Ubiquiti UF-LOCO Manual de usuario

System Requirements

UF-LOCO Quick Start Guide

Included only in the single package of the UF-LOCO.

wall mount bracket

power adapter

Screws (qty: 4)

Micro-USB* (5 V, 1 A)

UFiber loco

Screw plugs (qty: 4)

Linux, Mac OS X o Microsoft Windows 7/8/10

ubnt.link/UFiber-GPON-Getting-Started

ubnt.link/Designing-a-GPON-Network

To learn more about how to configure UFiber devices for the first time to allow the

Optical Network Unit (ONU) LAN ports to provide

Designing your first deployment of a GPON network requires specific planning and

knowledge. For more information on designing and installing a GPON network, including

important considerations and best practices, see:

Web browser: Google Chrome (other browsers may have limited functionality)

Package content

Before starting

Machine Translated by Google

Reset button

Puerto PON

The Reset button has two functions for the UF-LOCO:

The GPON SC/APC port supports 2.488 Gbps downstream and 1.244 Gbps upstream

WAN connections.

connectivity, see: ubnt.link/UFiber-Initial-Configuration

UF-LOCO Quick Start Guide

Reset – Quickly press and release the Reset button. All three signal LEDs will flash amber.

power port

Restore Factory Default Settings: Press and hold the Reset button for more than five seconds.

hardware description

Machine Translated by Google

UF-LOCO Quick Start Guide The

Micro-USB power adapter connects to this port to supply power.

ÿ -11 dBm

LED signal indicators

Signal strength: too low

ethernet power

disabled Start

The RJ45 Ethernet LAN port supports 10/100/1000 Mbps connections and 24V passive PoE to

power the device.

Signal strength: low

< -28 dBm

Check the quality of the fiber connection and calculate the

total optical loss of the optical splitters.

LED the Ethernet

ÿ -28 dBm

Signal strength: too strong

ÿ -8 dBm

disabled

Signal strength: good

Add an optical splitter or a 5 or

10 dB optical attenuator.

ÿ -25 dBm

No signal

No ethernet connection

White

Signal strength: strong

With ethernet connection

Machine Translated by Google

Power LEDs

Switched on

The UF-LOCO has not been authorized or it

cannot communicate with the OLT. Check

passwords and OLT settings.

White

no authority

Off

Check the fiber cables and connectors and

UF-LOCO Quick Start Guide make sure the OLT is

working properly.

disabled

hardware installation

wall mount

Machine Translated by Google

UF-LOCO Quick Start Guide

Machine Translated by Google

UF-LOCO Quick Start Guide

Machine Translated by Google

UF-LOCO Quick Start Guide

Machine Translated by Google

UF-LOCO Quick Start Guide

fiber connection

WARNING: DO NOT connect the device directly to a UFiber GPON module

(UF-GP-B+ or UF-GP-C+). Doing so will damage the optics of the device.

Make sure that the signal level received by the device never exceeds -8 dBm.

Use a UFiber PLC splitter to add attenuation as needed.

WARNING: Never look directly into the ends of the fiber or modules.

The light they emit can cause eye damage.

WARNING: Until ready to use, keep fiber patch cables and modules

covered with the included protective caps to ensure connections remain

clean.

Machine Translated by Google

UF-LOCO Quick Start Guide

LAN connection

Power connection

Machine Translated by Google

UF-LOCO Quick Start Guide

Note: The airCube provides Wi-Fi connectivity with a PoE gateway, making it

the ideal complement to the UF-LOCO in CPE installations.

WARNING: The port switch must meet the power specifications

listed in this quick start guide.

Machine Translated by Google

Otros manuales para UF-LOCO

Tabla de contenidos

Otros manuales de Hardware de red de Ubiquiti

Ubiquiti

Ubiquiti R5AC-PTP Manual de usuario

Ubiquiti

Ubiquiti USW-24 Manual de usuario

Ubiquiti

Ubiquiti UBI-POWERBEAM-M5-300 Manual de usuario

Ubiquiti

Ubiquiti AM-5AC21-60 Manual de usuario

Ubiquiti

Ubiquiti UniFi UAP Manual de usuario

Ubiquiti

Ubiquiti mFi mPort Manual de usuario

Ubiquiti

Ubiquiti UBB Manual de usuario

Ubiquiti

Ubiquiti PowerBeam PBE-5AC-400-ISO Manual de usuario

Ubiquiti

Ubiquiti PowerBeam AC Gen 2 Manual de usuario

Ubiquiti

Ubiquiti PowerBeam PBE-5AC-500-ISO Manual de usuario

Ubiquiti

Ubiquiti UniFi Dream Machine Pro Manual de usuario

Ubiquiti

Ubiquiti RocketM Series Manual de usuario

Ubiquiti

Ubiquiti ES-10X Manual de usuario

Ubiquiti

Ubiquiti airVision-C Manual de usuario

Ubiquiti

Ubiquiti Airmax NBE-M2-400 Manual de usuario

Ubiquiti

Ubiquiti UniFi US-24-250W Manual de usuario

Ubiquiti

Ubiquiti NS-5AC Manual de usuario

Ubiquiti

Ubiquiti PowerBeam M PBE-M2-400 Manual de usuario

Ubiquiti

Ubiquiti NanoBeam M5 Manual

Ubiquiti

Ubiquiti UniFi Cloud Key Manual de usuario

Ubiquiti

Ubiquiti airMAX PowerBridge M10 PBM10 Manual de usuario

Ubiquiti

Ubiquiti PowerBeam PBE-5AC-500 Manual de usuario

Ubiquiti

Ubiquiti EdgeSwtch 5XP Manual de usuario

Ubiquiti

Ubiquiti UniFi Cloud Key Gen2 Plus Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario