Trikdis E10Tv2 Manual de usuario

Ethernet communicator E10Tv2

USER MANUAL

UAB “TRIKDIS”

Draugystės str. 17,

LT-51229 Kaunas

LITHUANIA

E-mail: info@trikdis.lt

Webpage: www.trikdis.lt

Ethernet communicator E10Tv2

Contents

DESCRIPTION ................................................................................................................................... 3

1.1 SAFETY REQUIREMENTS ................................................................................................................................ 4

1.2 TECHNICAL PARAMETERS .............................................................................................................................. 4

1.3 PACKAGE CONTENTS .................................................................................................................................... 4

1.4 COMMUNICATOR STRUCTURE ........................................................................................................................ 4

1.5TERMINAL BLOCK DESCRIPTION....................................................................................................................... 5

1.6 LIGHT INDICATION........................................................................................................................................ 5

INSTALLATION PROCESS ................................................................................................................... 5

2.1 PROGRAM SECURITY CONTROL PANEL .............................................................................................................. 5

CONFIGURATION AND OPERATION................................................................................................... 6

3.1 MAIN STEPS TO CONFIGURE COMMUNICATOR VIA USB CABLE ........................................................................... 6

3.2 MAIN STEPS TO CONFIGURE COMMUNICATOR REMOTELY................................................................................. 6

3.3 TRIKDISCONFIG BASICS ................................................................................................................................. 7

3.3.1 Main action buttons ....................................................................................................................... 7

3.3.2 Status bar ....................................................................................................................................... 7

3.3.3 Restore default settings.................................................................................................................. 7

3.4 SYSTEM SETTINGS ........................................................................................................................................ 8

3.5 REPORTING →ALARM RECEIVING CENTRE (ARC) REPORTING ............................................................................. 9

3.6 REPORTING →PROTEGUS SERVICE ................................................................................................................. 9

3.7 EVENT SUMMARY ...................................................................................................................................... 10

3.8 FIRMWARE UPDATE.................................................................................................................................... 10

REMOTE CONTROL ......................................................................................................................... 11

WIRING.......................................................................................................................................... 12

5.1 WIRING DIAGRAM..................................................................................................................................... 12

5.2 INPUT CONNECTION ................................................................................................................................... 12

PERFORMANCE TEST ...................................................................................................................... 12

Ethernet communicator E10Tv2

Description

Ethernet modules E10T are designed to transmit messages from security control panel at a secured object to a

monitoring station through internet connection.

The module E10T is applied for sending of DTMF tone messages coded in Contact ID protocol of security panel

telephone communicator.

Features

Connection

Connection to control panels via:

TLC terminal connection

Communications

Communication modes:

Ethernet

Communicator transfers all messages from control

panel in Contact ID codes

Simultaneous event reporting to Protegus

Mobile/Web application, allowing user to remotely

monitor and control its alarm system

Messages in TCP/IP or UDP/IP protocol are sent to

ARC

In case of lost connection with the main channel,

switches automatically to backup channel

Input

1 input, type: NC, NO, EOL = 2.2 kΩ

Configuration

Quick and easy configuration and firmware updates

Two access levels for setting of operating parameters

Ethernet communicator E10Tv2

1.1 Safety Requirements

The security alarm system should be installed and maintained by qualified personnel.

Prior to installation, please read carefully this manual in order to avoid mistakes that can lead to malfunction

or even damage to the equipment.

Disconnect power before making any electrical connections.

Changes, modifications or repairs not authorized by the manufacturer shall void your rights under the

warranty.

Please act according to your local rules and do not dispose of your unusable alarm system or its

components with other household waste.

1.2 Technical Parameters

Parameter

Description

Power supply voltage

DC 12,6 ± 3 V

Current consumption

120 mA (stand-by),

Up to 250 mA (transmitting)

Ethernet connection

IEEE802.3, 10 Base-T, RJ45 socket

Data pack content

Contact ID format codes

Memory

Up to 100 messages

Input

1, NC/NO/EOL-2,2 kΩ type

Operating environment

From -10 °C to 50 °C, with relative air humidity 80% when

+20 °C

Dimensions

65 x 79 x 25 mm

Power supply voltage

DC 12,6 ± 3 V

1.3 Package Contents

Module E10Tv2

1 pc.

User manual

1 pc.

Two-sided adhesive tape (10 cm)

1 pc.

1.4 Communicator structure

Ethernet connection RJ45 socket

Light indicators

USB Mini-B port for communicator

programming

Terminal for external connections

Note: USB cable (Mini-B type) for

programming the communicator

via USB is not included.

Ethernet communicator E10Tv2

1.5 Terminal block description

Contact

Description

+12V power supply terminal

COM

Common ground terminal

T-CP

For connecting to the security control panel Tip terminal

R-CP

For connecting to the security control panel Ring terminal

T-TL

For connecting a telephone landline

R-TL

For connecting a telephone landline

IN1

1st input terminal for connection of external circuits (type NC)

COM

Common ground terminal

MCI

Provided for future use

1.6 Light indication

LED

Operation

Description

“Network” displays the status of

connection to the Internet

Green ON

Module is connected to the Internet

Yellow ON

TCP/IP session is open

“Data” displays data transfer

Green ON

Unsent messages present

Red ON

Messages cannot be sent

Green flashing

Messages are being received from the

control panel

“Power” displays power supply

status and the functioning of the

microprocessor

Green flashing

Power supply is sufficient

Yellow flashing

Power supply is not sufficient (≤11,5 V)

Installation process

1) Configure communicator parameters before installation. For communicator configuration please refer to

3. Configuration and operation.

2) Following provided schematics connect the control panel, sensors and output connections (refer to 5

Wiring).

3) Connect LAN cable.

4) Connect a DC power supply.

5) Turn on the power supply.

6) Perform system test (refer to 6 Performance test).

2.1 Program security control panel

Use programming manual of particular security control panel and set operation parameters of telephone

communicator as following:

1) Enable the PSTN dialer of the panel.

2) Select DTMF mode.

3) Select Contact ID communication format.

4) Enter a telephone number 1234 for dialing, if communicator is connected to the telephone landline (you

can use any number not shorter than 2-digits).

5) Enter a 4-digit account number in the panel.

Ethernet communicator E10Tv2

Configuration and operation

Communicator can be configured using TrikdisConfig software via USB cable or remotely. The software is

available on www.trikdis.com and operates in MS Windows OS.

3.1 Main steps to configure communicator via USB CABLE

1) Download and install TrikdisConfig.

2) Connect the communicator to the computer using USB cable.

3) Run the configuration software TrikdisConfig. The software will automatically recognise the connected

device and will open a window for communicator configuration.

4) Click Read [F4] to read the communicators parameters.

5) Set required parameters in System settings directory.

6) In the directory Reporting: enter the parameters needed for reporting to an alarm receiving centre (ARC)

and Protegus service

7) In directory Event summary test and internal event CID can be customized.

8) After all parameters are set click Write [F5], to write parameters from TrikdisConfig program to

communicator.

3.2 Main steps to configure communicator REMOTELY

Make sure that the communicator is connected to supply source and is operating.

1) Start TrikdisConfig software.

2) At the field Remote access, in the field Unique ID enter the MAC address. (MAC address is provided

on the product package).

3) (Optional) In the field System Name enter the desired name to the module.

4) Press Configure.

5) Click Read [F4] to read the communicators parameters.

6) Set required parameters in System settings directory.

7) In the directory Reporting: enter the parameters needed for reporting to an alarm receiving centre

(ARC) and Protegus service

8) In directory Event summary test and internal event CID can be customized.

9) After all parameters are set click Write [F5], to write parameters from TrikdisConfig program to

communicator.

Note: Below you can find detailed information how to set required parameters. All described

directories below are following sequence of steps from this chapter.

Figure 1. Remote access

Note: Below you can find detailed information how to set required parameters. All described

directories below are following sequence of steps from this chapter.

Ethernet communicator E10Tv2

3.3 TrikdisConfig Basics

3.3.1 Main action buttons

1) To read the communicator parameters, click Read [F4] and enter

the Administrator or Installer code in the pop-up window. In order

for the program to remember the code, check the box next to

Remember password.

2) To write new parameters to the communicator, click Write [F5].

3) To create a configuration file which contains current parameters, click Save [F9].

4) To open a configuration file, click Open [F8].

5) Button Disconnect:

Click Disconnect to disconnect from access level (installer or admin) while communicator is connected

via USB cable to a computer.

If a configuration is done via USB cable, unplug the USB cable, click Disconnect to go back to the first

window.

6) To read about communicator’s functionality and how to configure specific parameters, click Help [F1] and

from the program menu select the section. This will open an appropriate chapter from the user manual.

3.3.2 Status bar

Once the communicator parameters are read, the status bar will display information about the device.

Status bar

Name

Description

Unique ID

MAC number of the device

Status

Action status

Device

Device type

Serial number

Bootloader version

Firmware version

Hardware version

State

Connection status

Admin

Access level (shows up after access code is confirmed)

3.3.3 Restore default settings

To restore default settings of the communicator, press the Restore button under the Default settings in the

bottom of the left corner of the configuration window.

Action buttons

Figure 2. Action buttons

Status bar

Figure 3. Status bar

Note: if administrator code is set

as default (123456), it is not

required to enter it and the

request window will not appear.

Ethernet communicator E10Tv2

3.4 System settings

Settings →General:

•Write an appropriate Account number (4 symbols hexadecimal number).

•Select Use security panel account ID checkbox if messages from the security control panel must contain

its identification number.

•Test period: periodic test messages will be sent according to a time interval set in this section

Settings → Ethernet settings

•Enter Internal MAC.

•When Use DHCP checkbox is selected, module registration in the network will be done automatically.

oIf automatic registration is unsuccessful, enter Internal IP address, subnet Mask and Gateway address

manually. E10Tv2 supports DNS service;

Settings → Access

•Administrator code - allows full access to the configuration.

•Installer code - allows access to the configuration, limited by administrator. Administrator can allow

installer to change:

oAccount number;

oReporting;

oEthernet settings;

oEvent summary.

Figure 4. System setting window

Ethernet communicator E10Tv2

3.5 Reporting → Alarm Receiving Centre (ARC) reporting

Reporting → Primary and backup settings

To have connection with Primary and Backup mark checkboxes Enable.

Fill in fields for Remote Host,Remote Port.

Choose reporting protocol TCP or UDP.

Enable PING Time and set time between signals in seconds.

Enter Encryption key (six-symbol hexadecimal number).

3.6 Reporting → Protegus service

Protegus service allows users to remotely monitor and control the communicator.

Protegus service allows simultaneous transmission of data to the Protegus server for Mobile/Web application.

For more information about PROTEGUS service visit www.protegus.eu.

Enable cloud service at Reporting → PROTEGUS service tab.

Enter Service code (default code –123456), for more safety change it to 6-symbol authentication code.

This code is used, when adding new system to the application.

Figure 5. ARC Reporting window

Figure 6. Protegus service window

Ethernet communicator E10Tv2

3.7 Event Summary

Input description

•To describe input fill in fields: Partition, Contact-ID, Zone No.;

•Select type of input (NO, NC, EOL);

•Enable: report when event occurs (Alarm), report when input line will restore (Restore).

Internal events description

•To describe internal events select event type (Event or Restore), enter Contact-ID, Partitions

and Zone.

3.8 Firmware update

The communicator firmware can be updated or changed manually. After an update, all the previous

communicator parameters will remain the same.

When writing firmware manually, it can be changed to a newer or older version. To update:

1) Run TrikdisConfig.

2) Connect the communicator via USB cable to the computer or connect to the communicator remotely.

If newer firmware version exists, the software will offer to download the newer firmware version file.

3) Select the menu branch Firmware.

Note: If there is an installed antivirus software on your computer, it might block automatic firmware update

option. In this case, you must reconfigure your antivirus software.

Figure 8. Firmware update window

Figure 7. Event Summary window

Tabla de contenidos

Otros manuales de Teléfono móvil de Trikdis

Trikdis

Trikdis GET Manual de usuario

Trikdis

Trikdis G16 Manual de usuario

Trikdis

Trikdis FireCom Manual de usuario

Trikdis

Trikdis G16T 3 Series Manual de usuario

Trikdis

Trikdis G16T Manual de usuario

Trikdis

Trikdis E10T Manual de usuario

Trikdis

Trikdis G17F Manual de usuario

Trikdis

Trikdis G10T Manual de usuario

Trikdis

Trikdis G16T Manual de usuario

Trikdis

Trikdis Ethernet E16 Manual de usuario

Trikdis

Trikdis G17F Manual de usuario

Trikdis

Trikdis G10D Manual de usuario

Trikdis

Trikdis E16T Manual de usuario

Trikdis

Trikdis G10 Manual de usuario

Trikdis

Trikdis E14 Manual de usuario

Trikdis

Trikdis G10 Manual de usuario

Trikdis

Trikdis G16 Manual de usuario

Trikdis

Trikdis G09 Manual de usuario

Trikdis

Trikdis G16T Manual de usuario

Manuales populares de Teléfono móvil de otras marcas

Zte

Zte BLADE A520 Manual de usuario

Nokia

Nokia Lumia 620 Manual de usuario

Blackbe;rry

Blackbe;rry KEYone Manual de usuario

Bea-fon

Bea-fon X5 Premium Manual de usuario

Blackbe;rry

Blackbe;rry 8707 Series Manual de usuario

Blackbe;rry

Blackbe;rry Storm Instrucciones de funcionamiento

LG LM-X420QN Manual de usuario

LifeWatch

LifeWatch V Manual de usuario

Bea-fon

Bea-fon SILVER LINE SL860 Manual de usuario

IKI Mobile

IKI Mobile KF4.5i Manual de usuario

Hitech

Hitech HT-850 Manual de usuario

Yezz

Yezz Fashion F10 Manual de usuario

Point Mobile

Point Mobile PM60 Manual de usuario

Blackbe;rry

Blackbe;rry Q10 Manual de usuario

Blackbe;rry

Blackbe;rry Bold 9900 Manual de usuario

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Manual de usuario

LG LM-K420EMW Manual de usuario

ISAFE MOBILE

ISAFE MOBILE IS655.2 Manual de usuario