Ubiquiti EdgeSwitch Manual de usuario

EdgeSwitch Rack-Mount Brackets (Qty. 2) Bracket Screws (M4, Qty. 8)

Mounting Screws (Qty. 4) Cage Nuts (Qty. 4) Power Cord

Package Contents

Installation Requirements

Phillips screwdriver (for rack- or wall-mounting)

Standard-sized, 19" wide rack with a minimum of 1U height available (for rack-mounting)

Use compatible ber SFP modules with the appropriate ber optic cabling. For information

about compatible ber SFP modules, visit:

ubnt.link/SFP_DAC_Compatibility

For indoor applications, use Category 5 (or above) UTP cabling approved for indoor use.

For outdoor applications, shielded Category 5 (or above) cabling should be used for all

wired Ethernet connections and should be grounded through the AC ground of the power

supply.

We recommend that you protect your networks from harmful outdoor environments and

destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For

more details, visit:

ui.com/toughcable

Note:

Although the cabling can be located outdoors, the EdgeSwitch itself should be

housed inside a protective enclosure.

Hardware Overview

ES-12F Quick Start Guide

Click for

Table of Contents

System LED

SFP Speed/Link/Act LED (Ports 1 - 12)

RJ45 Speed/Link/Act LED (Ports 13 - 16)

Note:

The System LED functionality has been updated with rmware v1.8.0. We

recommend that you update the EdgeSwitch to the latest rmware.

Flashing White Bootup in progress.

White Ready for use, not connected to Ubiquiti® Network

Management System (UNMS™).

Blue Ready for use, connected to UNMS.

Steady Blue with Occasional

Flashing Ready for use, unable to connect to UNMS, check

connection to UNMS server.

Quickly Flashing Blue Used to locate a device in UNMS.

Alternating

Blue/White Firmware upgrade in progress.

Oﬀ No Link

Amber Link Established at 100 Mbps

Flashing Indicates Activity

Green Link Established at 1000 Mbps (1 Gbps)

Flashing Indicates Activity

Oﬀ No Link

ES-12F Quick Start Guide

Click for

Table of Contents

SFP (Ports 1 - 12)

RJ45 (Ports 13 - 16)

Reset Button

Console

DC Input

Amber Link Established at 10/100 Mbps

Flashing Indicates Activity

Green Link Established at 1000 Mbps (1 Gbps)

Flashing Indicates Activity

Hot-swappable SFP ports support 1 Gbps connections. Ports 1-8 also support 100 Mbps.

RJ45 ports support 10/100/1000 Ethernet connections.

There are two methods to reset the EdgeSwitch to factory defaults:

Runtime Reset (Recommended)

The EdgeSwitch should be running after bootup is complete, and the System LED is white.

Press and hold the Reset button. The EdgeSwitch will reboot, and the System LED

becomes blue after three seconds. Continue to hold the Reset button for about 15

seconds until the System LED ashes blue for two seconds. This indicates that the

EdgeSwitch has reset to its factory defaults.

Power-on Reset

1. Disconnect the power from the EdgeSwitch.

2. While connecting the power to the EdgeSwitch, hold the Reset button for about 15

seconds until the System LED ashes blue for two seconds. This indicates that the

EdgeSwitch has reset to its factory defaults.

RJ45 serial console port for Command Line Interface (CLI) management. Use an RJ45-to-

DB9, serial console cable, also known as a rollover cable, to connect the Console port to

your computer. Then congure the following settings as needed:

Baud rate 115200

Data bits 8

Parity NONE

Stop bits 1

Flow control NONE

The 25VDC input can connect a redundant or stand-alone DC power source (not included)

with minimum power: 56W, 25 to 16V, and 2.5 mm DC power inline connector.

Note:

You can use the redundant DC power source as a hot spare; if the internal

AC/DC power supply no longer provides power, then the EdgeSwitch will switch

to the DC power source without interrupting its operation.

ES-12F Quick Start Guide

Click for

Table of Contents

Power

Connect the included Power Cord to the Power port.

Hardware Installation

Mounting in a Rack (Optional)



ES-12F Quick Start Guide

Click for

Table of Contents

Connecting Power

ES-12F Quick Start Guide

Click for

Table of Contents

Connecting SFP

ES-12F Quick Start Guide

Click for

Table of Contents

ES-12F Quick Start Guide

Click for

Table of Contents

Connecting RJ45

Accessing the Conguration Interface

The EdgeSwitch is set to DHCP by default, so it will try to automatically obtain an IP address. If

that fails, then it will use the default fallback IP address, 192.168.1.2. Proceed to the

appropriate section, DHCP or

“Fallback IP Address”

DHCP

Use one of the following methods:

Set up the DHCP server to provide a specic IP address to the EdgeSwitch based on its

MAC address (on the label).

ES-12F Quick Start Guide

Click for

Table of Contents

Let the EdgeSwitch obtain an IP address and then check the DHCP server to see which IP

address was assigned.

To log in, follow these steps:

1. Launch your web browser. Type the appropriate IP address in the address eld. Press enter

(PC) or return (Mac).

2. Enter ubnt in the Username and Password elds. Click Sign In.

The EdgeSwitch Conguration Interface will appear. Customize additional settings as needed.

For more information, refer to the EdgeSwitch documentation, which is available at

ui.com/download/edgemax

Fallback IP Address

1. Ensure that your computer (or other host system) is connected to the EdgeSwitch.

2. Congure the Ethernet adapter on your host system with a static IP address on the

192.168.1.x subnet.

3. Launch your web browser. Type the appropriate IP address in the address eld (192.168.1.2

is the default fallback IP address). Press enter (PC) or return (Mac).

4. Enter ubnt in the Username and Password elds. Click Sign In.

ES-12F Quick Start Guide

Click for

Table of Contents

5. The EdgeSwitch Conguration Interface will appear. Click the System Settings tab.

6. Change the IP Address to a unique IP address. Click Apply.

ES-12F Quick Start Guide

Click for

Table of Contents

Este manual sirve para los siguientes modelos

Otros manuales de Cambiar de Ubiquiti

Ubiquiti

Ubiquiti ES-24-250W Manual de usuario

Ubiquiti

Ubiquiti UniFi USW-Industrial Manual de usuario

Ubiquiti

Ubiquiti EdgeSwitch ES-16-XG Manual de usuario

Ubiquiti

Ubiquiti ES-48-500W Manual de usuario

Ubiquiti

Ubiquiti UniFi SWITCH 8 60W Manual de usuario

Ubiquiti

Ubiquiti 0817882025218 Manual de usuario

Ubiquiti

Ubiquiti ETHERMAGIC EM-S Manual de usuario

Ubiquiti

Ubiquiti EdgeSwitch 5XP Manual de usuario

Ubiquiti

Ubiquiti EdgeSwitch ES-16-150W Manual de usuario

Ubiquiti

Ubiquiti UniFi USW-Pro-48-POE Manual de usuario

Ubiquiti

Ubiquiti UniFi US-24-250W Manual de usuario

Ubiquiti

Ubiquiti EdgePoint S16 Manual de usuario

Ubiquiti

Ubiquiti EdgeSwitch 5XP Manual de usuario

Ubiquiti

Ubiquiti UA-Hub Manual de usuario

Ubiquiti

Ubiquiti UniFi US-48-500W Manual de usuario

Ubiquiti

Ubiquiti ES-24-250W Manual de usuario

Ubiquiti

Ubiquiti US-XG-6POE Manual de usuario

Ubiquiti

Ubiquiti UniFi Switch 48 US-48-500W Manual de usuario

Ubiquiti

Ubiquiti UniFi USW-Industral Guía

Ubiquiti

Ubiquiti UniFi US-24-500W Manual de usuario

Ubiquiti

Ubiquiti EdgeSwitch 8 Manual de usuario

Ubiquiti

Ubiquiti UniFi Manual de usuario

Ubiquiti

Ubiquiti USW-24 Manual de usuario

Ubiquiti

Ubiquiti US-24 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario