” folder →double-click the “OMS”

folder.

“Install OMS 2.3.8” will be displayed.

4Double-click on “Install OMS 2.3.8.”

OMS Setup Dialog will be displayed.

5Execute the installation by following the on-screen directions.

After the installation, select “Restart.”

nAfter the installation is complete, you may possibly encounter an

error message warning that the installer did not close. In this case, go

to the “File” menu and select “Quit” to close the installer. Then

reboot the computer.

After restarting the Macintosh, you will ﬁnd the “Opcode”/“OMSApplications”

folder on your computer (Hard Disk, as the default).

6From the CD-ROM →“International” folder →“OMS” folder →copy the

“OMS Setup forYamaha” folder to the “OMS Applications” folder (drag-

and-drop it to the folder).

In the “OMS Setup forYamaha” folder you will ﬁnd the OMS setup ﬁle for

the MAGICSTOMP labeled “USB-MAGICSTOMP”. Use this setup ﬁle to

setup OMS. (page9)

•

USB MIDI Driver

To operate the MAGICSTOMP from your computer via USB, you’ll need to

install the appropriate driver software.

The USB-MIDI driver is software that transfers MIDI data back and forth

between sequence software and the MAGICSTOMP via a USB cable.

Also, after installing the USB-MIDI driver, you will need to set up the OMS

(page9).

1Start the computer.

2Insert the included CD-ROM into the CD-ROM drive. The system displays

the CD-ROM icon on the desktop.

3From the CD-ROM →“International” folder →“USBdrv_” folder →

double-click the “Install USB MIDI Driver” icon.

4The “Install Location” box displays the destination of the installation. If

you wish to change the destination disk or folder, use the [Switch Disk]

button and the pop-up menu to specify the desired destination.

nAs this box usually displays the start-up disk as the destination,

nothing needs to be changed.

5Click the [Install] button.The system displays the following message: “This

installation requires your computer to restart after installing this software.

Click Continue to automatically quit all other running applications.” Click

[Continue].

nTo cancel the installation, click [Cancel].

USB cable

MAGICSTOMP

DriverOMS

Computer

Sound Editor

for

MAGICSTOMP

U99¤MAGICSTOMP

ó‡GAINﬁMSTRáTONE

8SOFTWARE for MAGICSTOMP Installation Guide

6The installation starts. If the driver has already been installed, the following

message appears. To return to step 3, press [Continue]. To complete the

installation, click [Quit].

7When the installation is complete, the system displays the following

message: “Installation was successful.You have installed software which

requires you to restart your computer.” Click [Restart]. The computer

automatically restarts.You can locate the installed ﬁles in the following

locations:

• System Folder | Control Panels |YAMAHA USB MIDI Patch

• System Folder | Extensions | USBYAMAHA MIDI Driver

• System Folder | OMS Folder |YAMAHA USB MIDI OMS Driver

Installing the Sound Editor for

•

MAGICSTOMP

1Start the computer.

2Insert the included CD-ROM into the CD-ROM drive. The system displays

the CD-ROM icon on the desktop.

3From the CD-ROM →“International” folder →“Tools” folder →double-

click on the “SoundEditorForMAGICSTOMPe.sea” folder.

The ﬁle expands and the “Install Location” box displays the destination of

the installation.

4Select the destination for installation and click the “Install” button.

Installation of the Sound Editor for MAGICSTOMP is now complete.

SOFTWARE for MAGICSTOMP Installation Guide

Setup the Sound Editor

After installation of the drivers and Sound Editor for MAGICSTOMP is

complete, follow the steps below to start the Sound Editor and make the

appropriate settings.

•

Setting up OMS

Use a USB cable to connect the USB terminal of the computer (or the USB

hub) to the USB terminal of the MAGICSTOMP and turn the

MAGICSTOMP’s power on (connect the power adaptor).

Start the computer.

3Open the “Opcode” →“OMSApplication” folders, then in the “OMS Setup

forYamaha” folder double-click on the “USB-MAGICSTOMP” studio

setup ﬁle to start the OMS Setup.

nThe “USB-MAGICSTOMP” ﬁle was copied to your computer’s hard

disk in the procedure on page7. If the ﬁle has not been copied to your

computer’s hard disk, follow the step 7 described on Open Music

System (OMS) 2.3.8” on page 7. and copy the ﬁle to you hard disk.

4After starting the OMS Setup, the Studio setup ﬁle double-clicked in step

3opens.

nIf “ ” is not indicated at the right of the setup ﬁle name, select

“Make Current” from the “File” menu and execute the save

operation.

The OMS studio setup has been completed.

nAfter the OMS studio setup above has been completed, your

computer will recognize only the MAGICSTOMP as a MIDI

instrument. If you use another MIDI instrument in addition to the

MAGICSTOMP or you add a second MAGICSTOMP to the existing

system, you should create an original Studio Setup ﬁle. For details,

refer to the on-line manual supplied with the OMS.

nThe included OMS studio setup ﬁle may not function even if you

follow the above procedure, depending on your Macintosh/Mac OS

version. (MIDI data cannot be transmitted/received even if the setup

becomes available.)

In this situation, connect your Macintosh to the MAGICSTOMP via

the USB cable and follow the procedure below to re-create the setup

ﬁle.

1Start OMS Setup and select “New Setup” from the “File” menu.

2The “OMS Driver Search” dialog appears. Remove the check from

the “Modem” and “Printer” check boxes, and click [Search] to

execute the device search.

If the Search operation has been completed successfully, the [USB-

MIDI] device is displayed in the OMS driver setting dialog.

3Click the [OK] button to search for ports. Port 1, Port 2 ... appears

in the dialog. Mark the appropriate checkbox of the port and click

the [OK] button to store the setting.

Setting up the Sound Editor for

•

MAGICSTOMP

1Open “Chooser” from theApple Menu, then open and disable “Apple Talk”.

nIf Apple talk is active, an alert will appear when the Sound Editor

starts. If so, select “Set to OFF”. It will take some time forApple Talk

to be disabled.

2In the “Sound Editor for MAGICSTOMP E” folder on your hard disk,

double-click on the “SoundEditorForMAGICSTOMP” icon.

3The Sound Editor for MAGICSTOMP application starts up.

4From Sound Editor for MAGICSTOMP’s “MIDI” menu, select “OMS Port

Setup”. The “OMS Port Setup” dialog box appears.

5In the following example, the MAGICSTOMP is the MIDI device and its

settings are applied to OMS.

Keyboard Thru.............Set to OFF (no check)

MIDI In.........................Select “ MAGICSTOMP 1’

MIDI Out......................Select “ MAGICSTOMP 1’

6Click “OK” to close the dialog box.

With this setup is complete and the Sound Editor for MAGICSTOMP is ready to

use. These settings are saved when you quit the Sound Editor for

MAGICSTOMP so the next time you start the application setup is not required.

Indicates this setup is available

10 SOFTWARE for MAGICSTOMP Installation Guide

For Windows/Macintosh Users

About the USB Driver Setup window

From this window, you can change the MIDI port number transmitted to the MAGICSTOMP from the one set in the Sound Editor for MAGICSTOMP. (In the

MAGICSTOMP’s case, the default settings do not need to be changed.)

For Windows, select [START] (→[Settings]) →[Control Panel] →[MIDI-USB Driver] to open the driver setup window.

For the Mac, select [Apple] menu →[Control Panels]→[YAMAHA USB MIDI Patch] to open the setup window.

The default settings are as follows.

Port number MIDI OUT terminal (Thru

Port number*) MIDI IN terminal

(Track Port number)

1MIDI OUT (1) MIDI IN (1)

Otros manuales para Acoustic

Tabla de contenidos

Otros manuales de Software de Yamaha

Yamaha

Yamaha 01V96 Manual de usuario

Yamaha

Yamaha mLAN mLAN Driver Manual de usuario

Yamaha

Yamaha Loopfactory AN200 Manual de usuario

Yamaha

Yamaha S03 voice editor Manual de usuario

Yamaha

Yamaha MOTIF XS6 Manual de usuario

Yamaha

Yamaha DM 1000 Manual de usuario

Yamaha

Yamaha PM1D Manager V2 Instrucciones y recetas

Yamaha

Yamaha LS9-16 Manual de usuario

Yamaha

Yamaha PM1D Manager V2 Instrucciones y recetas

Yamaha

Yamaha FIRESTATION MLAN PATCHBAY Manual de usuario

Yamaha

Yamaha LS9 Editor Manual de usuario

Yamaha

Yamaha RS7000 Ver.1.2 Instrucciones de instalación y funcionamiento

Yamaha

Yamaha MOTIF XF Manual de usuario

Yamaha

Yamaha IMX644 Manager Manual de usuario

Yamaha

Yamaha Loopfactory DX200 Manual de usuario

Yamaha

Yamaha MOTIF RACK Music System Manual de usuario

Yamaha

Yamaha USB Manual de usuario

Yamaha

Yamaha CobraNet MY16-CII Manual de usuario

Yamaha

Yamaha mLAN Driver Manual de usuario

Yamaha

Yamaha SPX2000 Editor Manual de usuario

Yamaha

Yamaha CL3 Manual de usuario

Yamaha

Yamaha M7CL StageMix V1.5 Manual de usuario

Yamaha

Yamaha Sound Editor ver. 2.10 Manual de usuario

Yamaha

Yamaha TOOLS for MY16-mLAN Manual de usuario

Manuales populares de Software de otras marcas

COMPRO

COMPRO COMPROFM Manual de usuario

Muratec

Muratec OFFICEBRIDGE ONLINE Manual de usuario

Oracle

Oracle Contact Center Anywhere 8.1 Manual de usuario

Adobe

Adobe 65007312 - Photoshop Lightroom Manual

Avaya

Avaya NULL One-X for RIM Blackberry Manual de usuario

HP ProLiant BL420c Manual de usuario

PS Audio

PS Audio PowerPlay Manual del propietario

Brady

Brady LOCKOUT PRO 3.0 Manual de servicio

Avaya

Avaya Interaction Center Manual de usuario

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manual

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario

Oracle

Oracle Application 9i Manual de usuario

Acer

Acer RDM Manual de usuario

Canon

Canon Vixia HF21 Manual de usuario

Canon

Canon ZR950 Manual de usuario

Samsung

Samsung Auto Backup Manual de usuario

Polycom

Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manual de usuario