Trikdis G16T Manual de usuario

www.trikdis.lt UAB Trikdis Draugystės str. 17, LT-51229 Kaunas, Lithuania +370 37 408 040 info@trikdis.lt

Cellular communicator G16T

Installation manual

January, 2021

 
www.trikdis.com 2January, 2021 
 
Cellular communicator G16T_LTE-M 
 
 
Contents 
 DESCRIPTION................................................................................................................................................................. 5 
1 COMMUNICATOR MODEL TYPES ............................................................................................................................................5
2 SPECIFICATIONS .................................................................................................................................................................6 
3 COMMUNICATOR ELEMENTS.................................................................................................................................................6
4 PURPOSE OF TERMINALS......................................................................................................................................................6
5 LED INDICATION OF OPERATION............................................................................................................................................7
6 STRUCTURAL SCHEMATIC WITH G16T USAGE...........................................................................................................................8
 QUICK CONFIGURATION WITH TRIKDISCONFIG SOFTWARE .......................................................................................... 8 
1 SETTINGS FOR CONNECTION WITH PROTEGUS APP.....................................................................................................................9
2 SETTINGS FOR CONNECTION WITH CENTRAL MONITORING STATION...........................................................................................10 
 INSTALLATION AND WIRING ....................................................................................................................................... 11 
1 INSTALLATION PROCESS .....................................................................................................................................................11 
2 SCHEMATICS FOR WIRING THE COMMUNICATOR TO THE CONTROL PANEL ....................................................................................12 
3 SCHEMATICS FOR CONNECTING TO PANEL KEYSWITCH ZONE ......................................................................................................12 
4 SCHEMATICS FOR WIRING INPUTS ........................................................................................................................................12 
5 SCHEMATICS FOR WIRING A RELAY .......................................................................................................................................13 
6 SCHEMATICS FOR CONNECTING IO-8 EXPANSION MODULE........................................................................................................13 
7 SCHEMATIC FOR CONNECTING THE W485 WIFI MODULE.........................................................................................................14 
8 SCHEMATIC FOR CONNECTING THE E485 „ETHERNET“MODULE................................................................................................14 
9 TURN ON THE COMMUNICATOR ..........................................................................................................................................14 
 PROGRAMMING THE CONTROL PANEL ....................................................................................................................... 14 
1 PROGRAMMING HONEYWELL VISTA LANDLINE DIALER .............................................................................................................15 
2 SPECIAL SETTINGS FOR HONEYWELL VISTA 48 PANEL...............................................................................................................15 
 REMOTE CONTROL ...................................................................................................................................................... 15 
1 ADDING THE SECURITY SYSTEM TO PROTEGUS APP ..................................................................................................................15 
2 ADDITIONAL SETTINGS TO ARM/DISARM THE ALARM SYSTEM USING CONTROL PANEL’S KEYSWITCH ZONE...........................................16 
3 ARMING/DISARMING THE ALARM SYSTEM WITH PROTEGUS ......................................................................................................17 
 TRIKDISCONFIG WINDOW DESCRIPTION ..................................................................................................................... 18 
1 TRIKDISCONFIG STATUS BAR DESCRIPTION .............................................................................................................................18 
2 “SYSTEM SETTINGS”WINDOW ............................................................................................................................................18 
3 “CMS REPORTING”WINDOW.............................................................................................................................................19 
4 “USER REPORTING”WINDOW.............................................................................................................................................21 
5 “SIM CARD”WINDOW......................................................................................................................................................21 
6 „IN/OUT“ WINDOW........................................................................................................................................................22 
7 “RS485 MODULES”WINDOW ............................................................................................................................................22 
8 “EVENT SUMMARY”WINDOW ............................................................................................................................................25 
9 RESTORE DEFAULT SETTINGS...............................................................................................................................................25 
 REMOTE CONFIGURATION .......................................................................................................................................... 25 
 TEST COMMUNICATOR PERFORMANCE ...................................................................................................................... 26 
 MANUAL FIRMWARE UPDATE..................................................................................................................................... 26 
 
 
 

www.trikdis.com 3January, 2021

Cellular communicator G16T_LTE-M

Safety requirements

The communicator must be installed and maintained by qualified personnel.

Before installation, please read this manual carefully to avoid mistakes that may cause malfunction or even damage to the

equipment.

Changes, modifications or repairs not authorized by the manufacturer will void your rights under the warranty.

This unit should be serviced by a qualified technician once a year.

Do not use the device with medical devices or where it may interfere with other devices and cause any potential danger.

Do not expose the device to high humidity, chemical environment or mechanical impact.

Clean the device with a dry cloth. Do not clean it with chemicals, detergents.

Do not use the device in a hazardous environment. Do not store or install the device in overheated, dusty, wet, or overcooled

locations.

