XYZ Printing PartPro200 xTCS Manual de usuario
Safety Precautions 2
Product Descriptions 3
Unpacking and Installation 5
Touch Screen Menu, Functions and Messages 7
Function Operation and Instructions 8
Printing 21
Scanning 22
Support detail 25
User manual ENG
The manual is mainly intended for users to understand how to use the
PartPro200 xTCS 3D printer (“200 xTCS”) correctly. In this manual,
users can learn more about the operating tips, application skills and
maintenance of the 200 xTCS 3D printer.
New member is required to register account on http://support.
xyzprinting.com before able to download latest manual &
software for better user experience.
For more information on the 200 xTCS, please contact your local
dealer or visit the ofcial website of XYZprinting: http://www.
xyzprinting.com.
HD23FC1S166
PartPro200 xTCS
P2P2
Safety Precautions
Safety and Compliance
Important Safety Precautions
Trademarks
Maintenance and Service
CAUTION
Heavy object.
2 person lift
required
Watch Your Hands.
●Do not move the machine by yourself as it is heavy.
●Do not place the printer in a dusty, humid or outdoor environment.
●Do not place the printer on a soft or tilted surface. Otherwise, the machine will fall / ip over and become damaged or
cause personal injury.
● Do not leave the product or power cord to unattended children. Otherwise, personal injury or electric shock might occur.
●Use the provided power cord. Otherwise, incorrect grounding might lead to damage.
●Do not place any liquid container on top of the product. Otherwise, overow or spill might go into the machine and pose
the risks of danger or safety concern.
●Do not wipe the printer with alcohol or ammable chemicals. Otherwise, danger might occur.
●Do not move the machine when it’s powered on.
●Do not reach into the machine with your hands during operation. Otherwise, risks of impact from moving printing parts or
burn from high temperature might occur.
●The machine becomes hot during operation and thus run in high temperature. Do not touch or replace parts when they
are not cooled down.
●After startup, the parts in the machine will heat up or move depending on the user’s instructions. During product
operation, do not touch or block the operation of the parts.
●Weak odors may be generated during the printing process. We recommend working in a well-ventilated and open area to
ensure operational comfort.
●Defect reparation must be carried out according to the contents of this instruction manual. Where the defect cannot be
repaired, please contact your printer dealer or the customer service center.
When the printer needs to be serviced during the term of the warranty, it is recommended that the machine is packed with
original packaging materials prior to shipment. For this purpose, the packaging materials are better to be kept. If other
packaging materials are used instead, the printer might be damaged during transportation. We reserve the right to assess
relevant service fees.
Please read through this manual and all safety precautions carefully before using, operating, unpacking, replacing, remov-
ing any part or maintaining this product. Please also comply with the instructions of relevant safety precautions.
All trademarks and registered trademarks are the properties of their respective owners.
P3P3
Product Descriptions
Product exterior
1
3
2
4
7
8
9
11
10
6
5
1. 5 inch color touch panel 2. Auto-feeding module 3. Print head 4. Print bed+EZ removable rubber magnet
5. Scan module 6. Filament spool holder 7. USB Port 8. USB Port (WiFi dongle)
9. Power switch 10. USB Port (To PC) 11. Power jack
P4P4
Product Descriptions
Specications
The following tools are intended for use under the guidance or guardianship of an adult only. Do not allow children unfamiliar with the
tools to have access to them in case of danger.
●Make sure the maintenance work of the printer is carried out when the print bed has cooled down.
●When printing is completed and the print bed is cooled down to room temperature, the printed object can be removed from the print bed
with the scraper.
●Filament residues generated during the course of printing may be stuck on the print head and gears of the printing module. The printing
quality and printer operation as well as the measurement of the print bed may be affected. When this happens, clean the printing
module with the wire brush.
31 2 4 5 1. Scraper
2. Wire brush
3. Gear cleaning brush
4. Feed hole cleaning wire
5. Print head cleaning wire
Precautions and Instructions of Maintenance Tools
Accessory Checklist
1 2 3 4
11
5 6
12 13 1514
7 8
9 10
1. User Manual 5. USB Cable 9. PC Mylar x 2pcs 13. Clear Tube
2. USB Drive 6. EZ Removable Rubber Magnet 10. Mask Tape x 3pcs 14. Calibrating Plate
3. 3D Color-inkjet PLA 7. Top Cover 11. WiFi Dongle 15. Scan Backboard
4. Power Cord 8. Guide Tube 12. Pair Of Gloves
Printing
Printing technology 2D pattern: Inkjet printing
3D structure: Fused lament fabrication (FFF)
Dimensions and Weight
Dimensions (W*D*H) 600* 581* 640 mm
Net weight 32 Kg
Gross weight 43 Kg
Performance
Printing dimensions (W*D*H) Mono color printing (without inkjet printing)
200 x 200 x 150 mm
Full color printing
185 x 185 x 150 mm
Thickness of printed layer 0.1 mm ~0.4 mm
Alignment precision X/Y : 0.0125 mm
Auto calibration Yes
Auto feeding Yes
Ofine standalone printing Yes
Materials
3D printing materials 3D Color-inkjet PLA, PLA, Tough PLA, PETG
Filament diameter 1.75 mm
Ink type CMYK cartridge with separate colors
Hardware
Print head diameter 0.4mm
User interface 5” color touch screen
Print bed Non-heated, removable
Transmission USB 2.0 drive / USB cable / wireless transmission
Software
User software XYZmaker
Supported le format AMF, OBJ, STL, XYZ Format (.3w), .3CP, .3MF
Operating system Mac OS X 10.10 / 10.11 / 10.12
Windows 7 /8/10 (64-bit)
Temperature
Machine operating temperature 15-30°C
Cartridge storage temperature 15-35°C
Filament storage temperature 0-38°C
P5P5
Unpacking and Installation
Remove the packaging materials, top cover box, assessory box and plastic cover.
3
Move the printer to a table or plat-
form. (Do not move the printer by
yourself as it is heavy.)
1
Remove the plastic wrap and PP.
2
8
Remove the foam next to the guide screws on both sides, and then remove the foam under
the print bed.
Remove the tape on the
body (4 in total).
4
Open the front door. Remove
the tape from the supporting
materials and print bed.
6
Remove the foam on the
cartridge holder.
7
Open front door, remove the tape at mark printer door
post.
5
Remove the cable tie and foam in front and back of the front
door.
9
P6P6
Unpacking and Installation
There is a sheet of PC lm to
rubber magnet with a double
sided adhesive, this PC lm is
replaceable, please replace it
when it's dirty or broken.
Note
1. Check if the print bed calibration screws
was stuck.
2. Used to 2 thumb to push up the printbed
to release the calibration screw.
Precautions
Conrm the rubber magnet is well placed on the print bed.
14
Please follow the order as image instruction, attach the PC
mylar (accessory 9) and mask tape(accessory 10) on the EZ
removable rubber magnet(accessory 6).
13
Ensure that the one end of guide tube(Accessory 8) has been tightly. inserted into the printing module
port, then insert the other end into the clear tube (Accessory 13) to the end.
10
Mask Tape
PC Mylar
EZ Removable
Rubber Magnet
11 12
Insert the other end of the guide tube into the feed module
and secure it tightly.
Feed the guide tube through the top cover then attach the
top cover to the machine.
P7P7
Touch Screen Menu, Functions and Messages
This includes Filament, Ink Load
and Unload.
Filament/Ink loading
and unloading
This menu can be used to import
les (.3cp) from a USB drive to the
machine for printing without a com-
puter.
This includes the functions in Home
Page 1:
Settings of the Print-Bed, Print-
Head, Filament, Ink and Scan
Module.
Next page includes
WiFi, Sound, Statistics, Language
and Display.
The last page includes
Model, Version, Reset and Legal
Info.
Settings
USB Printing Menu
Main screen
P8P8
Function Operation and Instructions
2. Place the lament on the
spool holder.
1. Please cut the lament at 45
angle before auto loading the
lament into the printer. During
loading lament process, the
lament should be straighten at
least 4” of the Filament end as
shown in pictures.
A. Load/unload laments
Make sure the lament rotates
clockwise when pulled.
Note
3. Tap Filament Load and
Unload in the main screen and
select Filament.
4. Tap Filament.
5. Tap Load. 6. Conrm the operation. 7. Insert the lament into the feed module, it will be automatically loaded.
8. Check if the temperature of the print head goes up to its operating temperature (Color PLA from
XYZprinting) after the lament is loaded. Once the set temperature is reached, the feeding motor will
feed the lament along the guide tube into the print head.
9. Once lament has extruded
from the print head, the lament
will be successfully loaded.
Tap the screen to conrm and
continue.
Load laments
A1 Filament
Unloading laments
A2 Filament
1. Tap Filament Load and
Unload on the main screen.
2. Tap “Unload” and conrm the
operation.
3. Conrm the unloading
operation.
