Ubiquiti ES-48-500W Manual de usuario
1
EdgeSwitch
Mounting Screws (Qty. 4)
Cage Nuts (Qty. 4)
Power Cord
Package Contents
Installation Requirements
Phillips screwdriver
Standard-sized, 19" wide rack with a minimum of 1U height available
For indoor applications, use Category 5 (or above) UTP cabling approved for
indoor use.
For outdoor applications, shielded Category 5 (or above) cabling should be used
for all wired Ethernet connections and should be grounded through the AC
ground of the power supply.
We recommend that you protect your networks from harmful outdoor
environments and destructive ESD events with industrial-grade, shielded Ethernet
cable from Ubiquiti. For more details, visit: ui.com/toughcable
Note: Although the cabling can be located outdoors, the EdgeSwitch
itself should be housed inside a protective enclosure.
ES-48-500W, ES-48-750W Quick Start Guide
2
System LED
RJ45 PoE LED (Ports 1 - 48)
Hardware Overview
Note: The System LED functionality has been updated with firmware
v1.8.0. We recommend that you update the EdgeSwitch to the latest
firmware.
Flashing White Bootup in progress.
White
Ready for use, not connected to Ubiquiti Internet
Service Provider (UISP™). See “UISP
Management”.
Blue Ready for use, connected to UISP.
Steady Blue with
Occasional Flashing
Ready for use, unable to connect to UISP, check
connection to UISP server.
Quickly Flashing Blue Used to locate a device in UISP.
Alternating
Blue/White Firmware upgrade in progress.
Off No PoE
3
RJ45 Speed/Link/Activity LED (Ports 1 - 48)
SFP+ Speed/Link/Activity LED (Ports 1 - 2)
SFP Speed/Link/Activity LED (Ports 1 - 2)
RJ45 (Ports 1 - 48)
SFP+ (Ports 1 - 2)
SFP (Ports 1 - 2)
Amber IEEE 802.3af/802.3at
Green 24V Passive
Off No Link
Amber
Link Established at 10/100 Mbps
Flashing Indicates Activity
Green
Link Established at 1000 Mbps (1 Gbps)
Flashing Indicates Activity
Off No Link
Green
Link Established at 1 Gbps
Flashing Indicates Activity
White
Link Established at 10 Gbps
Flashing Indicates Activity
Off No Link
Green
Link Established at 1 Gbps
Flashing Indicates Activity
RJ45 ports support Power over Ethernet (PoE) and 10/100/1000 Ethernet
connections.
Hot-swappable SFP+ ports support 1/10 Gbps connections.
Hot-swappable SFP ports support 1 Gbps connections.
5
OR
6
3.
Connecting Ethernet
7
Note: The PoE settings for ports 1-48 are set to PoE+ auto by default, so
802.3af/at devices can be plugged in and automatically receive PoE. For
instructions on how to enable 24V passive PoE, refer to “Configuring PoE
Settings”.
Connecting SFP+/SFP
These ports support the specified module types at the following speeds:
Ports SFP+ Module Type SFP Module Type
SFP+ 1-2 10 Gbps 1 Gbps
SFP 1-2 (Not supported) 1 Gbps
1.
8
2.
3.
9
For information about compatible fiber SFP+ or SFP modules, visit:
ubnt.link/SFP_DAC_Compatibility
Accessing the Configuration Interface
The EdgeSwitch is set to DHCP by default, so it will try to automatically obtain an IP
address. If that fails, then it will use the default fallback IP address, 192.168.1.2.
Proceed to the appropriate section, DHCP or “Fallback IP Address”:
DHCP
Use one of the following methods:
Set up the DHCP server to provide a specific IP address to the EdgeSwitch
based on its MAC address (on the label).
Let the EdgeSwitch obtain an IP address and then check the DHCP server to see
which IP address was assigned.
To log in, follow these steps:
1. Launch your web browser. Type the appropriate IP address in the address field.
Press enter (PC) or return (Mac).
2. Enter ubnt in the Username and Password fields. Click Sign In.
3. The EdgeSwitch Configuration Interface will appear. Customize additional
settings as needed.
For more information on PoE configuration, refer to “Configuring PoE Settings”. For
more information, refer to the EdgeSwitch documentation, which is available at
ui.com/download/edgemax
Fallback IP Address
10
Ensure that your computer (or other host machine) is connected to the
EdgeSwitch.
2. Configure the Ethernet adapter on your host system with a static IP address on
the 192.168.1.x subnet.
3. Launch your web browser. Type the appropriate IP address in the address field
(192.168.1.2 is the default fallback IP address). Press enter (PC) or return (Mac).
4. Enter ubnt in the Username and Password fields. Click Sign In.
5. The EdgeSwitch Configuration Interface will appear. Go to Settings .
6. Change the IP Address to a unique IP address. Click Apply.
Note: If you change the IP settings, then the session will be cut off, and you
will need to reconnect to the EdgeSwitch using the new IP address.
Customize additional settings as needed. For more information on PoE
configuration, refer to “Configuring PoE Settings”.
UISP Management
You can manage your device using UISP, which lets you configure, monitor,
upgrade, and back up your devices using a single application. Get started at
uisp.ui.com
Configuring PoE Settings
The PoE settings for ports 1-48 are set to PoE+ by default, so 802.3af/at devices
can be plugged in and automatically receive PoE.
WARNING: Before activating 24V passive PoE, ensure that the connected
device supports PoE and the supplied voltage.
1. Go to Dashboard .
2. For the Ethernet port you want to configure, click the PoE drop-down menu.
3. Select the appropriate mode: Off, 24V, or PoE+.
For more information, refer to the EdgeSwitch documentation, which is available at
ui.com/download/edgemax
Specifications
Otros manuales para ES-48-500W
2
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cambiar de Ubiquiti
Ubiquiti
Ubiquiti UniFi USW-Industrial Manual de usuario
Ubiquiti
Ubiquiti ETHERMAGIC EM-S Manual de usuario
Ubiquiti
Ubiquiti US-16-XG Manual de usuario
Ubiquiti
Ubiquiti TS-5-POE ToughSwitchPoE Manual de usuario
Ubiquiti
Ubiquiti ES-24-250W Manual de usuario
Ubiquiti
Ubiquiti UnFi US-48-500W Manual de usuario
Ubiquiti
Ubiquiti UniFi US-24-250W Manual de usuario
Ubiquiti
Ubiquiti EdgeSwitch 8 Manual de usuario
Ubiquiti
Ubiquiti USW--Pro--48 Manual de usuario
Ubiquiti
Ubiquiti NanoSwitch N-SW Manual de usuario
Ubiquiti
Ubiquiti US-24 Manual de usuario
Ubiquiti
Ubiquiti 0810354023262 Manual de usuario
Ubiquiti
Ubiquiti unifi switch 8 Manual de usuario
Ubiquiti
Ubiquiti US-48 Manual de usuario
Ubiquiti
Ubiquiti UniFi USW-16-POE Manual de usuario
Ubiquiti
Ubiquiti unifi switch 8 Manual de usuario
Ubiquiti
Ubiquiti ES-48-500W Manual de usuario
Ubiquiti
Ubiquiti UniFi USW-16-POE Manual de usuario
Ubiquiti
Ubiquiti UniFi Switch 24 US-24-250W Manual de usuario
Ubiquiti
Ubiquiti TS-5-POE ToughSwitchPoE Manual de usuario