Keep the device dry. Any liquid, ie rain, moisture, can destroy or damage the internal circuits.

The device is mounted in areas with limited access. Any system repair should only be done by qualified, safety-conscious

personnel. Do not disassemble or reinstall the device. Do not try to repair it yourself.

The mains power must be disconnected before any installation or adjustment work state. Installation or maintenance of the

device should not be performed during stormy conditions.

Blown fuses or any other component of the device must not be replaced by the user.

Handle with care. Do not vibrate or shake it violently.

Act in accordance with local regulations and do not dispose of your old alarm system or its components with other

household waste.

Agency Listings and Approvals

These listings and approvals apply only to the module specified in this document, In some cases, listing may be in process.

•FCC Statement.

This equipment complies with FCC rules Part 15, FCC registration No. XMR201707BG96 and operation is subject to the

following conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received.

•UL standards –Pending.

Limited Liability

The user agrees that despite the Device could reduce the risk of fire, theft, burglary or other dangers, it does not guarantee

against such events. Trikdis LTD will not take any responsibility regarding personal, property or revenue loss while using Device

responsibility according to local laws does not exceed the value of the purchased system. TRIKDIS LTD is not affiliated with

GSM operators providing cellular services, therefore is not responsible for network services, coverage or its operation.

Manufacturer Warranty

The communicator is given a 24-month warranty effective from the date of sale-purchase. For the duration of the warranty

period, free repairs are guaranteed for faults caused by the manufacturer.

The warranty is valid if the communicator was installed by qualified personnel following the instructions in this document

and the applicable regulations for installing electrical equipment and operated following the instructions in this document

and the applicable regulations for safe operation of electrical equipment.

The communicator must be submitted for repairs in the manufacturer‘s packaging along with a defect report stating the

nature of the malfunction.

Once the warranty has expired, the communicator‘s technical maintenance and repairs are performed at the buyer‘s expense.

The warranty can be terminated prematurely if:

•Unauthorized personnel repaired or tried to repair the communicator;

www.trikdis.com 4January, 2021

Cellular communicator G16T_LTE-M

•The communicator was used for anything other than its intended purpose;

•If there is damage during transportation or handling;

•If the communicator has been damaged by removing the SIM card;

•In case of accidental spills or customer applied cleaners on the communicator;

•The communicator was stored and (or) installed in unsuitable premises that had incompatible climate conditions or an

aggressive chemical environment;

•The communicator was mechanically broken and (or) intentionally damaged;

•The communicator was damaged by force majeure circumstances (lightning discharge etc.).

The manufacturer is not responsible for:

•the communicator‘s malfunctions if the communicator is installed or used not according to its manual.

•the communicator‘s malfunctions if the cause is a malfunction or loss of GSM/GPRS/Internet connectivity or malfunctions

in the operator‘s network.

•restrictions or termination of GSM/GPRS/Internet connectivity services to the communicator‘s buyer or user, and shall

not compensate the communicator‘s buyer or user for any property or non-property damages suffered from this.

•restrictions or termination of electricity supply service to the communicator‘s buyer or user, and shall not compensate

the communicator‘s buyer or user for any property or non-property damages suffered from this.

•robbery, fire of the premises or any other losses suffered by the communicator‘s buyer or user, and shall not

compensate the communicator‘s buyer or user for any property or non-property damages suffered from these events.

www.trikdis.com 5January, 2021

Cellular communicator G16T_LTE-M

Description

Cellular communicator G16T can be connected to any alarm panel that has a landline dialer and supports dialing in Contact ID

or SIA or 4+2 protocol with DTMF tones.

The communicator can transmit full event information to the security company’s monitoring station receiver.

The communicator works with the Protegus app (only when Contact ID is used). Users can control their alarm system remotely

and receive notifications about events. Protegus app works with all security alarm panels to which the communicator is

connected to, regardless of manufacturer. Communicator can transmit event notifications to the Central Monitoring Station and

work with Protegus simultaneously.

Features

Connects to panel’s landline dialer:

•Communicator can be connected to control panel’s landline dialer with 2

wires.

Sends events to monitoring station receiver:

•Sends events to TRIKDIS software or hardware receivers that work with any

monitoring software.

•Can send event messages to SIA DC-09 receivers.

•Connection supervision by polling to IP receiver every 30 seconds (or by user

defined period).

•Backup channel, that will be used if connection with the primary channel is

lost.

•With parallel communication channels events can be sent to two receivers at

same time.

•When Protegus service is enabled, events are first delivered to CMS, and only

then are sent to app users.

Works with Protegus app:

•“Push” and special sound notifications informing about events.

•Remote system Arm/Disarm.

•Remote control of connected devices (lights, gates, ventilation systems, heating, sprinklers, etc.).

