Winmate W10RK3S-PCH2LB Manual de usuario

Please read these instructions carefully before using this product, and save this manual for future use.

7”/ 10.1”/ 15”

S Series HMI

Arm Cortex® A72 + Quad-core Cortex®-A53

Android 7.1

Model No.

W07RK3S-PCO1-POE

W07RK3S-PCO1AC-POE

W10RK3S-PCH2-POE

W10RK3S-PCH2AC-POE

W10RK3S-PCH2LB

R15RK3S-PCC3-POE

Quick Start Guide

Document Version 1.3

Document Part No. 915211101045

2 7”/ 10.1”/ 15” S Series HMI Quick Start Guide

Contents

PREFACE 3

CHAPTER 1: INTRODUCTION 7

1.1 INTRODUCTION 8

1.2 PRODUCT FEATURES 8

1.3 UNPACKING 9

1.4 MECHANICAL DIMENSIONS 10

1.5 CONNECTOR DESCRIPTION 14

CHAPTER 2: GETTING STARTED 15

2.1 POWERING ON16

2.2 CONNECTOR DESCRIPTION 18

2.3 CONFIGURING SERIAL PORT SETTING 21

CHAPTER 3: MOUNTING 23

3.1 CABLE MOUNTING CONSIDERATIONS 24

3.2 SAFETY PRECAUTIONS 24

3.3 MOUNTING GUIDE 24

CHAPTER 4: OPERATING THE DEVICE 32

4.1 HOME SCREEN 33

4.2 QUICK SETTINGS 34

4.3 ETHERNET 34

4.4 WINMATE®HOME MANAGER (WHM) 37

APPENDIX 42

APPENDIX A: PRODUCT SPECIFICATIONS 42

APPENDIX B: HF RFID READER SPECIFICATIONS 43

Preface

No part of this document may be reproduced, copied, translated, or transmitted in any form or

by any means, electronic or mechanical, for any purpose, without the prior written permission

of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including circuits and/or

software described or contained in this manual in order to improve design and/or performance.

We assume no responsibility or liability for the use of the described product(s) conveys no

license or title under any patent, copyright, or masks work rights to these products, and make

no representations or warranties that these products are free from patent, copyright, or mask

work right infringement, unless otherwise specified. Applications that are described in this

manual are for illustration purposes only. We make no representation or guarantee that such

application will be suitable for the specified use without further testing or modification.

Warranty

Our warranty guarantees that each of its products will be free from material and workmanship

defects for a period of one year from the invoice date. If the customer discovers a defect, we

will, at his/her option, repair or replace the defective product at no charge to the customer,

provide it is returned during the warranty period of one year, with transportation charges

prepaid. The returned product must be properly packaged in its original packaging to obtain

warranty service. If the serial number and the product shipping data differ by over 30 days, the

in-warranty service will be made according to the shipping date. In the serial numbers the third

and fourth two digits give the year of manufacture, and the fifth digit means the month (e. g.,

with A for October, B for November and C for December).

For example, the serial number 1W18Axxxxxxxx means October of year 2018.

Customer Service

We provide a service guide for any problem by the following steps: First, visit the website of

our distributor to find the update information about the product. Second, contact with your

distributor, sales representative, or our customer service center for technical support if you

need additional assistance.

You may need the following information ready before you call:

•Product serial number

•Software (OS, version, application software, etc.)

•Description of complete problem

•The exact wording of any error messages

In addition, free technical support is available from our engineers every business day. We are

always ready to give advice on application requirements or specific information on the

installation and operation of any of our products.

4 7”/ 10.1”/ 15” S Series HMI Quick Start Guide

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information or to

alert you to the potential for hardware damage or personal injury. These are Notes, Important,

Cautions, and Warnings. The following is an example of each type of advisory.

Note:

A note is used to emphasize helpful information

Important:

An important note indicates information that is important for you to know.

Caution/ Attention

A Caution alert indicates potential damage to hardware and explains how to avoid

the potential problem.

