XYZ Printing Da Vinci Super Manual de usuario

Safety Precautions 2

Product Descriptions 3

Unpacking and Installation 5

Touch Screen Menu, Functions and Messages 7

Function Operation and Instructions 8

Printing 19

Support detail 20

XYZprinting 3D Printer

User manual ENG

The manual is mainly intended for users to understand how to

use the da Vinci Color 3D printer (“da Vinci Color”) correctly.

In this manual, users can learn more about the operating tips,

application skills and maintenance of the da Vinci Color 3D printer.

Please refer support.http://support.xyzprinting.com to download

latest manual & software for better user experience.

New member is required to register account on the website

before able to access to those resources.

For more information on the da Vinci Color 3D printer and the

complete XYZprinting product line, please contact your local dealer or

visit the ofcial website of XYZprinting: http://www.xyzprinting.com.

Please read through this manual and all safety precautions carefully before using, operating, unpacking, replacing, remov-

ing any part or maintaining this product. Please also comply with the instructions of relevant safety precautions.

●Do not move the machine by yourself as it is heavy.

●Do not place the printer in a dusty, humid or outdoor environment.

●Do not place the printer on a soft or tilted surface. Otherwise, the machine will fall / ip over and become damaged or

cause personal injury.

● Do not leave the product or power cord to unattended children. Otherwise, personal injury or electric shock might occur.

●Use the provided power cord. Otherwise, incorrect grounding might lead to damage.

●Do not place any liquid container on top of the product. Otherwise, overow or spill might go into the machine and pose

the risks of danger or safety concern.

●Do not wipe the printer with alcohol or ammable chemicals. Otherwise, danger might occur.

●Do not move the machine when it’s powered on.

●Do not reach into the machine with your hands during operation. Otherwise, risks of impact from moving printing parts or

burn from high temperature might occur.

●The machine becomes hot during operation and thus run in high temperature. Do not touch or replace parts when they

are not cooled down.

●After startup, the parts in the machine will heat up or move depending on the user’s instructions. During product

operation, do not touch or block the operation of the parts.

●Weak odors may be generated during the printing process. We recommend working in a well-ventilated and open area to

ensure operational comfort.

●Defect reparation must be carried out according to the contents of this instruction manual. Where the defect cannot be

repaired, please contact your printer dealer or the customer service center.

All trademarks and registered trademarks are the properties of their respective owners.

When the printer needs to be serviced during the term of the warranty, it is recommended that the machine is packed with

original packaging materials prior to shipment. For this purpose, the packaging materials are better to be kept. If other

packaging materials are used instead, the printer might be damaged during printing. We reserve the right to assess rele-

vant service fees.

Safety Precautions

Safety and Compliance

Important Safety Precautions

Trademarks

Maintenance and Service

CAUTION

Heavy object.

2 person lift

required

Watch Your Hands.

Product Descriptions

Product exterior

1. 5 inch color touch panel 2. Auto-feeding module 3. Print head 4. Print bed+EZ removable rubber magnet

5. Filament spool holder 6. USB Port 7. USB Port (WiFi dongle) 8. Power switch

9. USB Port (To PC) 10. Power jack

P4P4

Precautions and Instructions of

Maintenance Tools

Specications

31 2 4 5

Printing

Printing technology 2D pattern: Inkjet printing

3D structure: Fused lament fabrication (FFF)

Dimensions and Weight

Dimensions (W*D*H) 600* 581* 640 mm

Net weight 32 Kg

Gross weight 43 Kg

Performance

Printing dimensions (W*D*H) Mono color printing (without inkjet printing)

200 x 200 x 150 mm

Full color printing

185 x 185 x 150 mm

Thickness of printed layer 0.1 mm ~0.4 mm

Alignment precision X/Y : 0.0125 mm

Auto calibration Yes

Auto feeding Yes

Ofine standalone printing Yes

Materials

3D printing materials 3D Color-inkjet PLA, PLA, Tough PLA, PETG

Filament diameter 1.75 mm

Ink type CMYK cartridge with separate colors

Hardware

Print head diameter 0.4mm

User interface 5” color touch screen

Print bed Non-heated, removable

Transmission USB 2.0 drive / USB cable / wireless transmission

Software

User software XYZmaker

Supported le format AMF, PLY, OBJ, STL, 3CP

Operating system Mac OS X 10.10 / 10.11 / 10.12

Windows 7 /8/10 (64-bit)

Linux 14.04

Temperature

Machine operating temperature 15-30°C

Cartridge storage temperature 15-35°C

Filament storage temperature 0-38°C

The following tools are intended for use under the guidance or guard-

ianship of an adult only. Do not allow children unfamiliar with the tools

to have access to them in case of danger.

Product Descriptions

Accessory Checklist

1234

5 6

7 8

1. Quick Guide 7. Top Cover

2. USB drive 8. Guide Tube

3. 3D Color-inkjet PLA 9. PC Mylar x 2

4. Power cord 10. Mask Tape

5. USB cable 11. WiFi Dongle

6. EZ Removable Rubber Magnet 12. Pair of gloves

●Make sure the maintenance work of the printer is carried out when

the print bed has cooled down.

●When printing is completed and the print bed is cooled down to room

temperature, the printed object can be removed from the print bed

with the scraper.

●Filament residues generated during the course of printing may

be stuck on the print head and gears of the printing module. The

printing quality and printer operation as well as the measurement of

the print bed may be affected. When this happens, clean the printing

module with the wire brush.

1. Scraper 4. Feed hole cleaning wire

2. Wire brush 5. Print head cleaning wire

3. Gear cleaning brush

910

Unpacking and Installation

Remove the packaging materials, top cover box, assessory box and plastic cover.

Remove the foam next to the guide screws on both sides, and then remove the foam under the print bed.

Remove the tape on the body (4 in

total).

Move the printer to a table or plat-

form. (Do not move the printer by

yourself as it is heavy.)

Remove the plastic wrap and PP.

Open the front door. Remove the

tape from the supporting aterials

and print bed.

Remove the foam on the cartridge

holder.

Open front door, remove the tape at mark printer door post

P6P6

Place the top cover down with the

guide tube going through the hole in

the top.

Insert the guide tube through the top

cover, and then insert one end into

the printing module.

Conrm the rubber magnet is well placed on the print bed.

Insert the other end of the guide tube into the feed module and

secure it tightly.

Remove the cable tie and foam in front and back of the front door.

Unpacking and Installation

There is a sheet of PC film to

rubber magnet with a double

sided adhesive, this PC film is

replaceable, please replace it

when it's dirty or broken.

Note

1. Check if the print bed calibration

screws was stuck.

2. Used to 2 thumb to push up the print-

bed to release the calibration screw.

Precautions

Touch Screen Menu, Functions and Messages

This includes Filament, Ink Load

and Unload.

Filament/Ink loading

and unloading

This menu can be used to import

les (.3cp) from a USB drive to the

machine for printing without a com-

puter.

This includes the functions in Home

Page 1:

Settings of the Print-Bed, Print-

Head, Filament and Ink.

Next page includes

WiFi, Sound, Statistics, Language

and Display.

The last page includes

Model, Version, Reset and Legal

Info.

Settings

USB Printing Menu

Main screen

P8P8

Unload the prints

Function Operation and Instructions

1. Check if the USB drive is

plugged to the machine.

2. Tap the USB Printing Menu in

the main screen.

3. Select the file you want to

print.

5. The screen will show the

print percentage when printing.

The Pause, Stop, and Rell

are shown below the print

percentage.

4. Check file information and

tap “Print”.

2. Place the lament on the spool

holder.

1. Please cut the lament at 45

angle before auto loading the

lament into the printer. During

loading lament process, the lament

should be straighten at least 4” of the

Filament end as shown in pictures.

A. USB printing

B. Load/unload filaments

Make sure the lament rotates

clockwise when pulled.

Note

3. Tap Filament Load and Unload in

the main screen and select Filament.

4. Tap Filament.

5. Tap Load. 6. Conrm the operation. 7. Insert the lament into the feed module, it will be automatically loaded.

8. Check if the temperature of the print head goes up to 210 °C (Color PLA from XYZprinting) after the lament is

loaded. Once the set temperature is reached, the feeding motor will feed the lament along the guide tube into the

print head.

9. Once lament has extruded from

the print head, the filament will be

successfully loaded. Tap the screen

to conrm and continue.

By default, the front door will

be locked when printing. If you

want to change this setting, go to

Setting > Door Lock to change it.

Note

Load filaments

B1 Filament

Please removed the EZ Removable Rubber Magnet with printed object together from the print-

er.And peel off the printed object from the rubber magnet.

Please avoid touch-

ing the led strip of the

printer because the

LED strip will be slight

hot due to long hours

of been light on.

1. Tap Filament Load and Unload on the

main screen.

1. Tap the icon when printing.

da Vinci Color will prompt you to rell material.

4. When the print head has been

warmed up to 220 °C, the feeding motor

will eject the lament.

2. Tap “Unload” and conrm the operation.

2. The screen will show lament status,

please tap "Rell" .

4. The nozzle will be preheated and the

lament will be unloaded automatically.

6. The nozzle will be preheat and notify you when to insert lament into the feed module. 7. The lament will be automatically loaded.

5. When the unloading operation

completes, tap to conrm.

3. Conrm the unloading operation.

3. Conrm the operation.

5. Replace the empty spool with a new one. (please refer to the LOADING section in this manual)

and then tap "PROCEED" .

Function Operation and Instructions

8. Check if lament is extruded from the nozzle, after conrmation, the printer will resume printing.

Unloading filaments

B2 Filament

Refill Material

B3 Filament

P10P10

The da Vinci Color uses four color inks which can be replaced separately.

C. Ink Cartridge Installation

Function Operation and Instructions

1. Prepare several paper towels and the

ink cartridge.

2. Unpack the ink cartridge. 3. Remove the cartridge cover.

Ink Guidance

6. Check if the ink transferred to the

paper towel displays two straight lines.

If so, ink guidance is successfully

completed. Once ink guidance is done,

install the ink cartridge.

4. Press the cartridge head against the

paper towel to transfer some ink onto it.

5. If the ink did not transfer well, try

putting the paper towel on the table and

hold the ink pressed on the paper towel.

7. If the ink did not transfer well, please

wet the paper towel with 75% Alcohol to

wipe the ink. After you clean the inkjet,

check to see if the ink transferred.

Otros manuales para da Vinci Super

Tabla de contenidos

Otros manuales de Impresora 3D de XYZ Printing

XYZ Printing

XYZ Printing Vinvi 2.0A Duo Manual de usuario

XYZ Printing

XYZ Printing da Vinci 2.0 Duo Manual de usuario

XYZ Printing

XYZ Printing da Vinci Jr.1.0w Manual de usuario

XYZ Printing

XYZ Printing da Vinci Jr.1.0 Manual de usuario

XYZ Printing

XYZ Printing da Vinci Jr. 1.0 Manual de usuario

XYZ Printing

XYZ Printing Nobel Superfine Manual de usuario

XYZ Printing

XYZ Printing da Vinci 1.0 Manual de usuario

XYZ Printing

XYZ Printing da Vinci Pro EVO Manual de usuario

XYZ Printing

XYZ Printing 3C10A Manual de usuario

XYZ Printing

XYZ Printing do Vinci nono Manual de usuario

XYZ Printing

XYZ Printing PartPro300 xT Manual de usuario

XYZ Printing

XYZ Printing da Vinci 1.0 Manual de usuario

XYZ Printing

XYZ Printing da Vinci 1.0 Manual de usuario

XYZ Printing

XYZ Printing PartPro150 xP Manual de usuario

XYZ Printing

XYZ Printing PartPro120 xP Manual de usuario

XYZ Printing

XYZ Printing da Vinci 1.1 Plus Manual de usuario

XYZ Printing

XYZ Printing da Vinci 1.0 Pro Manual de usuario

XYZ Printing

XYZ Printing Nobel 1.0 Manual de usuario

XYZ Printing

XYZ Printing ds Vinci Color Manual de usuario

XYZ Printing

XYZ Printing Da Vinci Jr. 2.0 Mix Manual de usuario

XYZ Printing

XYZ Printing da Vinci Jr.1.0 Manual de usuario

XYZ Printing

XYZ Printing da Vinci 1.0 Pro 3in1 Manual de usuario

XYZ Printing

XYZ Printing da Vinci nano Manual de usuario

XYZ Printing

XYZ Printing da Vinci Mini Series Cómo utilizar

Manuales populares de Impresora 3D de otras marcas

Ultimaker

Ultimaker S5 Material Station Manual de usuario

EcubMaker

EcubMaker TOYDIY Manual de usuario

AnyCubic

AnyCubic Kossel Plus Manual de usuario

ReDeTec

ReDeTec ProtoCycler Manual de usuario

Kywoo3D

Kywoo3D Tycoon IDEX Manual de usuario

CraftBot

CraftBot PLUS PRO Manual de usuario

3DGence

3DGence INDUSTRY F340 Manual de usuario

HP Jet Fusion 4200 Instrucciones de funcionamiento

Rokit

Rokit AEP Series Manual de usuario

AnkerMake

AnkerMake M5 Manual de usuario

DIYElectronics

DIYElectronics PRUSA I3 Instrucciones de montaje

Ackuretta

Ackuretta FreeShape 120 Manual de usuario

LONGER

LONGER LK5Pro Manual de usuario

Stratasys

Stratasys J850 Manual de usuario

MakerBot

MakerBot Replicator Manual de usuario

Stratasys

Stratasys FDM Vantage Series Manual de usuario

ZYYX

ZYYX Pro II Manual de usuario

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guía del usuario

XYZ Printing da Vinci Super Manual de usuario

Manuales populares de Impresora 3D de otras marcas