•Different user rights for administrator, installer and user.

Notifies users:

•Users can be notified about events with Protegus app.

Controllable outputs and inputs:

•3 double I/O terminals that can be set either as input (IN) or controllable output (OUT) terminals.

•Output are controlled with the Protegus app.

•Add additional inputs and controllable outputs with wired iO-8 expanders.

Quick setup:

•Settings can be saved to file and quickly written to other communicators.

•Two access levels for configuring the device for CMS administrator and for installer.

•Remote configuration and firmware updates.

This manual applies to these communicator model:

•G16T –version 6, 1 SIM, LTE CatM1.

www.trikdis.com 6January, 2021

Cellular communicator G16T_LTE-M

Parameter

Description

Connects to panel

Landline dialer (TIP RING terminals)

Dual purpose terminals

[IN/OUT]

3, can be set as either NC; NO; NC/EOL; NO/EOL; NC/DEOL; NO/DEOL (10 kΩ) type inputs or

open collector (OC) type outputs with current up to 0,15 A, 30 VDC max.

Expandable with iO-8 expanders.

Communicator modem

frequencies

Cat M1/Cat NB1: LTE FDD: B1/B2/B3/B4/B5/B8/B12/B13B18/B19/B20/B25/B28

LTE TDD: B39 (only Cat M1)

Power supply voltage

12-30 V DC

Current consumption

60-100 mA (on standby)

Up to 250 mA (while sending data)

Transmission protocols

TRK8, DC-09_2007, DC-09_2012

Message encryption

AES 128

Changing settings

With TrikdisConfig computer program remotely or locally via USB Mini-B port

Operating environment

Temperature from 14°F (-10°C) to 122°F (+50°C), relative humidity - up to 80% at +68°F

(+20°C)

Communicator dimensions

3,6x2,6x1,0 in (92 x 65 x 26 mm)

Weight

2.8 oz (80 g)

1. Cellular antenna SMA

connector.

2. Light indicators.

3. Frontal case opening slot.

4. Terminal for external

connections.

5. USB Mini-B port for

communicator programming.

6. SIM card slot.

Terminal

Description

+DC

Power terminal (12-30 V DC positive)

-DC

Power terminal (12-30 V DC negative)

TIP

Terminal to connect with security control panel TIP terminal

RING

Terminal to connect with security control panel RING terminal

I/O 1

Input/Output terminal (default setting –OFF)

www.trikdis.com 7January, 2021

Cellular communicator G16T_LTE-M

Terminal

Description

I/O 2

Input/Output terminal (default setting –IN, NO circuit)

I/O 3

Input/Output terminal (default setting –Output)

COM

Common terminal (negative)

A 485

RS485 bus A contact

B 485

RS485 bus B contact

Indicator

Light status

Description

NETWORK

Off

No connection to cellular network

Yellow blinking

Connecting to cellular network

Green solid with yellow

blinking

Communicator is connected to cellular network.

Sufficient cellular signal strength for 4G level 3 (three yellow flashes)

DATA

Off

No unsent events

Green solid

Unsent events are stored in buffer

Green blinking

(Configuration mode) Data is being transferred to/from communicator

POWER

Off

Power supply is off or disconnected

Green solid

Power supply is on with sufficient voltage

Yellow solid

Power supply voltage is insufficient (≤11.5V)

Green solid and yellow

blinking

(Configuration mode) Communicator is ready for configuration

Yellow solid

(Configuration mode) No connection with computer

TROUBLE

OFF

No operation problems

1 red blink

SIM card not found

2 red blinks

SIM card PIN code problem (incorrect PIN code)

3 red blinks

Programming problem (No APN)

4 red blinks

Registration to GSM network problem

5 red blinks

Registration to GPRS/UMTS network problem

6 red blinks

No connection with the receiver

7 red blinks

Lost connection with control panel

Red blinking

(Configuration mode) Memory fault

Red solid

(Configuration mode) Firmware is corrupted

BAND

1 green blink

None

5 green blinks

LTE CAT_M1

6 green blinks

LTE TDD, LTE FDD

www.trikdis.com 8January, 2021

Cellular communicator G16T_LTE-M

Note:

Before you begin, make sure that you have the necessary:

1. USB cable (Mini-B type) for configuration.

2. At least 4-wire cable for connecting communicator to control panel.

3. Flat-head 2.5mm screwdriver.

4. Sufficient gain cellular antenna if network coverage in the area is poor.

5. Activated Nano-SIM card (PIN code request can be turned off).

6. Particular security control panel`s installation manual.

Order the necessary components separately from your local distributor.

Quick configuration with TrikdisConfig software

1. Download configuration software TrikdisConfig from www.trikdis.com (type “TrikdisConfig”in the search field) and install

it.

2. Open the casing of the G16T with a flat-head screwdriver as shown below:

3. Using a USB Mini-B cable connect the G16T to the computer.

4. Run TrikdisConfig. The software will automatically recognize the connected communicator and will open a window for

configuration.

5. Click Read [F4] to read the communicator’s settings. If requested, enter the Administrator or Installer 6-digit code in the

pop-up window.

Below we describe what settings need to be set for the communicator to begin sending events to the Central Monitoring Station

and to allow the security control to be controlled with the Protegus app.

www.trikdis.com 9January, 2021

Cellular communicator G16T_LTE-M

In “User reporting window” “PROTEGUS Cloud” tab:

1. Select checkbox Enable connection to the PROTEGUS Cloud.

2. You can change the Cloud access Code for logging into Protegus if you want users to be asked to enter it when adding

the system to Protegus app (default password - 123456).

In “SIM card” window:

3. Enter SIM card PIN code.

4. Change APN name. APN can be found on the website of the SIM card operator (“internet”is universal and works in many

operator networks).

After finishing configuration, click the button Write [F5] and disconnect the USB cable.

Note:

For more information about other G16T settings in TrikdisConfig,see chapter 0 „

TrikdisConfig window description”.

Important:

Do not forget to turn on the landline dialer of the alarm panel and set it up correctly, so that the panel would

send the events. Alarm panel setup is described in chapter 4 “Programming the control panel”.

www.trikdis.com 10 January, 2021

Cellular communicator G16T_LTE-M

In “System settings” window:

1. Enter Object ID (account) number provided by the Central Monitoring Station (4 characters, 0-9, A-F. Do not use FFFE,

FFFF Object ID).

In “CMS reporting” window settings for “Primary channel”:

2. Communication type - select the IP connection method.

3. Protocol - select the protocol type for your event messages: TRK8 (to TRIKDIS receivers), DC-09_2007 or DC-09_2012 (to

universal receivers).

4. TRK encryption key - enter the encryption key that is set in the receiver.

5. Domain or IP - enter the receiver’s Domain or IP address.

6. Port - enter receiver’s network port number.

7. TCP or UDP - choose event transmission protocol (TCP or UDP) in which events should be sent.

Note:

If you selected the DC-09 protocol, additionally enter object, line and receiver numbers in the Settings tab of

the CMS reporting window.

8. (Recommended) Configure Primary channel Backup settings.

Otros manuales para G16T

Tabla de contenidos

Otros manuales de Teléfono móvil de Trikdis

Trikdis

Trikdis GET Manual de usuario

Trikdis

Trikdis FireCom Manual de usuario

Trikdis

Trikdis E14 Manual de usuario

Trikdis

Trikdis G10 Manual de usuario

Trikdis

Trikdis G16 Manual de usuario

Trikdis

Trikdis G10T Manual de usuario

Trikdis

Trikdis G17F Manual de usuario

Trikdis

Trikdis G17F Manual de usuario

Trikdis

Trikdis G16T 3 Series Manual de usuario

Trikdis

Trikdis E10Tv2 Manual de usuario

Trikdis

Trikdis G16 Manual de usuario

Trikdis

Trikdis G16T Manual de usuario

Trikdis

Trikdis G16T Manual de usuario

Trikdis

Trikdis E16T Manual de usuario

Trikdis

Trikdis G10D Manual de usuario

Trikdis

Trikdis G10 Manual de usuario

Trikdis

Trikdis E10T Manual de usuario

Trikdis

Trikdis G09 Manual de usuario

Trikdis

Trikdis Ethernet E16 Manual de usuario

Manuales populares de Teléfono móvil de otras marcas

Zte

Zte BLADE A520 Manual de usuario

Nokia

Nokia Lumia 620 Manual de usuario

Blackbe;rry

Blackbe;rry KEYone Manual de usuario

Bea-fon

Bea-fon X5 Premium Manual de usuario

Blackbe;rry

Blackbe;rry 8707 Series Manual de usuario

Blackbe;rry

Blackbe;rry Storm Instrucciones de funcionamiento

LG LM-X420QN Manual de usuario

LifeWatch

LifeWatch V Manual de usuario

Bea-fon

Bea-fon SILVER LINE SL860 Manual de usuario

IKI Mobile

IKI Mobile KF4.5i Manual de usuario

Hitech

Hitech HT-850 Manual de usuario

Yezz

Yezz Fashion F10 Manual de usuario

Point Mobile

Point Mobile PM60 Manual de usuario

Blackbe;rry

Blackbe;rry Q10 Manual de usuario

Blackbe;rry

Blackbe;rry Bold 9900 Manual de usuario

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Manual de usuario

LG LM-K420EMW Manual de usuario

ISAFE MOBILE

ISAFE MOBILE IS655.2 Manual de usuario