4. When the print head has
been warmed up to 220 °C,
the feeding motor will eject the
lament.
5. When the unloading
operation completes, tap to
conrm.
P9P9
Function Operation and Instructions
200 xTCS will prompt you to rell material.
Rell Material
A3 Filament
Unload the prints
1. Check if the USB drive is
plugged to the machine.
2. Tap the USB Printing Menu in
the main screen.
3. Select the file you want to
print.
5. The screen will show the
print percentage when printing.
The Pause, Stop, and Rell
are shown below the print
percentage.
4. Check file information and
tap “Print”.
B. USB printing
By default, the front door will be
locked when printing. If you want to
change this setting, go to Setting >
Door Lock to change it.
Note
Please removed the EZ Removable Rubber Magnet with printed object together from the printer.And
peel off the printed object from the rubber magnet.
B1
Please avoid touch-
ing the led strip of the
printer because the
LED strip will be slight
hot due to long hours
of been light on.
1. Tap the icon when printing.
7. The lament will be
automatically loaded.
5. Replace the empty spool with a new one. (please refer to the
LOADING section in this manual) and then tap "PROCEED" .
2. The screen will show lament
status, please tap "Rell" .
8. Check if lament is extruded from the nozzle, after conrmation,
the printer will resume printing.
3. Conrm the operation.
6. The nozzle will be preheat and notify you when to insert lament
into the feed module.
4. The nozzle will be preheated
and the lament will be
unloaded automatically.
P10P10
The 200 xTCS uses four color inks which can be replaced separately.
C. Ink Cartridge Installation
Function Operation and Instructions
1. Prepare several paper towels and the
ink cartridge.
2. Unpack the ink cartridge. 3. Remove the cartridge cover.
Ink Guidance
6. Check if the ink transferred to the
paper towel displays two straight lines.
If so, ink guidance is successfully
completed. Once ink guidance is done,
install the ink cartridge.
4. Press the cartridge head against the
paper towel to transfer some ink onto it.
5. If the ink did not transfer well, try
putting the paper towel on the table and
hold the ink pressed on the paper towel.
7. If the ink did not transfer well, please
wet the paper towel with 75% Alcohol to
wipe the ink. After you clean the inkjet,
check to see if the ink transferred.
To prevent the opened ink cartridge from drying out when a print is
nished or the printer will be idle for days, follow the procedure to store
the cartridge:
1. Clean the nozzle of the ink cartridge with alcohol.
2. Seal the ink cartridge with the protective cover, and store the cartridge
in room temperature at 15 ~ 35 degree.
For the best print quality, clean the nozzle of the cartridge with alcohol
after removing the protective cover from the cartridge, and then install the
cartridge back to the printer before the next print.
Note
Tabla de contenidos
Idiomas:
Otros manuales de Impresora 3D de XYZ Printing
XYZ Printing
XYZ Printing da Vinci 1.1 Plus Manual de usuario
XYZ Printing
XYZ Printing da Vinci Jr.1.0w Manual de usuario
XYZ Printing
XYZ Printing da Vinci Super Manual de usuario
XYZ Printing
XYZ Printing da Vinci 1.0 Pro Manual de usuario
XYZ Printing
XYZ Printing Nobel 1.0 Manual de usuario
XYZ Printing
XYZ Printing da Vinci Jr. 1.0 Manual de usuario
XYZ Printing
XYZ Printing da Vinci 1.0 Manual de usuario
XYZ Printing
XYZ Printing PartPro150 xP Manual de usuario
XYZ Printing
XYZ Printing da Vinci Mini Series Manual de usuario
XYZ Printing
XYZ Printing da Vinci Mini Series Cómo utilizar
XYZ Printing
XYZ Printing da Vinci Jr. 1.0 Manual de usuario
XYZ Printing
XYZ Printing da Vinci 2.0 Duo Manual de usuario
XYZ Printing
XYZ Printing da Vinci 1.0 Manual de usuario
XYZ Printing
XYZ Printing Vinvi 2.0A Duo Manual de usuario
XYZ Printing
XYZ Printing Nobel 1.0A Manual de usuario
XYZ Printing
XYZ Printing da Vinci 1.0 Pro 3in1 Manual de usuario
XYZ Printing
XYZ Printing da Vinci Color mini Manual de usuario
XYZ Printing
XYZ Printing da Vinci 2.0 Duo Manual de usuario
XYZ Printing
XYZ Printing ds Vinci Color Manual de usuario
XYZ Printing
XYZ Printing da Vinci Jr.1.0 Manual de usuario
