Winmate T5-series Manual de usuario
T5-series Panel PC
Intel Core Duo Mini-ITX SBC, Low
Power, High Performance Design with
Intel Platform, TFT LCD and
10/100/1000 base-T Ethernet.
User Guide Version 1.2
FCC Statement
This device complies with part 15 FCC rules. Operation is subject to
the following two conditions：
zThis device may not cause harmful interference.
zThis device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class "a"
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at him
own expense.
T5 series Panel PC User Guide
II
T5 series Panel PC User Guide
III
Copyright Notice
Copyright © 2007 Winmate Technology Inc., ALL RIGHTS RESERVED. No part of
this document may be reproduced, copied, translated, or transmitted in any form or by
any means, electronic or mechanical, for any purpose, without the prior written
permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective
owners.
Disclaimer
Winmate Communication Inc. reserves the right to make changes, without notice, to
any product, including circuits and/or software described or contained in this manual
in order to improve design and/or performance. Winmate Communication assumes no
responsibility or liability for the use of the described product(s), conveys no license or
title under any patent, copyright, or masks work rights to these products, and makes
no representations or warranties that these products are free from patent, copyright, or
mask work right infringement, unless otherwise specified. Applications that are
described in this manual are for illustration purposes only. Winmate Communication
Inc. makes no representation or warranty that such application will be suitable for the
specified use without further testing or modification.
Warranty
Winmate warrants that each of its products will be free from material and
workmanship defects for a period of one year from the invoice date. If the customer
discovers a defect, Winmate will, at its option, repair or replace the defective product
at no charge to the customer, provided it is returned during the warranty period of one
year, with transportation charges prepaid. The returned product must be properly
packaged in it’s original packaging to obtain warranty service.
If the serial number and the product shipping data differ by over 30 days, the
in-warranty service will be made according to the shipping date. In the serial numbers
the third and fourth two digits give the year of manufacture, and the fifth digit means
the month (e. g., with A for October, B for November and C for December).
For example, the serial number 1W07Axxxxxxxx means October of year 2007.
T5 series Panel PC User Guide
IV
Check List
Before using this Panel PC, please make sure that all the items listed below
are present in your package
¾1 x T5 series Panel PC
¾1 x T5 series Panel PC User Guide
¾1 x I370 SBC User Manual
¾1 x Power adapter
¾1 x Power cord
¾1 x Keyboard
¾1 x Mouse
¾1 x CD-ROM disc with Driver Utility and User's Manual
¾1 x Touch Driver CD (Optional)
¾Mounting of screws (Option)
Make sure that all of the items listed above are present. Do not attempt to
apply power to the system if there is damage to any of its components.
Customer Service
We provide service guide for any problem as follow steps：First, visit the website at
http://www.winmate.com to find the update information about the product. Second,
contact with your distributor, sales representative, or our customer service center for
technical support if you need additional assistance. You may have the following
information ready before you call：
¾Product serial number
¾Peripheral attachments
¾Software (OS, version, application software, etc.)
¾Description of complete problem
¾The exact wording of any error messages
In addition, free technical support is available from our engineers every business day.
We are always ready to give advice on application requirements or specific
information on the installation and operation of any of our products. Please do not
hesitate to call or e-mail us.
Notice
1. Do not touch the LCD panel surface with sharp or hard objects.
2. Do not use abrasive cleaners, waxes or solvents for cleaning, use only a dry
or damp, soft cloth.
3. Use only with a high quality, safety-approved, AC/DC power adapter.
V
Safety Precautions
Warning!
Always completely disconnect the power cord from your chassis
whenever you work with the hardware. Do not make connections
while the power is on. Sensitive electronic components can be
damaged by sudden power surges. Only experienced electronics
personnel should open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution, use a
grounding wrist strap at all times. Place all electronic components
in a static-dissipative surface or static-shielded bag when they are
not in the chassis.
T5 series Panel PC User Guide
T5 series Panel PC User Guide
VI
Safety and Warranty
1. Please read these safety instructions carefully.
2. Please keep this user's manual for later reference.
3. Please disconnect this equipment from any AC outlet before cleaning. Do not use
liquid or spray detergents for cleaning. Use a damp cloth.
4. For pluggable equipment, the power outlet must be installed near the equipment
and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting
it fall could cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment from
overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient over-voltage.
12. Never pour any liquid into an opening. This could cause fire or electrical shock.
13. Never open the equipment. For safety reasons, only qualified service personnel
should open the equipment.
14. If any of the following situations arises, get the equipment checked by service
personnel:
A. The power cord or plug is damaged.
B. Liquid has penetrated into the equipment.
C. The equipment has been exposed to moisture.
D. The equipment does not work well, or you cannot get it to work according to
the user’s manual.
E. The equipment has been dropped and damaged.
F. The equipment has obvious signs of breakage.
15. Do not leave this equipment in an uncontrolled environment where the storage
temperature is below -20° C (-4°F) or above 60° C (140° F). It may damage the
equipment.
T5 series Panel PC User Guide
VII
Revision History
Version Date Note Author
0.1 2007.09.11 9First Version Aladin Huang
1.1 2007.09.20 9Double Check Aladin Huang
1.2 2007.10.02 9H/W Double Check Kevin Chen
Contents
CHAPTER 1 GENERAL INFORMATION.........................................................................................1
1-1 Introduction .....................................................................................................1
1-2 I370 SBC and T5 series Panel PC System Specifications...............................2
1-3 LCD Selection Guide.......................................................................................3
CHAPTER 2 GETTING STARTED.....................................................................................................4
2-1 Input / Output Devices.....................................................................................4
2-2 Starting the Panel PC& O/S Installation..........................................................5
2-3 Driver Installation............................................................................................5
CHAPTER 3 TOUCH DRIVER INSTALLATION.............................................................................6
3-1 Introduction .....................................................................................................6
3-2 The ELOAccuTouch Driver Installation.........................................................7
3-2-1 Configuration Utility............................................................................8
3-3 The Premier Touch Driver Installation..........................................................10
3-3-1 Configuration Utility..........................................................................11
CHAPTER 4 T5 SERIES PANEL PC MOUNTING GUIDE...........................................................13
4-1 Open Frame Panel PC: ..................................................................................13
4-2 5mm Panel Mount Panel PC:.........................................................................15
4-3 10mm IP65 Panel PC.....................................................................................17
4-4 Chassis Panel PC...........................................................................................19
KNOWN ISSUES.................................................................................................................................20
NOTICES..............................................................................................................................................21
Chapter 1 GENERAL INFORMATION
1-1 Introduction
The T5 series Panel PC is high performance, low power PC with Intel 945
GME chipset combine with a TFT LCD Panel. The Intel Core Duo high
performance Processor delivers the most performance per watt available in
the market. The Panel PC is designed to satisfy most of the applications in the
industrial market, such as POS, KIOSK, Industrial Automation, HMI and
Programmable Control System. It’s a PC-based system with DDR2 SDRAM,
VGA/LCD controller, four COM ports, and on-board 10/100/1000 Mpbs Base-T
Ethernet. The Panel PC supports one Mini-PCI expansion slot for Wireless,
Ethernet, COM port, VGA solutions. It is a compact design to meet the
demanding performance requirements of today’s business and industrial
applications.
T5 series Panel PC User Guide
1
T5 series Panel PC User Guide
2
1-2 I370 SBC and T5 series Panel PC System Specifications
Form Factor Mini-ITX
CPU Intel Core2 Duo, Core Duo, Core Solo, Celeron M
ULV Processor
Chipset Intel Socket M
Memory 2 x DDR2 DIMM socket, supports up to 4GB DDR2
533/667 SDRAM (240 pins)
BIOS Award 4Mbit
VGA Controller Intel® GMA 950 Integrated Graphics Engine
VGA Memory Up to 224MB shared with system memory
LCD Support Intel® GMA 950 Integrated Graphics Engine built-in,
single- or dual-channel panel support up to 1600 x
1200, 18bit
Ethernet 2 x Giga LAN (Dual Realtek RTL8111B Controller )
Audio Realtek ALC655 5.1 channel (Line-out, Line-in &
Mic in)
IDE One channels; supports Ultra DMA33/66/100
Serial 4 x RS-232(3x Rear I/O, 1 x pin-header)
USB 8 x USB (4 x Rear I/O, 4 x pin-header)
Expansion Slots 1 x Mini PCI (Optional)
Power Adapter DC-in 4 Pin 12V Power input
HDD 40GB (Default for 8.4” ~ 12.1”)
80GB (Default for 15” above)
O/S(Optional) Windows XP Embedded / Windows XP Professional
/ WinCE5.0 / Linux
Tabla de contenidos
Otros manuales de Panel táctil de Winmate
Winmate
Winmate R15IK3S-SPC3 Manual de usuario
Winmate
Winmate W27FA3S-CHC1 Manual de usuario
Winmate
Winmate GC Series Manual de usuario
Winmate
Winmate W07IB3S-GCM1(HB) Manual de usuario
Winmate
Winmate W19IB3S-CHA1 Manual de usuario
Winmate
Winmate PT Series Manual de usuario
Winmate
Winmate PT Series Manual de usuario
Winmate
Winmate R15IB3S-PCC3-PoE Manual de usuario
Winmate
Winmate ATEX R19IHAT-66EX-T Manual de usuario
Winmate
Winmate R10IB3S-67T2 Manual de usuario
Winmate
Winmate R17IB3S-RKA1ML Manual de usuario
Winmate
Winmate W07IB3S-EHT1 Manual de usuario
Winmate
Winmate G-WIN GC Series Manual de usuario
Winmate
Winmate R10IBWS-MHP1 Manual de usuario
Winmate
Winmate W04FA3S-EHT1 Manual de usuario
Winmate
Winmate R10IB3S-SPT2 Manual de usuario
Winmate
Winmate R17IH3S-MLA1-89 Manual de usuario
Winmate
Winmate G-WIN AMD Rugged Series Manual de usuario
Winmate
Winmate B Series Manual de usuario
Winmate
Winmate W07L100-GCO1 Manual de usuario
Manuales populares de Panel táctil de otras marcas
IBASE Technology
IBASE Technology ASTUT-152-RE1S Manual de usuario
YASKAWA
YASKAWA TP 610C Manual de usuario
B&R
B&R Power Panel C Series Manual de usuario
Beijer Electronics
Beijer Electronics X2 control Manual de usuario
AXIOMTEK
AXIOMTEK GOT321W-521 Manual de usuario
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Manual de usuario
