Winmate W05TA3S-PCT3AC Manual de usuario

Please read these instructions carefully before using this product, and save this manual for future use.

5” S-Series HMI

W05TA3S-PCT3AC

Freescale® Cortex® A9 i.MX6 Dual Core, 1 GHz

Quick Start Guide

Document Part Number: 9152050I0000

Version 1.1

5" S-Series HMI Quick Start Guide

Contents

Preface 3

Getting Started 4

Unpacking 5

Accessories 5

Description of Parts 6

Connector Description 8

DC Input Connector 8

LAN (RJ45) Connector 8

USB A Type Connector 8

Digital Input / Output Connector 9

Turning On or Off Your Device 10

Turning On 10

Turning OFF 10

Using Camera 11

Camera Application 11

Taking Pictures 11

Opening the Gallery 11

TARS Test Application 12

Location and Interface 12

Testing LED Light Bar 13

Testing HF RFID Reader 14

HF RFID Reader Introduction 14

Scanning HF RFID Tag 14

Testing DIDO 15

Software Developer Support 16

Software System Diagram 16

Winmate Software Development Kit 16

Technical Specifications 17

HMI Device Specifications 17

HF RFID Reader Specifications 18

Preface

No part of this document may be reproduced, copied, translated, or transmitted in any form or

by any means, electronic or mechanical, for any purpose, without the prior written permission

of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including circuits and/or

software described or contained in this manual in order to improve design and/or performance.

We assume no responsibility or liability for the use of the described product(s) conveys no

license or title under any patent, copyright, or masks work rights to these products, and make

no representations or warranties that these products are free from patent, copyright, or mask

work right infringement, unless otherwise specified. Applications that are described in this

manual are for illustration purposes only. We make no representation or guarantee that such

application will be suitable for the specified use without further testing or modification.

Warranty

Our warranty guarantees that each of its products will be free from material and workmanship

defects for a period of one year from the invoice date. If the customer discovers a defect, we

will, at his/her option, repair or replace the defective product at no charge to the customer,

provide it is returned during the warranty period of one year, with transportation charges

prepaid. The returned product must be properly packaged in its original packaging to obtain

warranty service. If the serial number and the product shipping data differ by over 30 days, the

in-warranty service will be made according to the shipping date. In the serial numbers the third

and fourth two digits give the year of manufacture, and the fifth digit means the month (e. g.,

with A for October, B for November and C for December).

For example, the serial number 1W18Axxxxxxxx means October of year 2018.

Customer Service

We provide a service guide for any problem by the following steps: First, visit the website of

our distributor to find the update information about the product. Second, contact with your

distributor, sales representative, or our customer service center for technical support if you

need additional assistance.

You may need the following information ready before you call:

Product serial number

Software (OS, version, application software, etc.)

Description of complete problem

The exact wording of any error messages

In addition, free technical support is available from our engineers every business day. We are

always ready to give advice on application requirements or specific information on the

installation and operation of any of our products.

5" S-Series HMI Quick Start Guide

Getting Started

Congratulations on purchasing Winmate® 5” S-Series HMI. Interactive and smart automation

systems of intelligent buildings are in a fast growing phase. Winmate® multi-touch S-Series HMI is

suitable for home automation and room management systems. Flat surface is easy-to-clean and

delivers aesthetically pleasing look for any interior. By connecting to centralized database, it can

provide real time update for booking status and available schedule, or perform as a synchronous

display in meetings.

Winmate® 5” S-Series HMI powered by TI Cortex® A8 AM3354 1GHz with DSP processor and

support Android 4.4 operating systems. The HMI device features P-Cap touch-screen. In addition,

the HMI device model supports an exceptional feature - LED Light Bar. With the help of red, green,

blue and orange LED indicators you can see the status of the machine or processes afar. It

significantly reduces power consumption by keeping the display turned off.

Winmate® 5” S-Series HMI features:

TI Cortex A8 AM3354 1GHz with Android Operating System

Fanless cooling system and ultra-low power consumption

5'' WVGA TFT (LED backlight) with P-CAP touch screen

Gigabit LAN with PoE (IEEE 802.3AT) Solution

Built-in non-contact HF RFID Module

2MP front-facing camera for interactive communication

Multi-Color(G,R,B) Programmable LED Light Bar Indicator

Unidirectional-Mic and Speaker for VoIP application

Wide-distance (10M) RF controller for Digital Out device trigger application

All-in-one design, completed solution for cost-saving and space-saving

Getting Started

Unpacking

Carefully remove the box and unpack your device. Please check if all the items listed below are

inside your package. If any of these items are missing or damaged contact us immediately.

Accessories

Standard factory shipment list:

5” HMI Device

Quick Start Guide

(Hardcopy)

Power Cable

AC Adapter

(12V/ 50W)

Terminal Block 3 pin

5" S-Series HMI Quick Start Guide

Description of Parts

Front Side:

Rear Side:

I/O Side:

Speaker

Kensington Lock

5” 800*480 LED

panel with PCAP

Touch Screen

2MP Camera

Mic

RFID Reader

LED Light bar

SD Card Slot

DC 12V in

Digital I/O

LAN / PoE

Reset

Button

USB A Type

Description of Parts

Dimensions:

5" S-Series HMI Quick Start Guide

Connector Description

DC Input Connector

DC terminal block power source input is a 3-pin terminal block that has to be secured with

screws to the HMI device housing

LAN (RJ45) Connector

The 5” S-Series HMI supports one 10/100/1000 Mbps Ethernet interface for connecting to the

internet.

USB A Type Connector

Use USB A Type (USB2.0) connector to connect your HMI device to other USB2.0 compatible

devices.

Pin No.

Symbol

Description

VIN+

12V DC Input +

VIN-

12V DC Input -

GND

Ground

Voltage

Minimum Voltage 11.4V

Maximum Voltage 12.6V

Maximum Current 4.2A

Pin №

Signal Name

Pin №

Signal Name

TX1+

TX1-

TX2+

TX2-

TX3+

TX3-

TX4+

TX4-

Pin №

Signal Name

Pin №

Signal Name

+5V

Data-

Data+

GND

Connector Description

Digital Input / Output Connector

Digital Input and Output 2 in / 2 out (one 12V/1A for electromagnetic lock).

Go Refer to Testing DIDO section in this guide to test the DIDO functions.

Pin №

Name

Pin №

Name

GND

DO0

DO1

DO_COM

DI0

DI1

GND

Voltage

Digital output:

Open drain to 40V ; Maximum load 2.0A

Digital input:

Level 0: close to GND; Level 1: 2.5~12V

5" S-Series HMI Quick Start Guide

Turning On or Off Your Device

Turning On

Follow the following steps to turn on your device:

1. Connect the power cable to AC to DC adapter.

2. Connect the open wire of AC to DC adapter to the terminal block female connector and

tighten the screws to secure it to the HMI device.

3. Connect the terminal block female connector to the device's male connector.

4. Plug the power cord to the AC outlet and the device will turn on automatically.

CAUTION

Use only the AC adapter included in your package

(Rating: Output 4.2 A). Using other AC adapters may damage the device.

Turning OFF

Remove the power input to shut down the device.

Press the reset button to reboot the HMI device.

ALTERNATING CURRENT

This product must be grounded. Use only a grounded AC outlet. Install the additional

PE ground wire if the local installation regulations require it.

Reset Button

Otros manuales para W05TA3S-PCT3AC

Tabla de contenidos

Otros manuales de Panel táctil de Winmate

Winmate

Winmate G-Win Series Manual de usuario

Winmate

Winmate PT Series Manual de usuario

Winmate

Winmate W10FA3S-GCH1 Manual de usuario

Winmate

Winmate W07IB3S-POT1 Manual de usuario

Winmate

Winmate W22IK3S-SPA369 Manual de usuario

Winmate

Winmate W27FA3S-CHC1 Manual de usuario

Winmate

Winmate R15IE3S-PTC3 Manual de usuario

Winmate

Winmate R15IK3S-65C3 Manual de usuario

Winmate

Winmate GC Series Manual de usuario

Winmate

Winmate R17IK3S-RKA1ML Manual de usuario

Winmate

Winmate T5-series Manual de usuario

Winmate

Winmate G-WIN AMD Rugged Series Manual de usuario

Winmate

Winmate W07FA3S-EHT1 Manual de usuario

Winmate

Winmate G-WIN Manual de usuario

Winmate

Winmate ARM-11 HMI Series Manual de usuario

Winmate

Winmate P-CAP SERIES Manual de usuario

Winmate

Winmate G-WIN Slim IP65 Manual de usuario

Winmate

Winmate G-WIN Manual de usuario

Winmate

Winmate IP69K Stainless P-Cap Manual de usuario

Winmate

Winmate G-WIN Slim IP65 Manual de usuario

Winmate

Winmate R15IH3S-MRA3FP Manual de usuario

Winmate

Winmate R15IW3S-SPC3 Manual de usuario

Winmate

Winmate R15IH3S-67A3HB Manual de usuario

Winmate

Winmate R15IB3S-65EX Manual de usuario

Manuales populares de Panel táctil de otras marcas

FlowLine

FlowLine Data loop Manual de usuario

ALPEX

ALPEX AEx-8 P Series Manual de usuario

Ltech

Ltech E5S Manual de usuario

Harman

Harman AMX MODERO S MSD-701-L2 Manual de usuario

Acnodes

Acnodes PC 1150 Manual de usuario

AIS

AIS IP10IA99 series Manual de usuario

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manual de usuario

YASKAWA

YASKAWA TP 610C Manual de usuario

B&R

B&R Power Panel C Series Manual de usuario

Beijer Electronics

Beijer Electronics X2 control Manual de usuario

AXIOMTEK

AXIOMTEK GOT321W-521 Manual de usuario

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manual de usuario

Qomo

Qomo QIT1386 Manual de usuario

DFI

DFI KS104-CD Manual de usuario

AMX

AMX AXP-PPC Guía

Sartorius

Sartorius X3 PR 5410 Manual de usuario

AMX

AMX Modero X Series Manual de usuario

Advantech

Advantech TPC-30 Series Manual de usuario