Trikdis G17F Manual de usuario

GSM communicator G17F

INSTALLATION MANUAL

UAB “TRIKDIS”

Draugystės str. 17,

LT-51229 Kaunas

LITHUANIA

E-mail: info@trikdis.lt

Webpage: www.trikdis.lt

GSM communicator G17F

Contents

SAFETY REQUIREMENTS.................................................................................................................................................3

DESCRIPTION.........................................................................................................................................................4

SPECIFICATIONS ........................................................................................................................................................4

COMMUNICATOR BOARD ............................................................................................................................................5

PURPOSE OF TERMINALS.............................................................................................................................................5

LIGHT INDICATION OF OPERATION.................................................................................................................................5

BEFORE YOU BEGIN....................................................................................................................................................6

CONNECT G17F TO TRIKDISCONFIG .......................................................................................................................6

USING USB CABLE: ...................................................................................................................................................6

REMOTELY:..............................................................................................................................................................6

STATUS BAR DESCRIPTION ...........................................................................................................................................7

SET OPERATION PARAMETERS ..............................................................................................................................7

SYSTEM OPTIONS WINDOW.........................................................................................................................................7

USERS WINDOW .......................................................................................................................................................8

MODULES WINDOW ..................................................................................................................................................8

ZONES WINDOW →ZONES SETTINGS TAB ......................................................................................................................8

ZONES WINDOW →ZONES REPORTING TAB ...................................................................................................................9

PGM WINDOW →OUTPUTS TAB.................................................................................................................................9

PGM WINDOW →REPORTING TAB..............................................................................................................................9

REPORTING WINDOW...............................................................................................................................................10

SYSTEM EVENTS WINDOW →EVENTS TAB....................................................................................................................10

SYSTEM EVENTS WINDOW →REPORTING TAB ...............................................................................................................11

EVENTS LOG WINDOW .............................................................................................................................................11

PHYSICAL INSTALLATION PROCESS ......................................................................................................................12

INSERT SIM CARD INTO THE HOLDER...........................................................................................................................12

MOUNTING ...........................................................................................................................................................12

WIRING DIAGRAMS..................................................................................................................................................12

4.3.1 Wiring to fire control panel.............................................................................................................................................. 12

4.3.2 Input connection .............................................................................................................................................................. 13

4.3.3 Wiring example with iO expanders.................................................................................................................................. 13

REMOTE CONTROL ..............................................................................................................................................14

SMS COMMANDS LIST .............................................................................................................................................14

5.1.1 PGM control with DTMF .................................................................................................................................................. 15

ADD COMMUNICATOR IN PROTEGUS..................................................................................................................15

TEST COMMUNICATOR PERFORMANCE ..............................................................................................................15

MANUAL FIRMWARE UPDATE.............................................................................................................................15

GSM communicator G17F

Safety requirements

The security or fire alarm system should be installed and maintained by qualified personnel.

Prior to installation, please read carefully this manual in order to avoid mistakes that can lead to malfunction or

even damage to the equipment.

Disconnect power supply before making any electrical connections.

Changes, modifications or repairs not authorized by the manufacturer shall void your rights under the warranty.

Please act according to your local rules and do not dispose of your unusable alarm system or its

components with other household waste.

GSM communicator G17F

Description

Communicator G17F can upgrade any fire alarm panel for event signaling via cellular network.

When input is violated, the communicator transmits an event message to Alarm Receiving Centre (ARC).

Communicator can also inform customers about security system events in Protegus apps or with SMS messages.

Features

Specifications

Parameter

Description

GSM modem frequencies

850 / 900 / 1800 / 1900 MHz

3G modem frequencies

800 / 850 / 900 / 1900 / 2100 MHz

LTE modem frequencies

700 / 800 / 900 / 1800 / 2100 / 2600 MHz

Power supply voltage

9-32 VDC

Current consumption

50 mA (standby)

Up to 200 mA (transmitting)

Transmission protocols

TRK

Communication with ARC

TCP/IP or UDP/IP, SMS

Memory

Up to 60 messages

Inputs and outputs

3 inputs,

3 double purpose contacts for setting either input or

output functionality

Selectable type inputs: NC, NO, EOL (10kΩ)

