Winmate W10IB3S-PCH2AC-PoE S-Series Manual de usuario

Please read these instructions carefully before using this product, and save this manual for future use

10.1” S-Series HMI

W10IB3S-PCH2AC-PoE

W10IB3S-PCH2-PoE

Quick Start Guide

V1.2

For more information on this and

other Winmate products, please

visit our website at:

www.winmate.com

Document Part Number: 9154111I100A

- 2 -

Contents

1 INTRODUCTION - 7 -

1.1 Features - 7 -

1.2 Package Content - 8 -

1.3 Product Overview - 10 -

2 GETTING STARTED - 11 -

2.1 Turning On Your Device - 11 -

2.2 Operating the HMI Device - 12 -

2.3 Using HF RFID Reader - 15 -

2.4 Using Front Camera - 20 -

2.5 How to Enable Watchdog - 25 -

2.6 Using Recovery Wizard to Restore Computer - 27 -

2.7 Turning off Your Device - 28 -

3 Mounting - 29 -

3.1 Panel Mounting - 29 -

3.2 VESA Mounting - 30 -

3.3 Front Side Wall Mounting - 34 -

3.4 Glass Wall Mounting - 36 -

4 INSTALLATION - 37 -

4.1 Wiring Requirements - 37 -

4.2 Connecting to Other Devices - 38 -

5 SPECIFICATIONS - 41 -

5.1 HMI Device Specifications - 41 -

5.2 HF RFID Reader - 43 -

APPENDIX - 44 -

Appendix A: Cleaning the Monitor - 44 -

Appendix B: Winmate Software Development Kit - 45 -

- 3 -

FCC Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received

including interference that may cause undesired

operation.

This equipment has been tested and found to comply with the limits for a

class "B" digital device, pursuant to part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at him own expense.

European Union

Electromagnetic Compatibility Directive (2014/30/EU)

EN55024: 2010/ A1: 2015

oIEC61000-4-2: 2009

oIEC61000-4-3: 2006+A1: 2007+A2: 2010

oIEC61000-4-4: 2012

oIEC61000-4-5: 2014

oIEC61000-4-6: 2014

oIEC61000-4-8: 2010

oIEC61000-4-11: 2004

EN55032: 2012/AC:2013

EN61000-3-2:2014

EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

EN 60950-1:2006/A11:2009/A1:2010/A12:2011/

A2:2013

This equipment is in conformity with the requirement of the following EU

legislations and harmonized standards. Product also complies with the

Council directions.

- 4 -

No part of this document may be reproduced, copied, translated, or transmitted in

any form or by any means, electronic or mechanical, for any purpose, without the

prior written permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their

respective owners.

Disclaimer

Winmate Inc. reserve the right to make changes, without notice, to any product,

including circuits and/or software described or contained in this manual in order

to improve design and/or performance. We assume no responsibility or liability for

the use of the described product(s) conveys no license or title under any patent,

or warranties that these products are free from patent, copyright, or mask work

right infringement, unless otherwise specified. Applications that are described in

this manual are for illustration purposes only. We make no representation or

guarantee that such application will be suitable for the specified use without

further testing or modification.

Warranty

Winmate Inc. warranty guarantees that each of its products will be free from

material and workmanship defects for a period of one year from the invoice date.

If the customer discovers a defect, we will, at his/her option, repair or replace the

defective product at no charge to the customer, provide it is returned during the

warranty period of one year, with transportation charges prepaid. The returned

product must be properly packaged in its original packaging to obtain warranty

service. If the serial number and the product shipping data differ by over 30 days,

the in-warranty service will be made according to the shipping date. In the serial

numbers the third and fourth two digits give the year of manufacture, and the fifth

digit means the month (e. g., with A for October, B for November and C for

December).

For example, the serial number 1W16Axxxxxxxx means October of year 2016.

Customer Service

We provide a service guide for any problem by the following steps: First, visit the

website of our distributor to find the update information about the product.

Second, contact with your distributor, sales representative, or our customer

service center for technical support if you need additional assistance.

You may need the following information ready before you call:

Product serial number

Software (OS, version, application software, etc.)

Description of complete problem

The exact wording of any error messages

In addition, free technical support is available from our engineers every business

day. We are always ready to give advice on application requirements or specific

information on the installation and operation of any of our products.

- 5 -

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your chassis

whenever you work with the hardware. Do not make connections

while the power is on. Sensitive electronic components can be

damaged by sudden power surges. Only experienced electronics

personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque

vous travaillez sur celui-ci. Ne pas brancher de connections

lorsque l’alimentation est présente. Des composantes

électroniques sensibles peuvent être endommagées par des sauts

d’alimentation. Seulement du personnel expérimenté devrait ouvrir

ces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge before

touching the CPU card. Modern electronic devices are very

sensitive to static electric charges. As a safety precaution, use a

grounding wrist strap at all times. Place all electronic components

in a static-dissipative surface or static-shielded bag when they are

not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge

statique avant de toucher la carte CPU. Les équipements

électroniques moderns sont très sensibles aux décharges

d’électricité statique. Toujours utiliser un bracelet de mise à la

terre comme précaution. Placer toutes les composantes

électroniques sur une surface conçue pour dissiper les charge, ou

dans un sac anti-statique lorsqu’elles ne sont pas dans le chassis.

- 7 -

1 INTRODUCTION

Congratulations on purchasing Winmate® 10.1” S-Series HMI.

Interactive and smart automation systems of intelligent buildings are

in a fast growing phase. Winmate multi-touch S-Series HMI is suitable

for home automation and room management systems. Flat surface is

easy-to-clean and delivers aesthetically pleasing look for any interior.

By connecting to centralized database, it can provide real time update

for booking status and available schedule, or perform as a

synchronous display in meetings.

S-Series HMI run on Intel® Celeron® N2930 processor and support

Windows 10 IoT, Windows Embedded 8.1 Industry Pro, Windows

Embedded 8Standard, Windows 7 Pro for Embedded Systems, and

Windows Embedded Standard 7–WS7P. For easy, quick and cost

effective network installations both models support PoE. These

models sealed with front IP 65 dust and water proof, and IP22 on the

back side. Optional HF RFID 13.56 MHz is useful for access control.

S-Series HMI has an exceptional feature - LED light bar. With the

help of red, green, blue and orange LED indicators you can see the

status of the machine or processes afar. It significantly reduces power

consumption by keeping the display turned off.

1.1 Features

Winmate® 10.1” S-Series HMI features:

10.1'' 1280 x 800 with Projected Capacitive Multi-Touch

Intel® Celeron® N2930 1.83GHz

PoE standard IEEE 802.3at (25 W)

Fanless cooling system and ultra-low power consumption

Dual Gigabit Ethernet

Front IP65 water and dust proof

RGB LED Status Light Bar indicators on both sides

Optional HF RFID Reader

Optional 2MP Front Camera

Stylish design for room booking, access control and room

information applications

- 8 -

1.2 Package Content

Carefully remove the box and unpack your device. Please check if all

the items listed below are inside your package. If any of these items

are missing or damaged contact us immediately.

Standard factory shipment list:

10.1” HMI Device

Quick Start Guide

(Hardcopy)

Driver CD & User

Manual

Varies by product

specifications

9154111I100A

IB32:

9171111I103M

AC Adapter

(12V/ 50W)

Power Cable

Terminal Block 3

922D050W12VA

Varies by country

94J602G030K0

VESA Mounting

Screws

82111E240400

- 9 -

Package may include optional accessories based on your order:

VESA Desk Stand

PCVS-V1

VESA Desk Stand

LA-100

VESA Wall Mount

Bracket

LA-106

99KK00A0000E

9B0000000128

9B0000000412

Front Side

Wall Mount Kit

PCFW-V1

Glass Wall Mount

Kit

Right: PCGM-V2L

Left: PCGM-V2L

99KK00A0000C

Right:

99KN00A00010

Left: 99KN00A00011

- 10 -

1.3 Product Overview

Unit: mm

Dimensions (W x L x H): 263.28 x 172 x 35.7 mm

*Digital I/O is an optional connector and may not be present in your

model.

** Power Device (PD): IEEE 802.3at (25 W)

***RGB LED Status Light Bar only available for the model number

W10IB3S-PCH2AC-PoE.

№

Description

№

Description

󰪦

Digital I/O (Optional)*

󰪫

RJ-45 (LAN/ PoE)**

󰪧

RJ-45 (LAN)

󰪬

2MP Front Camera (Optional)

󰪨

USB 2.0, USB 3.0

󰪭

HF RFID Reader (Optional)

󰪩

RS232/422/485

󰪮

LED Status Light Bar***

(Only for W10IB3S-PCH2AC-

PoE)

󰪪

12V DC Terminal Block

(Phoenix Type)

󰪯

1 Watt Speaker

Otros manuales para W10IB3S-PCH2AC-PoE S-Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Panel táctil de Winmate

Winmate

Winmate W10RK3S-PCH2LB Manual de usuario

Winmate

Winmate W10IB3S-EHH2 Manual de usuario

Winmate

Winmate R17IH3S-MLA1-89 Manual de usuario

Winmate

Winmate R15IB3S-65EX Manual de usuario

Winmate

Winmate R10IB3S-SPT269 Manual de usuario

Winmate

Winmate W07FA3S-GSM1 Manual de usuario

Winmate

Winmate W10IE3S-MRH2FP Manual de usuario

Winmate

Winmate ATEX R19IHAT-66EX-T Manual de usuario

Winmate

Winmate R15IE3S-PTC3 Manual de usuario

Winmate

Winmate W22IK3S-SPA369 Manual de usuario

Winmate

Winmate W07FA3S-GSO1 Manual de usuario

Winmate

Winmate R15IK3S-SPC3 Manual de usuario

Winmate

Winmate R15IW3S-SPC3 Manual de usuario

Winmate

Winmate W10IB3S-PCH2AC-PoE S-Series Manual de usuario

Winmate

Winmate GC Series Manual de usuario

Winmate

Winmate W27FA3S-CHC1 Manual de usuario

Winmate

Winmate IP69K Stainless P-Cap Manual de usuario

Winmate

Winmate R10IB3S-67T2 Manual de usuario

Winmate

Winmate R10IBWS-MHP1 Manual de usuario

Winmate

Winmate R05FA3S-OFD1HMHB Manual de usuario

Winmate

Winmate G-WIN Slim IP65 Manual de usuario

Winmate

Winmate R15IW3S-65C3 Manual de usuario

Winmate

Winmate T5-series Manual de usuario

Winmate

Winmate R15IH3S-MRA3FP Manual de usuario

Manuales populares de Panel táctil de otras marcas

FlowLine

FlowLine Data loop Manual de usuario

ALPEX

ALPEX AEx-8 P Series Manual de usuario

Ltech

Ltech E5S Manual de usuario

Harman

Harman AMX MODERO S MSD-701-L2 Manual de usuario

Acnodes

Acnodes PC 1150 Manual de usuario

AIS

AIS IP10IA99 series Manual de usuario

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manual de usuario

YASKAWA

YASKAWA TP 610C Manual de usuario

B&R

B&R Power Panel C Series Manual de usuario

Beijer Electronics

Beijer Electronics X2 control Manual de usuario

AXIOMTEK

AXIOMTEK GOT321W-521 Manual de usuario

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manual de usuario

Qomo

Qomo QIT1386 Manual de usuario

DFI

DFI KS104-CD Manual de usuario

AMX

AMX AXP-PPC Guía

Sartorius

Sartorius X3 PR 5410 Manual de usuario

AMX

AMX Modero X Series Manual de usuario

Advantech

Advantech TPC-30 Series Manual de usuario