Vitek VTC-T4T3HR2MD Manual de usuario
VITEK
VITEK
FEATURES
• 1/2.9” 2.1 Megapixel Sony® Exmor™ Progressive Scan
CMOS Sensor
• 30fps live view @ 1920 x 1080p
• True Day/Night by IR Cut Filter
• HD-TVI / HD-CVI / AHD / 960H CVBS Video Output
(Selectable)
• Motorized 2.8~12mmMegaPixel IR Corrected Auto Focus
Varifocal Lens with CoC
• 4 Integrated High Power Dynamic IR LEDs with up to 165’
IR Range
• XD-DNR (2D-DNR + 3D-DNR) Noise Reduction
• Double Shutter Wide Dynamic Range (WDR)
• 16:9 Video format
• IP66 Weather Resistance
• Supports Up The COAX Control (CoC)
• Over 1500’ HD Video Transmission (Depending on cable
characteristics and integrity)
• Optional Junction Box Mount Available (VT-TJB04)
• 12VDC / 24VAC Dual Voltage Operation
• 3 Year Warranty
VTC-T4B4HR2MD
2.1 Megapixel 4-in-1 HD-TVI/
AHD/CVI/CVBS Motorized
Varifocal Bullet Camera with 4
High Power IR LED Illumination
2 3
Safety Precaution
CAUTION: TO REDUCE THE RISK OF ELECTICAL
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
To prevent electrical shock and risk of fire hazards, do not expose this unit
to rain or moisture and only use specified power source..
Warning :
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Main power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power interruptions, it is
recommended that the device be powered from an uninterruptible power supply
(UPS).
The symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electrical shock.
3
Power & Video Connections
Monitor
Video
12VDC / 24VAC Power
Connect the HD-TVI Video or AHD/CVBS video connector to a BNC
patch cable, then to a DVR. Next connect the power connector to a
12VDC or 24VAC power adaptor.
Installation
1) Disconnect power before installation.
2) Confirm proper 12VDC or 24VAC power supply is used to prevent
damage to the camera.
3) Do not use in an environment beyond the boundaries of the
specifications.
On Cable Switch:
Press & Hold button to cycle between HD-TVI, AHD, and CVI
Modes (Green BNC Connection required).
Press & Release the Switch quickly to enter OSD Menu
Screen.
BNC Connections:
Green: HD Connection
Yellow: SD Connection
4 5
ELC
ALC
BRIGHTNESS
SHUTTER
SENS-UP
AGC
KELVIN
R-GAIN
B-GAIN
MODE
LEVEL
H-POS
V-POS
H-SIZE
V-SIZE
WDR WEIGHT
DNR
MODE
DELAY
D->N LEVE
N->D LEVE
IR LED
SMART-IR LVL
POLARITY
SHARPNESS
COLOR GAIN
FREEZE
FLIP
ACE
GAMMA
MODE
LEVEL
IMAGE
DEFOG
OFF
ON
AUTO, MANUAL
LOW, MIDDLE, HIGH
0~20
0~20
OFF, ON
OFF, H-INV, V-INV, HV-INV
OFF, LOW, MIDDLE, HIGH
0.45, 0.5, 0.55, 0.6, 0.65
DAY&NIGHT
AUTO, COLOR, B&W, EXTERN
0~20
0~20
0~20
OFF, ON
0~20
HIGH, LOW
BACKLIGHT
HLC
BLC
OFF
ALL DAY, NIGHT ONLY
0~20
0~20
0~20
0~20
0~20
LOW, MIDDLE, HIGH
OFF, LOW, MIDDLE, HIGH
WHITE BALANCE
MANUAL
AUTO
AUTOext
PRESET
LOW, MIDDLE, HIGH
0~20
0~20
EXPOSURE
0~20
AUTO, MANUAL, FLICKER
OFF, X2, X4, X8, X16, X32
0~20
Main Menu
LENS
Secondary menu
NORMAL, DEBLUR
INDOOR, OUTDOOR, DEBLUR
5
OUTPUT MOD
COLOR SPACE
FRAME RATE
CVBS
USER OFFSET 0~20
VERSION
LANGUAGE
ZONE NUM
ZONE DISP
H-POS
V-POS
H-SIZE
V-SIZE
Y LEVEL
CR LEVEL
CB LEVEL
SENSITIVITY
WINDOW TONE
WINDOW USE
WINDOW ZONE
DET H-POS
DET V-POS
DET H-SIZE
DET V-SIZE
ALARM
ON WEIGHT 0%~100%
ADJUST COLORBAR
LENS ADJ LENS ADJ
RESET ON
EXIT
SPECIAL
SYSTEM
E1080P, 720P
HD-CbCr, YUV, SD-CbCr
25/30, 50/60
PAL, NTSC
BLACK LEVEL
FULL
COMP
V0.0.2
ENG, CHN
PRIVACY
OFF
ON
0~40
0~60
0~40
OFF, ON
0~15
OFF, ON
0~60
0~40
0~40
0~20
0~6
0~3
OFF, ON
0~60
Main Menu Secondary menu
SHADING
OFF
OFF, ON
0~40
0~20
0~20
0~20
MOTION
OFF
ON
6 7
CONSIDER THESE OTHER GREAT
TRANSCENDENT PRODUCTS!
• 4, 8, or 16 Channel HD-TVI/AHD/960H BNC Inputs + IP Camera Support
• 1-Channel IP Camera Support (VT-TTAR410 / VT-TTAR810) / 4-Channel IP Camera
Support (VT-TTAR1620)
• Simple plug and play, point-to-point connection from camera to DVR
• H.264 Compression
• HDMI, VGA, and BNC (Spot) Video Outputs
• 2-Way Audio
• PTZ Control over RS-485
• 4 Alarm inputs / 1 Alarm Output
• Pentaplex: Live Display / Record / Playback / Backup / Remote Access
• 1 Internal SATA2/SATA3 HDD Slot supporting up to 6TB (VT-TTAR410 / VT-TTAR810)
/ 2 Internal SATA2/SATA3 HDD Slots supporting up to 12TB (VT-TTAR1620)
• Applications for iOS & Android
• Remote Viewing over the Internet via Web Browser or LAN
• Mac OS® Client & CMS Central Management Software Included
• Supports both Dynamic and Static IP Addresses
• Control locally via USB Mouse or IR Remote control
VT-TTAR Series
Transcendent Series 4, 8, and 16 Channel HD-TVI/AHD/960H/IP
Digital Video Recorders
VT-TJB04
Optional Junction Box for Cable
Management for use with VTC-
T4T3HR2MD & VTC-T4B4HR2MD
7
Detailed Specifications
Image Sensor
Signal System
Effective Pixels
Resolution
Video Output
Lens
Day/Night
Min. IIIumination
IR LEDs
IR Distance
DSS (Sens-Up)
S/N Ratio
WDR
Digital Noise Reduction (DNR)
White Balance
BLC
Defog
Privacy Mask
Motion Detection
Up the COAX Control (COC)
Transmission Distance
Power Input
Power Consumption (12VDC)
Power Consumption (24VAC)
Weather Resistance
Operation Conditions
Weight
Dimensions
1/2.9” 2.1 Megapixel Sony® Exmor™ Progressive Scan CMOS Sensor
PAL/NTSC
1945(H) × 1097 (V)
HD-TVI / HD-CVI / AHD: 1080p/720p (2.1 MegaPixel) / CVBS: 960H
HD-TVI / HD-CVI / AHD & 960H (Selectable)
Motorized 2.8~12mmMegaPixel IR Corrected Varifocal Lens
True Day/Night by ICR
0.001 Lux @ f2 (B/W) / 0.1Lux @ F2.0 (Color) / 0 Lux (IR ON)
4x High Power Dynamic IR LEDs
165’
OFF / X2 ~ X32
≥50dB (AGC Off)
Double Shutter Wide Dynamic Range (WDR)
XD-DNR (2D-DNR & 3D-DNR)
Auto / Present / External / Manual
Adjustable
Adjustable
16 Programmable Areas
4 Programmable Areas
YES
Up to 1500’ (Depending on cable characteristics & integrity)
Dual Voltage: 12VDC / 24VAC
600mA (IR ON) / 120mA (IR OFF)
300mA (IR ON) / 60mA (IR OFF)
IP66
-4~122 / 10%~90% Humidity
31.04 oz. / 1.94 lbs. / 880g
2.97” x 3.02” x 11.17” (75.4 x 76.8 x 283.7mm)
28492 CONSTELLATION ROAD VALENCIA, CA 91355
WWW.VITEKCCTV.COM
Version 1.0
November 2016
LIMITED PRODUCT WARRANTY
VITEK products carry a three (3) year limited warranty. VITEK warrants
to the purchaser that products manufactured by VITEK are free of any
rightful claim of infringement or the like, and when used in the manner
intended, will be free of defects in materials and workmanship for a
period of three (3) years, or as otherwise stated above, from the date of
purchase by the end user. This warranty is nontransferable and extends
only to the original buyer or end user customer of a VITEK Authorized
Reseller.
The product must have been used only for its intended purpose, and
not been subjected to damage by misuse, willful or accidental damage,
caused by excessive voltage or lightning.
The product must not have been tampered with in any way or the
guarantee will be considered null and void.
This guarantee does not affect your statutory rights.
Contact your local VITEK Reseller should servicing become necessary.
VITEK makes no warranty or guarantee whatsoever with respect to
products sold or purchased through unauthorized sales channels.
Warranty support is available only if product is purchased through a
VITEK Authorized Reseller.
Otros manuales para VTC-T4T3HR2MD
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cámara de seguridad de Vitek
Vitek
Vitek VTD-HOC4F/I Manual de usuario
Vitek
Vitek VTC-C770WS Manual de usuario
Vitek
Vitek Transcendent Series Manual de usuario
Vitek
Vitek VTC-TNB8RMS Manual de usuario
Vitek
Vitek VTC-TTB42R2F Manual de usuario
Vitek
Vitek VTC-IRE30 Manual de usuario
Vitek
Vitek TRANSCENDENT VTD-HOCR2812-VB Manual de usuario
Vitek
Vitek VTC-C2BMS2 Manual de usuario
Vitek
Vitek VTD-A4F/VW Manual de usuario
Vitek
Vitek VTD-IR2811DN Manual de usuario
Vitek
Vitek VTC-IRLED24A Manual de usuario
Vitek
Vitek VT-PTZ220HD Manual de usuario
Vitek
Vitek TRANSCENDENT VTD-TND3RVEB Manual de usuario
Vitek
Vitek VTC-IRM5H-2713 Manual de usuario
Vitek
Vitek VT-PTZ10T Manual de usuario
Vitek
Vitek VTC-EBV49-24 Manual de usuario
Vitek
Vitek VTD-TND4RFA4 Manual de usuario
Vitek
Vitek VTD-MD5CH Manual de usuario
Vitek
Vitek VTC-EB25C Manual de usuario
Vitek
Vitek VTC-BHOC6R4F Manual de usuario