Event log memory

Up to 1000 events

Event transmission

Contact ID codes

Parameter configuration

Locally via USB port or remotely

Operating environment

Temperature from -10 °C to 50 °C, relative humidity –

up to 80% at +20 °C

Communicator dimensions

65 x 77 x 25 mm

Weight

0.08 kg

Communications

One main communication channel

Main channel has two back-up channels

Connection control with ARC

Event messages are transmitted in Contact ID codes

Event reporting to Protegus apps

Event reporting via SMS messages up to eight users in user

friendly SMS messages



Inputs and outputs

RS485 connection

3 selectable type inputs: NC, NO, EOL (10kΩ), 3 double purpose screw terminals for setting either input

or output functionality

Using iO series expanders it is possible to expand inputs number up to 12

Outputs can be controlled via:

oMobile/Web Protegus application or

oSMS/Call

Configuration

Quick and easy installation

Remote configuration and firmware updates

GSM communicator G17F

Communicator board

Purpose of terminals

Terminal

Description

+DC

+9 - +32 VDC power supply

-DC

Common (negative)

A RS485

RS-485 connection positive contact (enables connect iO and iO-WL expanders)

B RS485

RS-485 connection negative contact (enables connect iO and iO-WL expanders)

COM

Common (negative)

X IN

3 selectable type inputs

X I/O

Double purpose terminal: Xnd selectable type input or Xst open-collector (OC)

output (pre-set as NO type input by default)

Light indication of operation

Indicator

Light Status

Description

Network

Off

No connection with GSM network

Green solid with

yellow blinking

Communicator is connected to GSM network.

Number of flashes (from 0 to 5) shows signal strength. Sufficient

signal strength is level 2 (two yellow flashes)

Data

Green solid

Sending message

Yellow solid

Unsent event messages is presented in buffer

Power

Green blinking

Power supply is on with sufficient voltage and microcontroller

is operational

Yellow blinking

Power supply voltage is insufficient (≤22V), microcontroller is

operational

Green and

yellow blinking

(Configuration mode) Communicator is ready for configuration

Trouble

If red LED is blinking:

1 blink

No SIM card

2 blinks

SIM card PIN code problem (incorrect PIN code)

3 blinks

Can not connect to GSM network

4 blinks

Problem with primary channel

5 blinks

Problem with backup channel

6 blinks

Set Module`s internal clock

7 blinks

Power supply voltage is low

9 blinks

RS485 module malfunction

1) GSM antenna SMA connector

Light indicators

Frontal case opening slot

USB Mini-B port for

communicator programming

Nano SIM card slot

Terminal for external

connections

GSM communicator G17F

Before you begin

Before you begin, make sure that you have the necessary:

1) USB cable (Mini-B type) for configuration.

2) Cable with at least 4 wires for connecting communicator to control panel.

3) Flat-head screwdriver.

4) Sufficient gain GSM antenna.

5) Nano SIM card registered to GSM network.

6) Particular security control panel`s installation manual.

Order them separately from your local distributor.

Connect G17F to TrikdisConfig

Communicator can be configured using TrikdisConfig software for MS Windows OS via USB cable or remotely.

1) Download TrikdisConfig from www.trikdis.com (in search field type TrikdisConfig), and install it.

2) Connect the communicator to TrikdisConfig:

Using USB cable:

Carefully open the casing with flat-head screwdriver as shown below:

a) Insert screwdriver into the slot (red arrow). (it is unnecessary to put in screwdriver`s head to the bottom of

the casing).

b) Hold the casing`s bottom part with one hand and gently push screwdriver to the left side.

c) Plug in USB cable. Run the configuration software TrikdisConfig. The software will automatically recognize

connected communicator and will open a window for communicator configuration.

Remotely:

a) Run configuration program TrikdisConfig.

b) In section, Remote access, field Unique ID enter IMEI address of communicator (IMEI address is provided on

the product package).

c) (Optional) in the field System Name enter the desired name to the communicator. Press Configure.

3) Click Read [F4] to read the communicators parameters and enter the Administrator or Installer code in pop-up

window. For the program to remember the code, check the box next to Remember password.

Note: If administrator code is set as default (123456), it is not required to enter it and the request window will not

appear.

To set up the communicator from a saved configuration file, click Open [F8] and browse your computer to find the

configuration file.

IMPORTANT: To use remote configuration function, Protegus service must be enabled (See chapter: 3.8

Reporting window).

To configure the communicator remotely, insert a registered SIM card with the PIN code request function disabled.

GSM communicator G17F

Status bar description

Once the communicator parameters are read, the status bar will display information about the communicator.

Status bar

Name

Description

IMEI/Unique ID

IMEI number of the communicator

Status

Action status

Device

Communicator type (shows G17F)

Serial number

Bootloader version

Firmware version

Hardware version

State

Connection status

Admin

Access level (shows up after access code is confirmed)

Set operation parameters

System Options window

General

Write an appropriate Object number (4 symbols hexadecimal number, 0-9, A-F).

Object name will be send with SMS messages (max 20 characters, can be letters and numbers).

Test period: periodic test messages will be sent according to a time interval set in this section.

Specify Time synchronization (Communicator will use time according to ARC or GSM modem)

Clear Events after reset ––deletes all unsent events in communicator`s memory after reset.

SMS language –set required language to use specific characters of language in SMS messages

If the communicator registers that the same event messages were triggered, it can suspend those messages and do

not send it to users. Set Suspend event reporting when X same events per XX s.

Restore event reporting after –set time after which event reporting suspension will be canceled. Time limit –999

min.

SIM card

Enter SIM card PIN.

Enter APN –network name.

If it is required, enter network name and password in fields Login, Password.

Access codes

Administrator code –(default code 123456) allows full access to the configuration (Administrator code must be six

symbols in length, and contain digits or Latin characters only).

Protegus Cloud access Code –(default code 123456), for more safety change it to six symbol code.

SMS password –(default code 123456) password for remote control and programming via SMS messages, (six-digit

SMS password).

IMPORTANT: Ensure the SIM card is working and registered on GSM network before using it.

If GPRS communication is required, ensure mobile data service is enabled. For information on how to enable this

service, please contact your network service provider.

GSM communicator G17F

Users window

User permissions

ID –user identification number

Name –username. In the reports will be visible who has controlled the alarm system and how.

Tel number –user phone number, from which the alarm system will be remotely controlled. Numbers must be

entered with international code.

PGM –when selected, allows control PGM outputs with DTMF tones.

ACK –when selected, communicator will send answer messages after receiving command from user.

FWD –when selected, redirects SMS messages, which are not related to communicator’s work (SIM card balance,

random messages).

SMS answer texts

Answers to the SMS commands can be customized in the SMS answer text field.

Modules window

RS485 modules

ID –module sequence number.

Type –select module (module iO, iO-WL) from modules list.

Serial –mandatory serial six-digit number (set previous step).

Name –give name to the module.

Firmware version –version will be shown when G17F is in working mode and detects module.

Zones window →Zones settings tab

Zones settings

ID –zone number.

Input –identifies input type (internal or external device input) and assigns it to zone.

Definition - if the zone is violated at any time, reports will be immediately generated and sent.

Type –input connection type: NC –normally closed, NO –normally open, EOL –end of line with 10 kΩ resistor.

ARC –enable event reporting to ARC.

GSM communicator G17F

CID Code –zone Contact ID event code (will be set automatically when the zone function is selected).

Zones window → Zones reporting tab

Zones→Zones reporting

This window will be shown only if at least one User is described in the 3.2 Users window.

Zn –zone number with event identification mark.

Zone SMS text –text sent to users in SMS message.

SMS/Call –check how users will be informed about the event, with SMS or/and Call.

PGM window → Outputs tab

PGM → Outputs tab

PGM No –specifies PGM.

PGM output –assign communicator`s or external device`s outputs to PGM.

Output definition –Selection output operation mode.

oRemote control –remote control of peripheral devices (turn on/ turn off).

Pulse Time, s –when dial control is used, pulse duration must be indicated. Duration can be from 0 to 9999 sec.

PGM window → Reporting tab

PGM → Reporting tab

This window will be shown only if at least one User is described in the 3.2 Users window.

PGM –indicates PGM ID and report type (E –Event and R –Restore).

Output SMS text –SMS text will be sent when Output reacts.

