Winmate R10IBWS-MHP1 Manual de usuario

M-Series HMI

10.4”/12”P-cap touchscreen, with

Intel ®Celeron Bay Trail-M N2930 1.83 GHz

Multifunctional Design

Model No.:

R10IBWS-MHP1

R12IBWS-MHM2

User Manual

Version 1.0

Manual Part Number: 9152111I100Q

User Manual

Preface

No part of this document may be reproduced, copied, translated, or transmitted in any form

or by any means, electronic or mechanical, for any purpose, without the prior written

permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including circuits

and/or software described or contained in this manual in order to improve design and/or

performance. We assume no responsibility or liability for the use of the described product(s)

conveys no license or title under any patent, copyright, or masks work rights to these

products, and make no representations or warranties that these products are free from

patent, copyright, or mask work right infringement, unless otherwise specified. Applications

that are described in this manual are for illustration purposes only. We make no

representation or guarantee that such application will be suitable for the specified use

without further testing or modification.

Warranty

Our warranty guarantees that each of its products will be free from material and

workmanship defects for a period of one year from the invoice date. If the customer discovers

a defect, we will, at his/her option, repair or replace the defective product at no charge to the

customer, provide it is returned during the warranty period of one year, with transportation

charges prepaid. The returned product must be properly packaged in its original packaging to

obtain warranty service. If the serial number and the product shipping data differ by over 30

days, the in-warranty service will be made according to the shipping date. In the serial

numbers the third and fourth two digits give the year of manufacture, and the fifth digit

means the month (e. g., with A for October, B for November and C for December).

For example, the serial number 1W14Axxxxxxxx means October of year 2014.

Customer Service

We provide a service guide for any problem by the following steps: First, visit the website of

our distributor to find the update information about the product. Second, contact with your

distributor, sales representative, or our customer service center for technical support if you

need additional assistance.

User Manual

iii

You may need the following information ready before you call:

Product serial number

Software (OS, version, application software, etc.)

Description of complete problem

The exact wording of any error messages

In addition, free technical support is available from our engineers every business day. We are

always ready to give advice on application requirements or specific information on the

installation and operation of any of our products.

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information or to

alert you to the potential for hardware damage or personal injury. These are Notes, Important,

Cautions, and Warnings. The following is an example of each type of advisory.

NOTE:

A note is used to emphasize helpful information

IMPORTANT:

An important note indicates information that is important for you to know.

CAUTION/ ATTENTION

A Caution alert indicates potential damage to hardware and explains how to avoid the

potential problem.

Une alerte d’attention indique un dommage possible à l’équipement et explique

comment éviter le problème potentiel.

WARNING!/ AVERTISSEMENT!

An Electrical Shock Warning indicates the potential harm from electrical hazards and

how to avoid the potential problem.

Un Avertissement de Choc Électrique indique le potentiel de chocs sur des

emplacements électriques et comment éviter ces problèmes.

User Manual

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your chassis whenever

you work with the hardware. Do not make connections while the power is on.

Sensitive electronic components can be damaged by sudden power surges.

Only experienced electronics personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque vous

travaillez sur celui-ci. Ne pas brancher de connections lorsque l’alimentation

est présente. Des composantes électroniques sensibles peuvent être

endommagées par des sauts d’alimentation. Seulement du personnel

expérimenté devrait ouvrir ces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge before touching the CPU

card. Modern electronic devices are very sensitive to static electric charges. As

a safety precaution, use a grounding wrist strap at all times. Place all electronic

components in a static-dissipative surface or static-shielded bag when they are

not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge statique

avant de toucher la carte CPU. Les équipements électroniques moderns sont

très sensibles aux décharges d’électricité statique. Toujours utiliser un

bracelet de mise à la terre comme précaution. Placer toutes les composantes

électroniques sur une surface conçue pour dissiper les charge, ou dans un sac

anti-statique lorsqu’elles ne sont pas dans le chassis.

Safety Precautions

For your safety carefully read all the safety instructions before using the device. Keep this

user manual for future reference.

Always disconnect this equipment from any AC outlet before cleaning. Do not use

liquid or spray detergents for cleaning. Use a damp cloth.

For pluggable equipment, the power outlet must be installed near the equipment

ALTERNATING CURRENT / MISE À LE TERRE!

The Protective Conductor Terminal (Earth Ground) symbol indicates the

potential risk of serious electrical shock due to improper grounding.

Le symbole de Mise à Terre indique le risqué potential de choc électrique grave à

la terre incorrecte.

User Manual

and must be easily accessible.

Keep this equipment away from humidity.

Put this equipment on a reliable surface during installation. Dropping it or letting it

fall could cause damage.

The openings on the enclosure are for air convection and to protect the equipment

from overheating.

CAUTION/ATTENTION

Do not cover the openings!

Ne pas couvrir les ouvertures!

Before connecting the equipment to the power outlet make sure the voltage of the

power source is correct.

Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

If the equipment is not used for a long time, disconnect it from the power source to

avoid damage by transient over-voltage.

Never pour any liquid into an opening. This could cause fire or electrical shock.

Never open the equipment. For safety reasons, only qualified service personnel

should open the equipment.

All cautions and warnings on the equipment should be noted.

*Let service personnel to check the equipment in case any of the following problems

appear:

oThe power cord or plug is damaged.

oLiquid has penetrated into the equipment.

oThe equipment has been exposed to moisture.

oThe equipment does not work well or you cannot get it to work according

to the user manual.

oThe equipment has been dropped and damaged.

oThe equipment has obvious signs of breakage.

Do not leave this equipment in an uncontrolled environment where the storage

temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the

equipment.

CAUTION/ATTENTION

Use the recommended mounting apparatus to avoid risk of injury.

Utiliser l’appareil de fixation recommandé pour éliminer le risque de

blessure.

User Manual

WARNING! / AVERTISSEMENT!

Only use the connection cords that come with the product. When in

doubt, please contact the manufacturer.

Utiliser seulement les cordons d’alimentation fournis avec le produit.

Si vous doutez de leur provenance, contactez le manufacturier.

WARNING!/ AVERTISSEMENT!

Always ground yourself against electrostatic damage to the device.

Toujours vérifier votre mise à la terre afin que l’équipement ne se

décharge pas sur vous.

Cover workstations with approved anti-static material. Use a wrist strap

connected to a work surface and properly grounded tools and equipment.

Use anti-static mats, heel straps, or air ionizer for added protection.

Handle electrostatic-sensitive components, PCB’s and assemblies by the case or

the edge of the board.

Avoid contact with pins, leads, or circuitry.

Turn off power and input signals before inserting and removing connectors or test

equipment.

Keep the work area free of non-conductive materials, such as ordinary plastic

assembly aids and Styrofoam.

Use filed service tools, such as cutters, screwdrivers, and vacuum cleaners that

are conductive.

Always put drivers and PCB’s component side on anti-static foam.

User Manual

vii

Important Information

Countries/ Area

Symbol

This equipment complies with essential requirements of:

European Union

Electromagnetic Compatibility Directive(2014/30/EU)

Low Voltage Directive (2014/35/EU)

Restrictions of the use of certain hazardous substances

(RoHS) Directive (2011/65/EU)

USA

FCC Part 15 Subpart B Regulations Class B

Federal Communications Commission Radio Frequency Interface Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class "B" digital

device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference

at him own expense.

Refer to Certificates for the original document.

User Manual

viii

EC Declaration of Conformity

[English]

The object of the declaration described above [A] is in conformity with the requirement of the

following EU legislations [B] and harmonized standards [C].

Product also complies with the Council directions [D].

[German]

Das oben beschriebene Objekt [A] entspricht den Anforderungen der nachfolgend aufgeführten

EU-Vorgben [B] und den harmonisierten Normen [C]. Das Produkt entspricht außerdem den EU-

Direktiven [D].

[French]

L'objet de la déclaration décrite ci-dessus [A] est conformité aux conditions stipulées dans les

législations de l’Union européenne énoncées ci-après [B] et aux normes harmonisées [C]. Ce produit

est également conforme aux directives du Conseil européen [D].

[Other languages]

Other languages are available upon request.

Refer to Certificates for the original document.

Revision History

Version

Date

Note

Author

1.0

15-March-2016

Initial release

Raven Hsu, edited by Anna

Kiseleva

User Manual

Contents

Preface ........................................................................................................................................ii

1 Introduction............................................................................................................................13

1.1 Product Features................................................................................................................13

1.2 Hardware Specifications .................................................................................................... 14

1.3 Software Support...............................................................................................................15

1.4 Packing List......................................................................................................................... 15

1.5 Appearance ........................................................................................................................16

1.6 Dimensions.........................................................................................................................17

10.4” Dimensions ............................................................................................................. 17

12.1” Dimensions ............................................................................................................. 18

2 Getting Started........................................................................................................................20

2.1 Powering On....................................................................................................................... 20

2.1.1 AC Adapter Components......................................................................................... 20

2.1.2 Power Considerations ............................................................................................. 21

2.1.3 Connecting the Power ............................................................................................. 22

2.2 Connector Pinouts ............................................................................................................. 23

2.2.1 DC-in (9~36V) Isolated Connector........................................................................... 23

2.2.2 COM Serial Port Connector .....................................................................................23

2.2.3 Two USB: USB 2.0 / USB 3.0 Connectors................................................................. 23

2.2.4 HDMI Connector...................................................................................................... 24

2.2.5 LAN (RJ45) Connector.............................................................................................. 24

2.3 Turning On .........................................................................................................................24

2.4 Configuring Serial Port COM1............................................................................................24

2.5 Adjusting the LCD Display Brightness ................................................................................ 26

2.6 Turning Off .........................................................................................................................26

3 Operating the HMI Device .......................................................................................................28

3.1 Multi-Touch........................................................................................................................ 28

3.2 Operating System............................................................................................................... 29

4 Driver Installation ...................................................................................................................31

4.1 Installing Chipset Driver.....................................................................................................31

User Manual

4.2 Installing Graphics Driver................................................................................................... 34

4.3 Installing Intel Sideband Fabric Device (Intel MBI) Driver (Windows 8)...........................35

4.4 Installing Intel Trusted Engine Interface (Intel TXE) Driver ...............................................36

4.5 Installing Intel Network Connections.................................................................................37

4.6 Installing Audio Driver........................................................................................................ 38

4.7 Installing USB 3.0 Driver (Windows 7) ............................................................................... 39

5 BIOS Setup .............................................................................................................................. 41

5.1 When and How to Use BIOS Setup ....................................................................................41

5.2 BIOS Functions ................................................................................................................... 41

5.2.1 Main Menu ..............................................................................................................42

5.2.2 Advanced Menu ...................................................................................................... 43

5.2.3 Chipset Menu .......................................................................................................... 60

5.2.4 Security Menu .........................................................................................................61

5.2.5 Boot Configuration ..................................................................................................62

5.2.6 Save & Exit...............................................................................................................64

5.3 Using Recovery Wizard to Restore Computer ................................................................... 65

6 Mounting Solutions................................................................................................................. 68

6.1 Cable Mounting Considerations ........................................................................................ 68

6.2 Safety Precautions ............................................................................................................. 68

6.3 Mounting Guide .................................................................................................................69

6.3.1 VESA Mount.............................................................................................................69

6.3.2 Flush Mount / Panel Mount ....................................................................................70

7 Technical Support Documents ................................................................................................. 72

7.1 Software Developer Support .............................................................................................72

7.1.1 Watchdog SDK.........................................................................................................72

7.2 Problem Report Form ........................................................................................................73

8 Certificates..............................................................................................................................75

8.1 FCC Declaration of Conformity .......................................................................................... 75

8.1.1 R10IBWS-MHP1.......................................................................................................75

8.1.2 R12IBWS-MHM2......................................................................................................76

8.2 EC Declaration of Conformity ............................................................................................77

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Panel táctil de Winmate

Winmate

Winmate R10FA3S-GST2 Manual de usuario

Winmate

Winmate T5-series Manual de usuario

Winmate

Winmate R19IB7T-GCM1 Manual de usuario

Winmate

Winmate G-WIN GC Series Manual de usuario

Winmate

Winmate W04FA3S-EHT1 Manual de usuario

Winmate

Winmate R10L100-PCT2-PoE Manual de usuario

Winmate

Winmate R15IH3S-MRA3FP Manual de usuario

Winmate

Winmate R15ID3S-65EX Manual de usuario

Winmate

Winmate R15IW3S-65C3 Manual de usuario

Winmate

Winmate W10IB3S-EHH2 Manual de usuario

Winmate

Winmate Military Series Manual de usuario

Winmate

Winmate W07FA3S-PCM1AC-PoE Manual de usuario

Winmate

Winmate W10IB3S-PCH2AC-PoE S-Series Manual de usuario

Winmate

Winmate W07FA3S-GSO1 Manual de usuario

Winmate

Winmate R15ID3S-65A1FTE Manual de usuario

Winmate

Winmate 7'' S-Series Manual de usuario

Winmate

Winmate W27FA3S-CHC1 Manual de usuario

Winmate

Winmate P-CAP SERIES Manual de usuario

Winmate

Winmate W10IB3S-PCH2-PoE S-Series Manual de usuario

Winmate

Winmate B Series Manual de usuario

Winmate

Winmate R15IB3S-PCC3-PoE Manual de usuario

Winmate

Winmate W10IE3S-MRH2FP Manual de usuario

Winmate

Winmate R15IB7T-POC3 Manual de usuario

Winmate

Winmate R17IH3S-MLA1-89 Manual de usuario

Manuales populares de Panel táctil de otras marcas

FlowLine

FlowLine Data loop Manual de usuario

ALPEX

ALPEX AEx-8 P Series Manual de usuario

Ltech

Ltech E5S Manual de usuario

Harman

Harman AMX MODERO S MSD-701-L2 Manual de usuario

Acnodes

Acnodes PC 1150 Manual de usuario

AIS

AIS IP10IA99 series Manual de usuario

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manual de usuario

YASKAWA

YASKAWA TP 610C Manual de usuario

B&R

B&R Power Panel C Series Manual de usuario

Beijer Electronics

Beijer Electronics X2 control Manual de usuario

AXIOMTEK

AXIOMTEK GOT321W-521 Manual de usuario

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manual de usuario

Qomo

Qomo QIT1386 Manual de usuario

DFI

DFI KS104-CD Manual de usuario

AMX

AMX AXP-PPC Guía

Sartorius

Sartorius X3 PR 5410 Manual de usuario

AMX

AMX Modero X Series Manual de usuario

Advantech

Advantech TPC-30 Series Manual de usuario