Triplett RHT02 Manual de usuario

User Manual

RHT02 Hygro-Thermometer Pen

RHT05 Hygro-Thermometer Pen with Wet

Bulb and Dew Point Functions

Introduction

Thanks for purchasing the Triplett RHT02/RHT05 Hygro-Thermometer Pen

The models RHT02/RHT05 can measure Relative Humidity from 10% to

90% and Temperature from -4 to 140oF (-20 to 60oC). Advanced features

include MIN/MAX Memory, Push-button Calibration, Display Hold, and

Automatic Power Off. The model RHT05 adds Wet Bulb (Wb) and Dew

Point (DP) calculated measurements.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Features

°F/°C switchable

Data Hold freezes the reading on the display

Min/Max records the highest and lowest readings

Auto power off with disable

Built-in Humidity calibration using optional calibration solutions

Includes CR2032 battery

1-year warranty

Description

METER DESCRIPTION

1. RH and Temperature

Sensor

2. Function Button Area

3. LCD Display

FUNCTION BUTTONS

RHT02 RHT05

LCD DISPAY

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Operation

Power on the meter by pressing ON/OFF button. You will see a full

display on the screen (though you might have seen "DP","WB"

shown on the screen, however these icons are only available for

RHT05 model) for one second, now the meter will start measuring

the temperature and humidity and display both readings at the

same time.

Note: Make sure you have rotated the sensor cap for ready to

measure.

AIR -ment temperature and humidity.

The default setting of temperature display can be in oF or oC. You

can press F/C button to change the temperature display

Press MIN/MAX button , MIN appears on

display.

The LCD screen is now showing the minimum

humidity and tem-perature readings in

memory. Press MIN/MAX button again, MAX

will show on the LCD screen. Press MIN/MAX

button once again, it backs to the normal

measurement.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

To clear current MIN and MAX readings from memory, press

and hold RESET button, now the meter reading turns to the

normal mode and data in memory is clear now.

Press the hold button until "HLD" appears in display. The

current reading is now being held and will not change until

Hold function HOLD

function. Hold function can be used for Humidity and

Temperature

Unit will turn itself off after 20 min. (Sleep mode).To override

Auto Power Off function (Non-Sleep Mode), press ON/OFF

,HOLD keys simultaneously before powering on. Now the

display shows "n" on the screen. When "n" appears then

release ON/OFF button. Unit will now be in Non-sleep mode

for long time operation purposes

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

RH Calibration

the models RHT02/RHT05 can be self-calibrated at 33% and 75%

following the procedure below**

1. Turn off the meter, plug the meter probe into 32.8% salt bottle and

ON/OFF+F/C more than one second to turn on the

meter and enter Calibration mode.

2. You will see 3x.x% display on the LCD, after 60 minutes the

3x.x%

saving)

3. MN/MX ey more than

one second to enter 7x.x% calibration.

4. 7x.x%

5. Flashing will stop after 60 minutes, it means the whole calibration

is completed

NOTES:

You can exit calibration

without saving by

ON/OFF

Auto power off is disabled

in calibration mode.

For best accuracy results

the calibration should be

done in an environments

temperature of 23+2°C

If the reading difference is

not within 0.3% after

calibration , it means the

calibration is failed

RH Calibration solution

lookup table ---

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

BATTERY REPLACEMENT

1. Turn off the meter and use a coin to open the battery cover.

2. Put the battery (CR2032) whose

"+" faces out into the battery compartment and place the battery cover back

and lock it with a coin

Troubleshooting Tips

POWER ON BUT NO DISPLAY

- Make sure the time of pressing ON/ OFF

- Check the battery is in place and make sure good contact and correct

polarity.

- Replace a new battery and try again.

- Remove the battery. Press

try again.

DISPLAY DISAPPEARS

- Check whether the low battery indicator is displayed on before display

off , if yes , please replace with a new battery.

- ON/ OFF+HOLD isable Auto

Power Off function for a long time using.

CALIBRATION FAILURE

- Check whether the low battery icon is displayed on before cabliration , if

yes, please replace with a new battery and try again.

- Make sure the good sealing when the meter probe plug into the salt bottle.

- Make sure the free air temperature is within 23+2 oC when calibration.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Specifications

RHT02 RHT05

Air

Temperature

4 to 140°F (

to 60°C)

4 to 140°F (

20 to

60°C)

Accuracy ±1.8°F/1°C ±1.8°F/1°C

Relative

Humidity 0 to 100%RH 0 to 100%RH

Accuracy ±3RH (10 to 95%) ±3RH (10 to 95%)

Wet Bulb calculated

Dew Point calculated

Resolution 0.1°F/°C; 0.1%RH 0.1°F/°C; 0.1%RH

Power 1 CR2032 Battery 1 CR2032 Battery

Dimensions

6.9 x 1.7 x 0.6"

(175 x 42 x

16mm)

6.9 x 1.7 x 0.6" (175

x 42 x 16mm)

Weight 1.9oz (55g) 1.9oz (55g)

Warranty

Triplett / Jewell Instruments extends the following warranty to the original purchaser of

these goods for use. Triplett warrants to the original purchaser for use that the products

sold by it will be free from defects in workmanship and material for a period of (1) one

year from the date of purchase. This warranty does not apply to any of our products

which have been repaired or altered by unauthorized persons in any way or purchased

from unauthorized distributors so as, in our sole judgment, to injure their stability or

reliability, or which have been subject to misuse, abuse, misapplication, negligence,

accident or which have had the serial numbers altered, defaced, or removed.

Accessories, including batteries are not covered by this warranty

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Triplett

Triplett

Triplett CFM400 Manual de usuario

Triplett

Triplett 630-NS Manual de usuario

Triplett

Triplett 9325 Manual de usuario

Triplett

Triplett RHT32 Manual de usuario

Triplett

Triplett PH180 Manual de usuario

Triplett

Triplett AM320-NIST Manual de usuario

Triplett

Triplett LT68-NIST Manual de usuario

Triplett

Triplett TSC-MC1 Manual de usuario

Triplett

Triplett RHT01 Manual de usuario

Triplett

Triplett AM250 Manual de usuario

Triplett

Triplett PR400 Manual de usuario

Triplett

Triplett WireMAster Coax BNC Manual de usuario

Triplett

Triplett GSM350 Manual de usuario

Triplett

Triplett BR500 Manual de usuario

Triplett

Triplett LT68 Manual de usuario

Triplett

Triplett 9200B Manual de usuario

Triplett

Triplett SONICHEK PRO 3550 Manual de usuario

Triplett

Triplett 9200-A Manual de usuario

Triplett

Triplett TA150 Manual de usuario

Triplett

Triplett The Hound 2 Manual de usuario

Triplett

Triplett GSM450 Manual de usuario

Triplett

Triplett WireMaster XR-2 Manual de usuario

Triplett

Triplett ET400 Manual de usuario

Triplett

Triplett RHT05 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario