Theben ThePixa P360 KNX UP WH Manual de usuario

2021-05-26

KNX manual

Optical presence detector

thePixa P360 KNX

Optical presence detector thePixa P360 KNX

Contents

1Function description 4

1.1 Optical presence detector thePixa P360 KNX 4

1.2 Features 5

2Technical data 7

2.1 Dimensions 8

2.2 Detection area 9

3General information about KNX Secure 12

3.1 Start-up with "KNX Data Secure" 13

3.2 Start-up without "KNX Data Secure" 13

4Settings via thePixa Plug app 14

4.1 Connecting smartphone/tablet to the presence detector 15

5The application programme "thePixa P360 KNX" 17

5.1 Selection in the product database 17

5.2 Overview of communication objects 18

5.3 Description of communication objects 23

5.4 Parameter pages overview 32

5.5 General parameters 33

5.6 Zone related parameters 36

6Manual operation with push buttons 54

6.1 Manual operation via switching function without dimmable

lighting 54

6.2 Manual operation via switching function with dimmable light 55

6.3 Manual operation with constant lighting control function 56

7Parallel switching 57

7.1 Master/Slave parallel switching 57

7.2 Master/Master parallel switching 57

7.3 Telegram load when using parallel switching 58

8Aura effect function 59

9Adding the persons counted 60

10 Occupancy rate 61

11 Occupancy density 62

12 Update-Tool 65

13 Typical applications 66

13.1 Presence and brightness-dependent switching of light, 1 zone 66

13.2 Presence and brightness-dependent switching of light, additional

control of heating, 1 zone 68

13.3 Presence and brightness-dependent switching of light, additional

manual override via push button, 4 zones 70

13.4 Constant lighting control, 1 zone 73

Optical presence detector thePixa P360 KNX

13.5 Constant lighting control, additional monitoring of room

occupancy to control ventilation, 1 zone 75

13.6 Constant lighting control, additional manual override vis push

button, 4 zones 77

13.7 Master/Slave parallel switching 81

13.8 Master/Master parallel switching 84

13.9 Aura effect 86

13.10Adding the persons counted 91

Function description

Optical presence detector thePixa P360 KNX 4

1Function description

1.1 Optical presence detector thePixa P360 KNX

Light

The optical presence detector switches or controls up to 6 lighting groups dependent on the presence

of persons and the current brightness. The brightness switching value or setpoint is adjusted by means

of parameters or objects (brightness setpoint value only).

The lighting switches on with presence and insufficient brightness, and off with absence or sufficient

brightness. Manual switching or dimming can be performed with a button.

When constant lighting control is active, the brightness is held constant at the brightness setpoint

value. The control is started fully automatically or manually via button. Manual switching off and

dimming influence or stop the control for the duration of the presence.

HVAC

For each detection zone (max. 6 zones) the presence information can be transmitted, e.g. for heating,

ventilation or air conditioning control. Each channel has a switch-on delay and a time delay. The

integrated temperature sensor also measures the ambient temperature and can be used for control

purposes.

Room occupancy

In each detection zone (max. 6 zones), persons can be counted. This allows an anticipatory regulation,

depending on the number of persons. The predefined thresholds (3 thresholds) can be used to control

a fan, for example. If the number of persons from different zones is to be added together, it is possible

via corresponding links.

Function description

Optical presence detector thePixa P360 KNX 5

1.2 Features

•General:

•Optical presence detector for ceiling installation

•KNX Data Secure

•Rectangular detection area with up to 6 flexible detection zones

(Total area 11.0 x 15.5 m | 171 m2 ; at 4,5 m installation height)

•Restriction of the detection area via app (thePixa Plug)

•Automatic presence and brightness-dependent control for lighting and HVAC

•Each detection zone has its own light measurement

•Adjustment of brightness measurements via thePixa Plug app

•Configurable sensitivity of sensor

•Distinction between motion and presence

•Parallel switching of multiple presence detectors (Master/Slave or Master/Master)

•Test mode for checking function and detection area via app (thePixa Plug)

•Output of occupancy rate and occupancy density via telegram

•Integrated temperature sensor

•Ceiling installation in flush-mounting box (2-point-fixing)

•Surface mounting on ceilings possible with surface frame (option)

•thePixa Plug app sor settings and evaluations (iOS/Android)

•KNX firmware update possible (ETS app)

•Sensor firmware update possible (thePixa Plug app)

Function description

Optical presence detector thePixa P360 KNX 6

•6 channels light, Z1 light – Z6 light:

•Switching or constant lighting control with 6 independent control systems and standby

function (orientation light)

•Switching mode with dimmable lighting

•Free switch object with configuration type switching

•Fully or semi-automatic device

•Brightness switching value configurable in lux by using parameters

•Brightness switching value configurable in lux by using parameters and telegram

•Light time delay configurable by using parameters

•Aura effect for better orientation and greater safety

•Manual override by telegram

•6 channels HVAC, Z1 HVAC – Z6 HVAC

•Configurable switch-on delay and time delay

•Sending of operating mode

•Separate block telegram

•6 channels room occupancy, Z1 room occupancy – Z6 room occupancy

•Output of number of persons

•Control of a fan with up to 3 stages

•3 configurable thresholds (threshold switch)

Technical data

Optical presence detector thePixa P360 KNX 7

2Technical data

Recommended installation height

2.5 – 4.5 m (minimum height ≥ 2,5 m)

Max. detection area

15.5 x 11 m | 171 m

moving radially/tangentially

Detection angle

360° horizontal

Operating voltage

230 – 240 V AC (50 Hz)

Input power (230 V)

