Vicon CRUISER S660V Instrucciones de funcionamiento

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO

NOT INSERT ANY METALLIC OBJECTS THROUGH THE

VENTILATION GRILLS OR OTHER OPENINGS ON THE

EQUIPMENT.

CAUTION

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to

the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral is

intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

appliance.

FCC COMPLIANCE STATEMENT

FCC INFORMATION: This equipment has been tested and found

to comply with the limits for a Class A digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to

correct the interference at his own expense.

CAUTION: Changes or modifications not expressly approved by

the party responsible for compliance could void the user’s authority

to operate the equipment.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme

NMB-003 du Canada.

CE COMPLIANCE STATEMENT

WARNING

This is a Class A product. In a domestic environment this product

may cause radio interference in which case the user may be

required to take adequate measures.

III

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The

wide blade or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from

the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury

from tip-over.

13. Unplug this apparatus during lightning storms or

when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been moisture, does not

operate normally, or has been dropped.

15. CAUTION – THESE SERVICING INSTRUCTIONS ARE FOR USE

BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE

RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING

OTHER THAN THAT CONTAINED IN THE OPERATING

INSTRUCTIONS UNLESS YOU QRE QUALIFIED TO DO SO.

16. Use Certified/Listed Class 2 power source only.

17. Apparatus shall not be exposed to dripping or splashing and no object

filled with liquids, such as vases, shall be placed on the apparatus.

Table of Contents

Chapter 1 — Introduction ..........................................................................................................1

1.1 Features .............................................................................................................................................1

Chapter 2 — Installation and Configuration.........................................................................2

2.1 Package Contents............................................................................................................................2

2.2 Installation.........................................................................................................................................3

2.3 Basic Configuration of Dome Camera System........................................................................5

2.4 Setting Dome Camera Termination.............................................................................................6

2.5 Setting Dome Camera Address (ID)............................................................................................6

2.6 Setting Dome Camera Protocol and Video.............................................................................13

2.7 Connections....................................................................................................................................13

2.8 Getting Started...............................................................................................................................14

Chapter 3 — Program and Operation...................................................................................15

3.1 Dome Camera Selection ..............................................................................................................15

3.2 Accessing the On-Screen Menu Utility....................................................................................15

3.3 How to control the On-Screen Menu Utility............................................................................16

3.4 Auto Scan (Shortcut: P60P)........................................................................................................16

3.5 Preset (Shortcut: P93P)...............................................................................................................18

3.6 Tour (Shortcut: P70P)...................................................................................................................20

3.7 Pattern (Shortcut: P80P)..............................................................................................................21

3.8 Alarm.................................................................................................................................................22

3.9 Area Title..........................................................................................................................................23

3.10 Privacy Zone.................................................................................................................................23

3.11 Camera Menu................................................................................................................................24

3.12 Dome Setup ..................................................................................................................................27

3.13 Function Run................................................................................................................................33

Appendix A — Specifications.................................................................................................35

Appendix B — Troubleshooting ............................................................................................37

Appendix C — Glossary...........................................................................................................38

Shipping Instructions ...............................................................................................................40

Vicon Standard Equipment Warranty...................................................................................41

Chapter 1 — Introduction

1.1 Features

The dome camera and the keyboard controller make up the building blocks for any

surveillance/security system. Using multiple keyboard controllers and multiple dome cameras, no

site is too large for monitoring. Extensible and flexible architecture facilitates remote control

functions for a variety of external switching devices such as multiplexers and DVRs.

Built-in optical power zoom camera with True Night Shot function

240 Preset positions with the individual camera AE setup

8 Tours consist of Presets, Patterns, Auto Scans and other Tours can be programmed with

over 300 functions and preset locations. While moving, each preset scan can be watched in

smooth Vector Scan mode.

16 Auto Scans with the normal, the vector, and the random mode and the endless auto-pan

(continuous rotation) with 13 speed steps

8 Patterns (up to 200 second) and 8 Privacy Zones

16 Area Titles

1 Alarm input / 1 Alarm output (5VTTL)

Variable speed from 0.1/sec to 380/sec

Three variable speeds (SLOW, NORMAL, TURBO)

Pan/Tilt speed is inversely proportional to the zoom ratio.

Maximum speed is 380/sec with preset command.

Auto Calibration from 0.1to 6(Tilt range is 0to 180)

Programmable user preferences (alarm, preset, title, etc.)

180Digital Flip

Up to 255 selectable camera addresses

Multi-language menu display; password confirmation

Function Run menu using DVR without function key (Pattern, Scan, etc.)

Built-in RS-485 receiver driver

12 VDC or 24 VAC for dome

Use Certified/Listed Class 2 power source only.

Chapter 2 — Installation and Configuration

2.1 Package Contents

The dome camera is designed with a compact, small size, hard dome camera housing.

The housing is constructed of aluminum, steel and plastic. The housing is designed to be

mounted on a wall or a ceiling. The housing meets the Protection Classification IP66 standards

for dust and moisture resistance.

*DomeCamera

* Instruction Manual (This Document) 1

* Template sheet

* Mounting bracket

*Safetylanyard

* Accessory kit

1) Mounting screws (PH6 x 35.0) (4)

2) Plastic anchors (4)

3) O-Rings (4)

4) Torx wrench (1)

* Accessory connector

1) 2-Pin Terminal Block (1)

2) 3-Pin Terminal Block (1)

3) 4-Pin Terminal Block (1)

2.2 Installation

The dome camera is for use in surface or pendant mounting applications, and the mounting

surface must be capable of supporting loads of up to 3.3 lb (1.5 kg). (Pendant mounting must use

pendant mount accessory.)

The dome camera’s mounting bracket should be attached to a structural object, such as hard

wood, wall stud or ceiling rafter, that supports the weight of the dome camera.

CAUTION: A silicone rubber sealant must be applied to seal the housing to secure

waterproofing.

2.2.1 Locking Dome Camera – refer to the Figures that follow

A. Make screw holes on the ceiling using the supplied mounting Template Sheet (Figure A).

B. Fix the Mounting Bracket to the ceiling using supplied Anchors (4x) and Mounting Screws (4x)

(Figure B).

C. Hook the Safety Lanyard to the Safety Lanyard Hook of the Mounting Bracket (Figure C).

D. Align the locking tap on the bracket and the locking slot on the base of the dome (Figure D).

E. Turn the dome counterclockwise about 10 degrees to the locked position (Figure E).

CAUTION 1: Before installing mounting bracket to surface, pre-adjust the four mounting

screws "A" on the base of the dome camera to best match the mounting

bracket locked position. Unscrew the locking screw on the side of the dome's

base and fit the tab of the mounting bracket into the locking slot. Screws "A"

should not be too tight or too loose when the dome is in the locked position.

After setting the proper positions of screws "A" remove the mounting bracket

and install it to the proper surface. If it is too difficult to lock the dome in

position after the mounting bracket has been installed readjust the screws "A"

by unscrewing them a small amount and try to install dome camera again.

CAUTION 2: Set the termination and ID address of the dome before final installation as

described in section 2.3 (Figure 2), 2.4 and 2.5.

2.3 Basic Configuration of Dome Camera System

Figure 1 – Basic Installation Diagram

The dome camera must be installed by qualified service personnel in accordance with all local

and federal electrical and building codes.

Tabla de contenidos

Otros manuales de Cámara de seguridad de Vicon

Vicon

Vicon ROUGHNECK V-CELL-HD-B Manual de usuario

Vicon

Vicon Surveyor 282-00-02 Series Manual de usuario

Vicon

Vicon CE102D Manual de usuario

Vicon

Vicon ROUGHNECK V910 Manual de usuario

Vicon

Vicon Surveyor MKII Series XX282-00-01 Manual de usuario

Vicon

Vicon ROUGHNECK V910 Manual de usuario

Vicon

Vicon SurveyorVFT SVFT-C266M Manual de usuario

Vicon

Vicon VC600 Manual de usuario

Vicon

Vicon Roughneck AI V2000D Series Manual de usuario

Vicon

Vicon XX075-10 Manual de usuario

Vicon

Vicon Surveyor MKII PTZ SV36W Manual de usuario

Vicon

Vicon V980D Series Manual de usuario

Vicon

Vicon IX 8000 IR Manual de usuario

Vicon

Vicon XX258-50-01 Roughneck Series Manual de usuario

Vicon

Vicon XX235-01-01 Instrucciones de funcionamiento

Vicon

Vicon 240-60 Series Manual de usuario

Vicon

Vicon VC-600W Manual de usuario

Vicon

Vicon CE202D-N Manual de usuario

Vicon

Vicon roughneck V900 Manual de usuario

Vicon

Vicon V661V-Series Instrucciones de funcionamiento

Vicon

Vicon V960-N Series Manual de usuario

Vicon

Vicon Roughneck V920D Series Manual de usuario

Vicon

Vicon SurveyorVFT SVFT-UPM-1 Manual de usuario

Vicon

Vicon V960-N Series Manual de instrucciones

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario

Lumens

Lumens VC-A50PNW Manual de usuario