Watchguard AP100 Instrucciones de instalación
WatchGuard
AP100/AP200
Hardware
Guide
AP100, AP200
ii WatchGuard AP100 and AP200
ADDRESS
505 Fifth Avenue South
Suite 500
Seattle, WA 98104
SUPPORT
www.watchguard.com/support
U.S. and Canada +877.232.3531
All Other Countries +1.206.521.3575
SALES
U.S. and Canada +1.800.734.9905
All Other Countries +1.206.613.0895
ABOUT WATCHGUARD
WatchGuard® Technologies, Inc. is a global leader of integrated, multi-function
business security solutions that intelligently combine industry standard hardware,
best-of-breed security features, and policy-based management tools. WatchGuard
provides easy-to-use, but enterprise-powerful protection to hundreds of thousands of
businesses worldwide. WatchGuard is headquartered in Seattle, Wash. with offices
throughout North America, Europe, Asia Pacific, and Latin America.
To learn more, visit WatchGuard.com.
Copyright and Patent Information
Copyright© 2012–2016 WatchGuard Technologies, Inc. All rights reserved.
WatchGuard, the WatchGuard logo, LiveSecurity, and any other mark listed as a trademark in the “Terms of Use” portion of
the WatchGuard Web site that is used herein are either registered trademarks or trademarks of WatchGuard Technologies,
Inc. and/or its subsidiaries in the United States and/or other countries. All other trademarks are the property of their
respective owners.
Printed in the United States of America.
Part Number: 275-4827-001 Rev D
Revised: February 4, 2016
U.S. Patent Nos. 6,493,752; 6,597,661; D473,879. Other Patents Pending.
Notice to Users
Information in this guide is subject to change without notice. Updates to this guide are posted at:
http://www.watchguard.com/wgrd-help/documentation/hardware-guides
Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part of this guide may be
reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express
written permission of WatchGuard Technologies, Inc.
Complete copyright, trademark, patent, and licensing information can be found in
the WatchGuard product documentation. You can find this document online at:
http://www.watchguard.com/wgrd-help/documentation/overview
Hardware Guide 1
Hardware Specifications
The WatchGuard® AP family of wireless access points provide secure, reliable, wireless communications while
delivering high performance and broad coverage—a perfect combination of services to meet the needs of
enterprise-level customers, small businesses, branch offices, campuses, and hotels alike.
WatchGuard AP devices feature 2x2 MIMO (Multiple Input Multiple Output) capability and 802.11 a/b/g/n
wireless coverage and operate on both 2.4GHz (b/g/n) and 5GHz (a/n) spectrums, to provide users with
enhanced reliability and performance. Internal antennas, slim cases, minimalist labeling, and small LEDs,
coupled with wall and ceiling mounting options, make these devices ideal for low profile deployment
scenarios. Power is provided via an AC adapter or optional PoE injector when outlet access is not easily
accessible.
The WatchGuard AP is managed and controlled directly from a WatchGuard XTM device to provide
centralized, secure management and configuration of all WatchGuard wireless devices on your network.
This Hardware Guide describes these WatchGuard AP models:
AP100 — Single-radio 2.4/5 GHz switchable 2x2 MIMO 802.11n, provides up to 300 Mpbs data rate
AP200 — Dual-radio 2.4 GHz and 5 GHz 2x2 MIMO 802.11n, provides up to 600 Mbps data rate
This Hardware Guide applies to WatchGuard AP100 and AP200 devices. If your WatchGuard AP device
has a different model number, your hardware is described in the WatchGuard AP Hardware Guide for
that model.
Requirements
The WatchGuard AP100 or AP200 device must be managed by a WatchGuard XTMdevice that uses Fireware
XTM OS v11.7.2 or higher.
See the AP100/AP200 Quick Start Guide or the WatchGuard System Manager help for informatioin about how
to use your XTM device to manage your WatchGuard AP device.
2WatchGuard AP100 and AP200
Hardware Specifications
Package Contents
WatchGuard AP device
Quick Start Guide
Wall/Ceiling Mounting Kit
T-rail Ceiling Mounting Kit
Mounting bracket
AC adapter (12V) with US, EU, UK, AU region-specific adapter
About Your Hardware
Hardware Specifications
AP100 AP200
MCU Processor Atheros AR9344 533MHz Atheros AR9344 533MHz
Memory: Flash 16 MB 16 MB
Memory: RAM 128 MB (64 MB x 2) 128 MB (64 MB x 2)
Radio (Radio 1) Atheros AR9344 for
switchable 2.4Ghz/5GHz
(Radio 1) Atheros AR9344 for 5GHz
(Radio 2) Atheros AR9382 for 2.4GHz
Gigabit Physical
Layer (PHY)
Atheros AR8035 Atheros AR8035
Radio Type and
Frequency Band
2.4GHz, 802.11b/g/n
5GHz, 802.11a/n
300 Mbps data rate
2.4GHz, 802.11b/g/n
5GHz, 802.11a/n
600 Mbps data rate (300 Mbps per radio)
Antenna Modular High Efficiency PIFA Antenna
Peak Gain:
2.4 to 2.5GHz / 3dBi
5.150-5.875GHz / 4dBi
Modular High Efficiency PIFA Antenna
Peak Gain:
2.4 to 2.5GHz / 3dBi
5.150-5.875GHz / 4dBi
Ethernet interface 1 RJ45 connector for 10/100/1000
Gigabit Ethernet
1 RJ45 connector for 10/100/1000
Gigabit Ethernet
Power Interface DC jack (12V DC input) DC jack (12V DC input)
Power supply 12V 1.25A 12V 1.25A
Hardware Guide 3
Hardware Specifications
Environmental Requirements
To safely install your WatchGuard AP device, we recommend that you:
Install the device indoors.
Make sure the device has adequate clearance for air flow and cooling.
Connect it to a surge-protected power supply to prevent damage from sudden power changes
Other environmental requirements:
Hardware Description
Device Connections and Buttons
Ethernet Network Interface
Standard RJ45 connector that supports link speeds of 10/100/1000 Mbps.
Power Input
If you use the optional 12V AC adapter, connect the AC adapter to the device and to a power source.
Use only the WatchGuard AC power adapter for this AP device model.
If you use a PoE adapter other than the optional PoE adapter from WatchGuard, make sure that it
complies with the IEEE 802.3af/at PoE specifications.
Reset Button
Resets the WatchGuard AP device to factory-default settings. You must use a paper clip or other small
object to press the reset button through the small hole on the top of the device. The reset button
functions differently based on the version of AP device firmware the device uses.
For an AP device that uses AP device firmware 1.2.9.2 or higher
To reset the device to factory-default settings, with the AP device powered on, press and hold
the reset button for at least five seconds. After you reset the device, the Power/Status light
flashes Amber and Green to indicate that the AP device is not paired to a Firebox or XTM device.
To reboot the device, but not reset it to factory-default settings, press the reset button briefly
(less than 5 seconds).
For an AP device that uses AP device firmware 1.2.9.1 or lower
To reset the device to factory-default settings, with the AP device powered on, press and hold
the reset button for at least 12 seconds.
You can see the current AP device firmware version in the Gateway Wireless Controller on the Firebox
or XTM device that manages the AP device.
Operating temperature 32 to 104°F (0 to 40°C)
Operating relative humidity 5% to 90% Non-condensing
Non-operating temperature -40 to 158°F (-40 to 70°C)
Non-operating relative humidity 5% to 90% Non-condensing
4WatchGuard AP100 and AP200
Hardware Specifications
Device Indicators
The front of the AP device has three status indicators.
Indicator Indicator color Interface Status
Wireless Not lit Wireless off or disabled
Amber 2.4GHz and 5GHz wireless network
active
Amber flashing Transmitting and receiving data
Green 5GHz wireless network active
Green flashing Transmitting and receiving data
Red 2.4GHz wireless network active
Red flashing Transmitting and receiving data
Ethernet Not lit No link or disabled
Amber Link speed at 10/100Mbps
Amber flashing Transmitting and receiving data
Green Link speed at 1000Mpbs (Gigabit)
Green flashing Transmitting and receiving data
Power/Status Not lit No power
Amber Device booting
Amber / Green flashing Power on and ready to pair
Green Power on and paired
Hardware Guide 5
Hardware Specifications
AC Power Adapter
The AC power adapter supplies 12V DC power to the WatchGuard AP and includes US, EU, UK, and AU region-
specific adapter disk plugs.
To connect a region-specific disk plug to the AC power adapter:
1. Insert the round disk plug in the AC power adapter at an angle to align with the slots.
2. Rotate the disk clockwise until it clicks into position.
To remove a disk plug from the AC power adapter:
1. Press the Push button on the round disk plug.
2. Rotate the disk counter-clockwise and pull it away from the adapter.
Ethernet Power Injector
You can also power the WatchGuard AP device with an optional Ethernet Power Injector. This Power over
Ethernet (PoE) device allows you to power the WatchGuard AP through an existing ethernet connection. With
this feature, you do not have to position your WatchGuard AP device near a power outlet.
The Ethernet Power Injector provides 56V/15.4W power over a single 10/100 Ethernet port, and also
includes region-specific plugs (US, EU, UK, AU) for connection to a wall outlet.
This device complies with IEEE 802.3af/at PoE specifications. Do not use any PoE adapters that are not
IEEE 802.3af/at compliant as they may damage your device. This device is to be connected only to PoE
networks without routing to the outside plant.
6WatchGuard AP100 and AP200
Hardware Specifications
Connect the Ethernet Power Injector
To connect an Ethernet Power Injector to the WatchGuard AP device:
1. Attach a region-specific plug to the Ethernet Power Injector.
2. Plug the Ethernet Power Injector into an AC power source.
3. Connect a straight-through Ethernet cable from your network backbone (for example, a router, switch,
or hub) to the IN connector on the Ethernet Power Injector.
4. Connect a straight-through Ethernet cable from the WatchGuard AP device Ethernet interface to the
OUT connector on the Ethernet Power Injector.
Ethernet Power Injector Specifications
Ethernet Power Injector
WatchGuard Part # WG8568
Specification IEEE 802.3af/at
AC Input Voltage Rating 100 to 240VAC
Output Voltage 56V
Output Power 15.4W
PoE Power Class 3
Ethernet Interfaces In: RJ-45 for 10/100 Mbps
Out: RJ-45 for 10/100 Mbps and 56V DC
Voltage on pins 4-5 (+) and 7-8 (-).
Region-specific
Adapter Plugs
US, EU, UK, AU
Indicator Green — Valid PoE load detected and connected.
Flashing Green/Red — Invalid load connected.
Red — Fault detected.
Temperature Operating 0 to +40°C
Storage -25 to +65°C
Humidity Operation 5 to 90%
Dimensions L = 80mm (3.15in)
W = 45mm (1.77in)
H = 33mm (1.29in)
Weight 95g (3.35oz.)
Hardware Guide 7
Hardware Specifications
Mounting Instructions
All of the items necessary to install your WatchGuard AP device are included in the package.
Items needed to mount an AP100 or AP200 device
8WatchGuard AP100 and AP200
Hardware Specifications
Ceiling/Wall Mounting
To mount an AP100 or AP200 device to a ceiling or wall:
1. Position the mounting bracket on the wall or ceiling where you want to install the WatchGuard AP
device.
2. Use the mounting bracket as a guide to mark the position of the WatchGuard AP device on the wall or
ceiling.
3. Remove the mounting bracket and insert the large mounting screws into the marks you made on the
ceiling or wall.
4. Insert the long 5x32 screws through the bracket and into the mounting screws.
5. Insert the short 6x12 screws partway into the bottom of the device. Do not tighten the screws
completely. Keep the heads of the screws exposed to attach the device to the mounting bracket.
6. If extra space is required between the device and the mounting bracket, use the spacers and long 6x25
screws from the T-rail mounting hardware kit.
7. To attach the device to the mounting bracket, insert the screw heads from the device into the slots in
the mounting bracket, and rotate the device clockwise to lock the device in place.
Otros manuales para AP100
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Punto de acceso inalámbrico de Watchguard
Watchguard
Watchguard AP332CR Instrucciones de instalación
Watchguard
Watchguard AP AP102 Manual de usuario
Watchguard
Watchguard AP 322 Manual de usuario
Watchguard
Watchguard AP332CR Manual de usuario
Watchguard
Watchguard AP102 Instrucciones de instalación
Watchguard
Watchguard AP100 Manual de usuario
Watchguard
Watchguard AP330 Manual de usuario
Watchguard
Watchguard AP330 Manual de usuario
Watchguard
Watchguard AP330 Instrucciones de instalación
Watchguard
Watchguard AP 327 Series Manual de usuario
Watchguard
Watchguard WatchGuard AP327X O-105E Instrucciones de instalación
Watchguard
Watchguard AP430CR Instrucciones de instalación
Watchguard
Watchguard AP330 Instrucciones de instalación
Watchguard
Watchguard AP430CR Instrucciones de instalación
Watchguard
Watchguard AP325 Instrucciones de instalación
Watchguard
Watchguard AP 320 Instrucciones de instalación
Watchguard
Watchguard AP225W Manual de usuario
Watchguard
Watchguard AP130 Instrucciones de instalación
Watchguard
Watchguard C-130 Manual de usuario
Watchguard
Watchguard AP 320 Manual de usuario