User SMS/Call –select how and which users will be informed.

GSM communicator G17F

Reporting window

Primary and Backup channels

Select communication Protocol –TCP/IP, UPD/IP, SMS, Protegus.

oIf the TCP/IP or UDP/IP protocol will be used –enter ARC Domain or IP, Port andEncryption key. Choose

the Backup protocol, and enter required data.

oIf the SMS reporting will be used –enter the receivers SMS phone number (phone numbers must contain

country code, for example +370xxxxxxxx) and Encryption key. In this communication protocol, both backup

channels are disabled.

oIf the Protegus protocol will be used –all settings in the ARC reporting window are set automatically, events

will be reported to Protegus apps (how to set communicator with Protegus apps, see in Add communicator

in Protegus.

The Backup 2 will be enabled when the Backup will be set to operate in the Protocol TCP/IP or UDP/IP. SMS to

receiver at ARC will be sent:

oas soon as a communicator has started working for the first time and;

oafter fail of TCP or UDP communication via both the primary and the first’s backup channel.

Settings

Return to primary after - used if primary communication channel and backup channel to the monitoring station are

selected. Enter the time interval value after which communicator will try to restore the communication via the main

channel.

PING time –the communicator will send to receiver via GPRS communication test signals PING in a set time

period.

SMS PING time –the communicator will send SMS PING messages to receiver to test communication in a set

time period.

Backup reporting after attempts - used if primary communication channel (GPRS_TCP or GPRS_UDP) and

backup channel are selected. Enter the number of times communicator will try to send a message via the primary

channel and upon failure will send messages using the backup communication channel.

DNS1 and DNS2 –we recommending not changing the DNS server addresses.

System events window → Events tab

Event summary → Events

ID –List number of the event.

Event name –the name of the event.

Enable –enable the generation of the event.

Otros manuales para G17F

Tabla de contenidos

Otros manuales de Teléfono móvil de Trikdis

Trikdis

Trikdis G10T Manual de usuario

Trikdis

Trikdis G16T Manual de usuario

Trikdis

Trikdis G10 Manual de usuario

Trikdis

Trikdis E10T Manual de usuario

Trikdis

Trikdis E14 Manual de usuario

Trikdis

Trikdis G10D Manual de usuario

Trikdis

Trikdis G17F Manual de usuario

Trikdis

Trikdis G10 Manual de usuario

Trikdis

Trikdis Ethernet E16 Manual de usuario

Trikdis

Trikdis G09 Manual de usuario

Trikdis

Trikdis G16T 3 Series Manual de usuario

Trikdis

Trikdis GET Manual de usuario

Trikdis

Trikdis G16 Manual de usuario

Trikdis

Trikdis FireCom Manual de usuario

Trikdis

Trikdis G16 Manual de usuario

Trikdis

Trikdis G16T Manual de usuario

Trikdis

Trikdis E10Tv2 Manual de usuario

Trikdis

Trikdis G16T Manual de usuario

Trikdis

Trikdis E16T Manual de usuario

Manuales populares de Teléfono móvil de otras marcas

Zte

Zte BLADE A520 Manual de usuario

Nokia

Nokia Lumia 620 Manual de usuario

Blackbe;rry

Blackbe;rry KEYone Manual de usuario

Bea-fon

Bea-fon X5 Premium Manual de usuario

Blackbe;rry

Blackbe;rry 8707 Series Manual de usuario

Blackbe;rry

Blackbe;rry Storm Instrucciones de funcionamiento

LG LM-X420QN Manual de usuario

LifeWatch

LifeWatch V Manual de usuario

Bea-fon

Bea-fon SILVER LINE SL860 Manual de usuario

IKI Mobile

IKI Mobile KF4.5i Manual de usuario

Hitech

Hitech HT-850 Manual de usuario

Yezz

Yezz Fashion F10 Manual de usuario

Point Mobile

Point Mobile PM60 Manual de usuario

Blackbe;rry

Blackbe;rry Q10 Manual de usuario

Blackbe;rry

Blackbe;rry Bold 9900 Manual de usuario

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Manual de usuario

LG LM-K420EMW Manual de usuario

ISAFE MOBILE

ISAFE MOBILE IS655.2 Manual de usuario