Une alerte d’attention indique un dommage possible à l’équipement et explique

comment éviter le problème potentiel.

Warning!/ Avertissement!

An Electrical Shock Warning indicates the potential harm from electrical hazards

and how to avoid the potential problem.

Un Avertissement de Choc Électrique indique le potentiel de chocs sur des

emplacements électriques et comment éviter ces problèmes.

Safety Information

Warning!/ Avertissement!

Always completely disconnect the power cord from your chassis whenever you

work with the hardware. Do not make connections while the power is on. Sensitive

electronic components can be damaged by sudden power surges. Only

experienced electronics personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque vous travaillez

sur celui-ci. Ne pas brancher de connections lorsque l’alimentation est présente.

Des composantes électroniques sensibles peuvent être endommagées par des

sauts d’alimentation. Seulement du personnel expérimenté devrait ouvrir ces

chassis.

Caution/ Attention

Always ground yourself to remove any static charge before touching the CPU card.

Modern electronic devices are very sensitive to static electric charges. As a safety

precaution, use a grounding wrist strap at all times. Place all electronic components

in a static-dissipative surface or static-shielded bag when they are not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge statique avant de

toucher la carte CPU. Les équipements électroniques moderns sont très sensibles

aux décharges d’électricité statique. Toujours utiliser un bracelet de mise à la terre

comme précaution. Placer toutes les composantes électroniques sur une surface

conçue pour dissiper les charge, ou dans un sac anti-statique lorsqu’elles ne sont

pas dans le chassis.

Alternating Current Mise à le terre !

The Protective Conductor Terminal (Earth Ground) symbol indicates the potential

risk of serious electrical shock due to improper grounding.

Le symbole de Mise à Terre indique le risqué potential de choc électrique grave

à la terre incorrecte.

Preface

For your safety carefully read all the safety instructions before using the device. Keep this user

manual for future reference.

•Always disconnect this equipment from any AC outlet before cleaning. Do not use liquid or

spray detergents for cleaning. Use a damp cloth.

•For pluggable equipment, the power outlet must be installed near the equipment and must

be easily accessible.

•Keep this equipment away from humidity.

•Put this equipment on a reliable surface during installation. Dropping it or letting it fall

could cause damage.

•The openings on the enclosure are for air convection and to protect the equipment from

overheating.

•Do not cover the openings.

•Before connecting the equipment to the power outlet make sure the voltage of the power

source is correct.

•Position the power cord so that people cannot step on it. Do not place anything over the

power cord.

•If the equipment is not used for a long time, disconnect it from the power source to avoid

damage by transient over-voltage.

•Never pour any liquid into an opening. This could cause fire or electrical shock.

•Never open the equipment. For safety reasons, only qualified service personnel should

open the equipment.

•All cautions and warnings on the equipment should be noted.

•Do not leave this equipment in an uncontrolled environment where the storage

temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the

equipment.

Caution/Attention

Use the recommended mounting apparatus to avoid risk of injury.

Utiliser l’appareil de fixation recommandé pour éliminer le risque de

blessure.

Warning!/ Avertissement!

Only use the connection cords that come with the product. When in doubt,

please contact the manufacturer.

Utiliser seulement les cordons d’alimentation fournis avec le produit. Si vous

doutez de leur provenance, contactez le manufacturier.

Warning!/ Avertissement!

Always ground yourself against electrostatic damage to the device.

Toujours vérifier votre mise à la terre afin que l’équipement ne se décharge

pas sur vous.

•Cover workstations with approved anti-static material. Use a wrist strap connected

to a work surface and properly grounded tools and equipment.

•Use anti-static mats, heel straps, or air ionizer for added protection.

•Avoid contact with pins, leads, or circuitry.

•Turn off power and input signals before connecting test equipment.

•Keep the work area free of non-conductive materials, such as ordinary plastic

assembly aids and Styrofoam.

•Use filed service tools, such as cutters, screwdrivers that are conductive.

•Always put drivers and PCB’s component side on anti-static foam.

6 7”/ 10.1”/ 15” S Series HMI Quick Start Guide

General Guideline

It is recommended to reboot the device when some functions are defect or inactive. If it still can't

solve the problems please contact your dealer or agent.

Important Information

Federal Communications Commission Radio Frequency Interface Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class "B" digital

device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference

at him own expense.

EC Declaration of Conformity

This equipment is in conformity with the requirement of the

following EU legislations and harmonized standards. Product also

complies with the Council directions.

Electromagnetic Compatibility Directive (2014/30/EU)

•EN55024: 2010 EN 55022: 2010 Class B

oIEC61000-4-2: 2009

oIEC61000-4-3: 2006+A1: 2007+A2: 2010

oIEC61000-4-4: 2012

oIEC61000-4-5: 2014

oIEC61000-4-6: 2013

oIEC61000-4-8: 2010

oIEC61000-4-11: 2004

•EN55022: 2010/AC:2011

•EN61000-3-2:2014

•EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

•EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

0BChapter 1: Introduction

Chapter 1: Introduction

This chapter gives you product overview, describes features and

hardware specification. You will find all accessories that come

with the HMI in the packing list. Mechanical dimensions and

drawings included in this chapter.

8 7”/ 10.1”/ 15” S Series HMI Quick Start Guide

1.1 Introduction

Congratulations on purchasing Winmate® S Series HMI. Winmate continues developing new

generation of Human Machine Interfaces for Industry 4.0 and Internet of Things (IoT).

Our S Series HMI runs on Android 7.1 operating system that allows installing the latest

applications (APPs). There are two USB connectors, USB 3.0 and USB 2.0, onboard to connect

mouse or keyboard and one micro USB OTG for system updates. System memory LPDDR3L of 2

GB ensures stable operation of applications. The HMI devices features P-Cap touchscreen and

have front side IP65 dust and water protection. The HMI devices support an exceptional feature -

LED status light bar. Red, green and blue LED indicators show the status of the machine or

processes afar. It significantly reduces power consumption by keeping the display turned off.

The S Series HMI is suitable for home automation and room management systems. Flat surface is

easy-to-clean and delivers aesthetically pleasing look for any interior. By connecting to centralized

database, it can provide real time update for booking status and available schedule, or perform as

a synchronous display in meetings. Optional RFID reader is especially useful in access control

applications.

1.2 Product Features

Winmate® S Series HMI features:

•7/ 10.1/ 15.6-inch widescreen panel

•Projected capacitive multitouch screen

•Arm Cortex® A72 + Quad-core Cortex®-A53

•Android 7.1 operating system

•1 x USB 3.0, 1 x USB 2.0, PoE IEEE 802.3at (25 W), IEEE 802.3af (15 W)

•Fanless cooling system and ultra-low power consumption

•Front IP65 water and dust proof, rear IP22

•Light design for machine automation, smart factory and IoT applications

0BChapter 1: Introduction

1.3 Unpacking

Carefully remove the box and unpack your HMI device. Please check if all the items listed below

are inside your package. If any of these items are missing or damaged contact us immediately.

Standard factory shipment list:

•HMI Device •Quick Start Guide

(Hardcopy) •Driver CD & User Manual

Varies by product specifications Part No. 915211101045 Varies by product specifications

AC Adapter (12V/ 50W) Power Cord

3 pin Terminal Block to DC

Jack

Part No. 922D050W12VA Varies by country Part No. 94J602G030K0

Package may include optional accessories based on your order

•VESA Desk Stand

PCVS-V1

•VESA Desk Stand

LA-100

•VESA Wall Mount

Bracket LA-106

•Front Side Wall

Mount PCFW-V1

Part No. 99KK00A0000E Part No. 9B0000000128 Part No. 9B0000000412 Part No. 99KK00A0000C

For installation instructions and dimensions of optional accessories refer to Ch.3, “Mounting

Guide”.

10 7”/ 10.1”/ 15” S Series HMI Quick Start Guide

1.4 Mechanical Dimensions

This section describes appearance, connectors’ layout and mechanical dimensions of S Series

HMI. Notice that this is a simplified drawing and some components are not marked in detail.

Please contact our sales representative if you need further product information.

7-inch, W07RK3S-PCO1-POE, W07RK3S-PCO1AC-POE

Unit: mm

Dimensions:189.4 x 145.4 x 36.1

№

Description

№

Description

①Giga LAN / PoE ⑥Micro SD Card Slot

②Terminal Block 12V DC In * ⑦Micro HDMI

③RS-232/422/48 ⑧HF RFID (optional)

④1 x USB 3.0, 1 x USB 2.0 ⑨1W Speaker

⑤USB OTG ⑩RGB LED Light Bar

*Power Device (PD): follows IEEE 802.3at (25 W), IEEE 802.3af (15 W)

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Panel táctil de Winmate

Winmate

Winmate W07IB3S-PCO1AC-POE Manual de usuario

Winmate

Winmate W07IB3S-GCM1(HB) Manual de usuario

Winmate

Winmate G-WIN Manual de usuario

Winmate

Winmate W10IB3S-EHH2 Manual de usuario

Winmate

Winmate R15IB3S-PCC3-PoE Manual de usuario

Winmate

Winmate GC Series Manual de usuario

Winmate

Winmate W05TA3S-PCT3AC Manual de usuario

Winmate

Winmate W22IB3S-PCA3 PPC Manual de usuario

Winmate

Winmate R15IH3S-MRA3FP Manual de usuario

Winmate

Winmate R10L100-PCT2-PoE Manual de usuario

Winmate

Winmate R15IW3S-65C3 Manual de usuario

Winmate

Winmate G-Win Series Manual de usuario

Winmate

Winmate W10IB3S-PCH2AC-PoE S-Series Manual de usuario

Winmate

Winmate W10FA3S-GCH1 Manual de usuario

Winmate

Winmate R10IB3S-SPT2 Manual de usuario

Winmate

Winmate W04FA3S-EHT1 Manual de usuario

Winmate

Winmate R15IB3S-65EX Manual de usuario

Winmate

Winmate W24IB3S-SPA269 Manual de usuario

Winmate

Winmate W04FA3S-EHT1 Manual de usuario

Winmate

Winmate W07FA3S-GCM1 Manual de usuario

Winmate

Winmate R10IBWS-MHP1 Manual de usuario

Winmate

Winmate R15IK3S-SPC3 Manual de usuario

Winmate

Winmate G-WIN GC Series Manual de usuario

Winmate

Winmate G-WIN AMD Rugged Series Manual de usuario

Manuales populares de Panel táctil de otras marcas

FlowLine

FlowLine Data loop Manual de usuario

ALPEX

ALPEX AEx-8 P Series Manual de usuario

Ltech

Ltech E5S Manual de usuario

Harman

Harman AMX MODERO S MSD-701-L2 Manual de usuario

Acnodes

Acnodes PC 1150 Manual de usuario

AIS

AIS IP10IA99 series Manual de usuario

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manual de usuario

YASKAWA

YASKAWA TP 610C Manual de usuario

B&R

B&R Power Panel C Series Manual de usuario

Beijer Electronics

Beijer Electronics X2 control Manual de usuario

AXIOMTEK

AXIOMTEK GOT321W-521 Manual de usuario

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manual de usuario

Qomo

Qomo QIT1386 Manual de usuario

DFI

DFI KS104-CD Manual de usuario

AMX

AMX AXP-PPC Guía

Sartorius

Sartorius X3 PR 5410 Manual de usuario

AMX

AMX Modero X Series Manual de usuario

Advantech

Advantech TPC-30 Series Manual de usuario