Day-mode: 0,9 W

Night-mode: 1,6 W

KNX operating voltage

21 – 32 V DC

KNX medium

TP1-256

KNX bus power input

< 10 mA

Type of installation

Ceiling installation: flush-mounted, surface mounted, or

ceiling installation

Setting range brightness switching

value

5 – 3000 lx / measurement off

Setting range brightness setpoint

5 – 3000 lx / light off

Lighting time delay

0 s – 60 min

Standby dimming value light

1 – 25% of the dimming value

Light standby time

0 s – 60 min / permanently on

Switch-on delay HVAC

0 s – 120 min

Time delay HVAC

0 s – 120 min

Runtime standby HVAC

0 s – 120 min

Standby value HVAC

0 - 255

Setting range temperature

-15 – +60° C

Connection type

Screw terminals | bus connection: KNX bus terminal

Protection rating

IP 20 in accordance with EN 60529

Ambient temperature

-5 – +45 °C

Protection class

II subject to designated installation

Pollution degree

Rated impulse voltage

4 kV

Radio frequency/transmission

power

BLE 2.4 GHz Class 2 (2.5 mW)

Technical data

Optical presence detector thePixa P360 KNX 8

Software

Class A

2.1 Dimensions

Technical data

Optical presence detector thePixa P360 KNX 9

2.2 Detection area

The rectangular detection area of presence detector thePixa P360 KNX covers a large detection area

and can be divided into up to 6 independent zones.

Night mode detection: Night mode switches on automatically at low surrounding brightness. In

this mode, the detection area may be limited at an installation height of ≥ 4 m, depending on the

application.

There is no distinction between a radial (frontal) and tangential (transverse) walking direction.

The recommended installation height is 2.5 – 4.5 m. The detection algorithm is designed for these

installation heights.

The 6 zones can be positioned either in the ETS, or via the thePixa Plug app. In the app, each zone can

then be adjusted separately and individually.

Installation height

Detection area walking

Detection area sitting

2.5 m 54 m2| 6,0 m x 9,0 m 22 m2| 4,0 m x 5,5 m

3.0 m 79 m2| 7,5 m x 10,5 m 35 m2| 5,0 m x 7,0 m

3.5 m 102 m2| 8,5 m x 12,0 m 51 m2| 6,0 m x 8,5 m

4.0 m 128 m2| 9,5 m x 13,5 m 79 m2| 7,5 m x 10,5 m

4.5 m 171 m2| 11,0 m x 15,5 m 102 m2| 8,5 m x 12,0 m

Technical data

Optical presence detector thePixa P360 KNX 10

If the zones are predefined via the ETS, it is imperative to observe the orientation of the thePixa

P360 KNX when installing it.

Label ETS database:

Label thePixa P360 KNX UP WH:

The designation TOP indicates the orientation of the detection area. Also, the area marked with TOP is

displayed at the top of the screen on smartphone / tablet.

During installation, it is important to observe the orientation of the TOP symbol on the mounting frame

(picture on the right). The sensor can only snap into one position on the mounting frame.

Otros manuales para thePixa P360 KNX UP WH

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sensor de seguridad de Theben

Theben

Theben SPHINX 104-360/2 DIMplus Manual de usuario

Theben

Theben compact office 24V Manual de usuario

Theben

Theben thePrema P360-101 E UP WH Manual de usuario

Theben

Theben thePassa P360-221 DALI UP WH Manual de usuario

Theben

Theben theLuxa S150 WH Manual de usuario

Theben

Theben LUXA 103-100 DE WH Manual de usuario

Theben

Theben TIMEGUARD PDFM361AB Manual

Theben

Theben SPHINX 331 S KNX Manual de usuario

Theben

Theben 201 9 290 Manual de usuario

Theben

Theben Timeguard PDSM361AB Manual

Theben

Theben theLeda D S AL Manual de usuario

Theben

Theben theMova S360-101 DE WH Manual de usuario

Theben

Theben ECO-IR 180EIB-AC Manual de usuario

Theben

Theben Luxa 103-200 Manual de usuario

Theben

Theben ECO-IR 180A Manual de usuario

Theben

Theben thePixa P360 KNX UP WH Manual de usuario

Theben

Theben thePiccola P360-100 DE Manual de usuario

Theben

Theben TIMEGUARD LEDPROPCB Manual

Theben

Theben thePrema S360-100 E UP WH Manual de usuario

Theben

Theben thePrema S360 DALI UP WH Manual de usuario

Theben

Theben theLeda D B AL Manual de usuario

Theben

Theben theRonda P360-100 M UP WH Manual de usuario

Theben

Theben thePixa P360 24V KNX UP WH Manual de usuario

Theben

Theben LUXA 103-100 AP WH Manual de usuario

Manuales populares de Sensor de seguridad de otras marcas

THORLABS

THORLABS PDA10JT Manual de usuario

Waeco

Waeco UV-DETECT Manual de usuario

Intermatic

Intermatic IOS-DSIMF Manual de usuario

urmet domus

urmet domus 1083 Manual de usuario

Siemens

Siemens AZL66 Series Manual de usuario

BTI

BTI Profiline Multi Finder Manual de usuario

Challenger

Challenger SL01 Manual de usuario

DMP Electronics

DMP Electronics 1122INT Manual de usuario

Rielta

Rielta Ladoga MK-RK Manual de usuario

Mirion Technologies

Mirion Technologies ACCURAD PRD Manual de usuario

Bosch

Bosch DS835 Manual de usuario

DBI SALA

DBI SALA EZ Stop Manual del operador

Lamptime

Lamptime ST05C Manual de usuario

Ubiquiti

Ubiquiti MFI-MSC Manual de usuario

Subsite

Subsite 910R Instrucciones de instalación

Satel

Satel OPAL Pro Manual de usuario

Aleph

Aleph XC-1XTEU Manual de usuario

Pima

Pima LARIS QUAD Manual de usuario