Ubiquiti UF-OLT-4 Manual de usuario

UFiber OLT-4 SC/UPC GPON SFP

Transceiver (UF‑GP‑B+)

Mounting Brackets (Qty. 2)

Bracket Screws (Qty. 8) Mounting Screws (Qty. 4) Cage Nuts (Qty. 4)

Power Cord Rubber Feet (Qty. 4)

Package Contents

System Requirements

Linux, Mac OS X, or Microsoft Windows 7/8/10

Web Browser: Google Chrome (Other browsers may have limited functionality)

Installation Requirements

Phillips screwdriver (for rack- or wall-mounting)

Standard-sized, 19" wide rack with a minimum of 1U height available (for rack-

mounting)

UF-OLT-4 Quick Start Guide

System LED

PON LED (Ports 1 - 4)

SFP+ LED (Port 1)

Compatible PON SFP and SFP+ transceivers with appropriate ﬁber optic cabling

and accessories. For information about compatible ﬁber transceivers, visit:

ubnt.link/UFiber-OLT-Modules

Before You Begin

Designing your ﬁrst GPON deployment requires speciﬁc knowledge and planning.

For information on GPON network design and installation, including important

considerations and best practices, refer to:

ubnt.link/UFiber-GPON-Getting-Started

ubnt.link/Designing-a-GPON-Network

For details on conﬁguring UFiber devices for the ﬁrst time to allow ONU LAN ports to

provide connectivity, refer to: ubnt.link/UFiber-Initial-Conﬁguration

Hardware Overview

Blue/Flashing Initializing/Booting Up

White Ready for Use

Off No Link

White/Flashing GPON Link/Activity

Off No Link

UF-OLT-4 Quick Start Guide

MGMT LED

GPON (Ports (PON 1- 4)

SFP+ (Port 1)

MGMT Port

Console Port

USB Port

Reset Button

Green/Flashing 1G Link/Activity

White/Flashing 10G Link/Activity

Off No Link

Amber/Flashing 10/100 Link/Activity

Green/Flashing 1000 Link/Activity

Gigabit Passive Optical Network ports support up to 128 clients on each port.

Hot-swappable SFP+ port supports 1G or 10G connections.

10/100/1000 Ethernet port used for out‑of‑band management. For ﬁrmware

version 4.1 and newer, it is set to DHCP Client with the fallback IP address,

192.168.1.20/24.

Note: Previous ﬁrmware versions default to a static IP: 192.168.1.1.

RJ45 serial console port for Command Line Interface (CLI) management. Use an

RJ45-to-DB9, serial console cable, also known as a rollover cable, to connect the

Console port to your computer. (If your computer does not have a DB9 port, then

you will also need a DB9 adapter.) Then conﬁgure the following settings as

needed:

Baud rate 57600

Data bits 8

Parity NONE

Stop bits 1

Flow control NONE

Reserved for future use.

UF-OLT-4 Quick Start Guide

DC Power Jack

Power

There are two methods to reset the device to factory defaults:

Runtime reset (recommended) The device should be running after bootup is

complete. Press and hold the Reset button for about 10 seconds until the

MGMT LED starts ﬂashing and then becomes solidly lit. After a few seconds,

the LED will turn off, and the device will automatically reboot.

Note: To press the Reset button, insert a straightened paper clip (or

similar object) into the hole shown above. Do not use an object that

can break and become lodged in the hole.

Power-on reset Disconnect power from the device. Press and hold the Reset

button while connecting power to the device. Keep holding the button until the

MGMT LED starts ﬂashing and then stops ﬂashing after a few seconds.

The 24VDC input can connect a redundant or stand-alone DC power source (not

included) with minimum power: 56W, 25 to 16V, and 2.5 mm DC power inline

connector.

Note: You can use the redundant DC power source as a hot spare; if

the internal AC/DC power supply no longer provides power, then the

device will switch to the DC power source without interrupting its

operation.

Connect the included Power Cord to the Power port.

Hardware Installation

Mounting

UF-OLT-4 Quick Start Guide

2. 

UF-OLT-4 Quick Start Guide

Connecting a PON Module

WARNING: Never look directly into the ends of ﬁber or modules. The

emitted light could cause damage to the eye.

WARNING: Until ready for use, keep modules and ﬁber patch cables

covered using the included protective caps to ensure the connections stay

clean.

Note: One GPON SFP transceiver (model UF-GP-B+) is included. Use a

compatible PON SFP transceiver with the appropriate ﬁber optic cabling for

each PON port. For information on compatible ﬁber transceivers, visit:

ubnt.link/UFiber-OLT-Modules

UF-OLT-4 Quick Start Guide

Connecting SFP+

UF-OLT-4 Quick Start Guide

Accessing the Conﬁguration Interface

The following instructions apply to ﬁrmware version 4.1 and newer.

Note: Previous ﬁrmware versions default to a static IP: 192.168.1.1.

1. Connect an Ethernet cable from the MGMT port on the device to a LAN segment

that has an existing DHCP server.

UF-OLT-4 Quick Start Guide

Tabla de contenidos

Otros manuales de Hardware de red de Ubiquiti

Ubiquiti

Ubiquiti PowerBeam airMAX AC Gen2 PBE-5AC-Gen2 Manual de usuario

Ubiquiti

Ubiquiti airVision-C Manual de usuario

Ubiquiti

Ubiquiti PBE-5AC-GEN2-5-EU Manual de usuario

Ubiquiti

Ubiquiti UniFi LED ULED-AT Manual de usuario

Ubiquiti

Ubiquiti mFi mPort Manual de usuario

Ubiquiti

Ubiquiti PowerBeam AC Gen 2 Manual de usuario

Ubiquiti

Ubiquiti R5AC-PTP Manual de usuario

Ubiquiti

Ubiquiti UniFi UAP Manual de usuario

Ubiquiti

Ubiquiti UniFi Cloud Key Gen2 Plus Manual de usuario

Ubiquiti

Ubiquiti Nano G Manual de usuario

Ubiquiti

Ubiquiti Loco5AC Manual de usuario

Ubiquiti

Ubiquiti UniFi Cloud Key Manual de usuario

Ubiquiti

Ubiquiti UAP-AC-PRO Manual de usuario

Ubiquiti

Ubiquiti ER-4 Manual de usuario

Ubiquiti

Ubiquiti UniFi Dream Machine Pro Manual de usuario

Ubiquiti

Ubiquiti UniFi US-24-250W Manual de usuario

Ubiquiti

Ubiquiti USW-24 Manual de usuario

Ubiquiti

Ubiquiti UniFi US-48-500W Manual de usuario

Ubiquiti

Ubiquiti NS-5AC Manual de usuario

Ubiquiti

Ubiquiti mPort-S mPort Serial Manual de usuario

Ubiquiti

Ubiquiti ES-10X Manual de usuario

Ubiquiti

Ubiquiti U-Installer Manual de usuario

Ubiquiti

Ubiquiti RocketDish RD-5G30 Manual de usuario

Ubiquiti

Ubiquiti USW-24 Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario