SureCall Fusion4Home Omni/Panel Manual de usuario
07.14.2021
Cellular signal booster kit for the Home or Ofce
Fusion4Home Max
User Guide
SureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.comSureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.com
2
Thank you for purchasing SureCall’s Fusion4Home Max cellular signal booster kit. SureCall’s Fusion4Home Max was
specically designed to eliminate frustrations over dropped calls and limited range by amplifying incoming and outgoing
cellular signals in homes and ofces.
If you have any questions during setup, please reach out to our US-based experienced support technicians:
Call: 1-888-365-6283
Email: [email protected]
Visit: www.surecall.com/support
Watch
installation,
optimization and
troubleshooting
techniques on
our SureCall
YouTube
channel
@SureCall Stay up to date
with all things
SureCall
SureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.comSureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.com
TABLE OF CONTENTS
How it works ..................................................................................................................................... 4
PACKAGE CONTENTS........................................................................................................................ 4
BEFORE INSTALLATION..................................................................................................................... 6
Installation Overview......................................................................................................................... 6
INSTALLATION .................................................................................................................................... 6
Step 1. Find the Area With the Strongest Signal............................................................................... 6
Step 2. Install the Outside Yagi Antenna and Outside Amplier........................................................ 7
Step 3. Install the Inside Amp and Inside Antenna. .......................................................................... 9
Step 4: Connect to Power and Turn On .......................................................................................... 10
Check and Optimize System, if Needed ..........................................................................................11
IF YOU WANT TO IMPROVE PERFORMANCE.................................................................................11
Antenna Isolation .............................................................................................................................11
TROUBLESHOOTING ....................................................................................................................... 12
LED INDICATORS.............................................................................................................................. 13
SPECIFICATIONS.............................................................................................................................. 14
Kitting .............................................................................................................................................. 14
CONSUMER GUIDELINES................................................................................................................ 16
WARRANTY ....................................................................................................................................... 17
Three-Year Product Warranty ......................................................................................................... 17
3
SureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.comSureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.com
4
How it works
1. The high-gain outside antenna captures even the weakest cell signal, from the cell tower where it is aimed.
2. The Fusion4Home Max outside booster uses Extended Range Technology™ (ERT) to grab signal outside, at its
strongest point, where it boosts voice, text and data signals for all 4G & 5G devices.
3. Using low-loss RG-6 cable, signal is transmitted from the outside to the inside Fusion4Home Max inside
host amplier.
4. The signal is then broadcast from the inside panel antenna to all cellular devices in range.
5. The Fusion4Home Max system also works in reverse, boosting the outgoing signal and to faraway and hard-to-reach
towers.
Outside
Yagi Antenna
Outside Amp
Inside Antenna
Power Supply
Booster
Coax cable
How the SureCall Fusion4Home Max Works
PACKAGE CONTENTS
Unpack all package contents. For missing or damaged items, contact your reseller.
Turn over the signal booster and record the model and serial number for reference:
Serial #: ________________________________________________________________
Purchase Date: __________________________________________________________
Keep the carton and packing material to store the product in case you need to return.
Inside Components
1. Fusion4Home Max inside
host amplier and power supply
3. Inside Cable
(20 ft.)
Outside Components
Your Fusion4Home Max signal booster package includes the following items:
• SureCall Fusion4Home Max inside host and power supply
• Directional Panel Inside Antenna
• Inside cable (connects inside Panel to the booster)
• Outside Yagi antenna
• Outside Amplier
• Outside Cable (connects outside amplier to inside host)
2. Panel antenna
4. Outside Amp 5. Yagi antenna 6. Outside cable (75 ft)
With mounting bracket With mounting bracket
Warning: Changes or modications not expressly approved by SureCall could void the user’s authority to operate the equipment.
SureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.comSureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.com
6
BEFORE INSTALLATION
Prior to securing the location of any booster parts, a “soft install” is recommended as adjustments may be needed to optimize
performance.
Ensure adequate separation between the planned locations of the inside and outside antenna – at least 25 ft (see diagram
”Antenna Separation” on page 7).
For kits that use directional antennas (outside or inside), the directional antenna(s) should be oriented in a way that they do
not “face” the other antenna (see “Aiming Directional Antennas” Diagram).
Ensure sufcient cable length between the outside antenna location and booster location. The length of the provided cable is
75 ft.
Installation Overview
Step 1. Find the outside area with the strongest signal.
Step 2. Install the outside antenna and outside amp in the location identied in step 1.
Step 3. Install the Inside antenna and inside in where signal is needed.
Step 4. Connect power source and turn on.
Step 5. Congure gain settings if needed.
INSTALLATION
Step 1. Find the Area With the Strongest Signal
Using your phone, identify the outside location with the strongest signal for placement of your outside antenna. Generally, this
is found above the rooine on the side facing your nearest cell tower and as high as possible – where the antenna can ‘see’
your cell tower. To nd the location of your carrier’s closest cell tower, go to www.antennasearch.com.
The coverage area that the booster provides is directly related to the strength of incoming signal received by the outdoor
antenna. Mounting the outside antenna where the signal is the strongest will provide the best results.
Please note, if signal is extremely weak where the outside antenna is installed, indoor coverage will be limited. Bars are not
always a reliable measure of signal. The best way to conrm signal coverage is the ability to place and hold a call.
More detailed measurements can be taken by reading your phone’s signal in decibels(dB). Decibels are measured in the
Signal Strength
Excellent
-50 dB
-60 dB
-70 dB
-80 dB
-90 dB
-100 dB
GoodPoor
negatives and generally should fall between -40 and -130. A score closer to zero indicates a stronger signal. For example, a
signal of -120 dB indicates no service, while a score of about -50 dB means you have excellent signal.
For specic dB signal measurements, use the methods below.
• iOS - First turn off your Wi-Fi, Next, open the Phone app an dial *3001#12345#* then press the call button. This will open
the Field Test app. Once open, menu navigation varies depending on iOS version, as well as, carrier and iPhone model;
however these instructions should get you to the right place.
• iOS 14 and later: Navigate to LTE in the menu list then tap on Serving Cell Meas. The measurements that read
“rsrp0” and “rspr1” are your cellular signal strength in decibel-milliwatts.
• If you’re using an earlier version of iOS, we have more information available here: https://blog.surecall.com/enter-
eld-test-mode-on-iphone-or-android-phones/
• Android devices: Download the app “Network Signal Info” in the Google Play store.
Step 2. Install the Outside Yagi Antenna and Outside Amplier
Once you have identied the area of strongest signal, choose where you will mount your outside antenna and outside
amplier by considering the following:
Note there are two outside components -- a Yagi directional antenna and the outside amplier. Both components should
be mounted on a pole or pipe (not provided), at the highest possible location above the rooine – at least 25 ft above the
planned location for the indoor antenna.
Ensure that the mounting area has at least a 3 ft radius clear of obstructions, other radiating elements and metal objects such
as pipes or metal siding
Warning: Do not collocate antennas or operate the outdoor antenna with any other antenna or signal booster.
Outside
Yagi Antenna
Outside Amp
Inside Antenna
SureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.comSureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.com
8
IMPORTANT:
Take caution during installation to not aim these antenna towards the other
antenna
OK
Aiming Directional Antennas
Installing the Yagi antenna:
The Yagi antenna should be aimed in the direction of your nearest
cell tower. If you’re not sure of the location of your carrier’s nearest
tower, go to www.antennasearch.com.
Once you have identied your install location, assemble the u-bolt,
bracket, nuts and washers onto a pole (available separately) as
shown in the illustration. Keep the connections loose enough to allow
the antenna to rotate until the optimum direction is found.
Orient the antenna with the drip hole at the bottom.
Place the Outside Amplier
Next assemble the bracket for the outside amplier the same way you
did the yagi bracket and secure in the same location within range of the
antenna cable connection.
Connect the yagi cable connector to the outside amplier as shown here,
→↗⇱⇲⦬⤽↥⥁⤻↺⇝
Outside system assembled
Outside
Antenna
Nut
Washer U-bolt
Bracket
Drip Hole
Outside Amp
Outside system assembly
Step 3. Install the Inside Amp and Inside Antenna.
Choose a location for the booster and inside antenna that is near a working outlet and at least 25 Ft from the outside antenna.
Consider the below factors affecting booster performance.
1. Signal strength at the location of the outside antenna.
2. Interior building materials between the inside antenna and your mobile device.
3. Distance between the outside antenna and inside antenna (minimum 25 ft. separation)
4. Ensure inside antenna points away from the outside antenna
Note: This booster should not be used near open re or ame. Storage and transportation: Store and place in non-extreme room-temperature and dry environment.
Panel Antenna
SureCall’s Inside panel antennas are directional with a 120˚ reach. They should be mounted facing the area signal is needed
and away from the outdoor antenna (See “Aiming Directional Antennas” on page 8).
Mount on a vertical surface that is the approximate height of normal cell phone use. The antenna may be concealed behind a
wall provided there are no materials that could obstruct signals.
Besides the antenna itself, parts include mounting equipment for a at horizontal
surface.
1. Using plate, mark position of desired screw placement.
2. Screw mounting plate into place with the slide panel protruding towards you.
3. Slide antenna securely onto mounting plate.
4. Connect antenna to one end of the SC-240 cable and run to location of your host
amp
5. Place the host amp on a at surface or mounted to a wall and connect the
remaining end of the SC-240 cable to booster port marked INSIDE.
Panel Antenna and
Inside cable
Fusion4Home Max inside
host amp and power supply
Mounting
Plate
Anchors /
Screws
SureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.comSureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.com
10
Place the Inside Host
To install the booster to a wall, select a location that is near a working AC outlet. Use the supplied screws or appropriate
screws for surface of mounting location and drill through screw tab holes on booster (see “Booster Diagram” illustration) and
mount the booster to a wall.
Next, connect the outside and inside components by routing the outside cable from the outside amplier indoors and connect
to the booster port marked “OUTSIDE”.
Step 4: Connect to Power and Turn On
Connect the AC power cord to the booster and plug into a 110V AC power outlet. Once the booster has been completely
assembled, turn the booster’s power switch to ON.
Note: If the Power LED does not turn ON or the Alert LEDs continue to ash, see the ”Troubleshooting” on page 12
section.
Note: This booster is rated for 5-15V input voltage. DO NOT use the booster with a higher voltage power supply. This can damage the booster, cause personal injury,
and void your warranty.
Power Jack
Power Switch
Connector to Inside Antenna
N connector to inside antenna
F connector to outside antenna
44
OFF
54
64
44
OFF
54
64
45
OFF
55
65
52
OFF
62
72
51
OFF
61
71
Screw tab holes for optional wall mounting
Booster Diagram
Otros manuales para Fusion4Home Omni/Panel
6
Tabla de contenidos
Otros manuales de Extensor de SureCall
SureCall
SureCall SC-PolysH/O-72 Manual de usuario
SureCall
SureCall Force7 Industrial Manual de usuario
SureCall
SureCall Fusion5S CA Manual de usuario
SureCall
SureCall EZBoost 3G Manual de usuario
SureCall
SureCall CM-M2M-19 Manual de usuario
SureCall
SureCall M2M-V Manual de usuario
SureCall
SureCall Fusion2Go 3.0 CA Manual de usuario
SureCall
SureCall Fusion2Go Max Manual de usuario
SureCall
SureCall Fusion4Home 3.0 CA Manual de usuario
SureCall
SureCall Force5 Inline Manual de usuario
SureCall
SureCall SC-PolyO2-72 Manual de usuario
SureCall
SureCall Fusion 7 Manual de usuario
SureCall
SureCall Force5 Inline Manual de usuario
SureCall
SureCall SC-POLYO2-72-OU-P Manual de usuario
SureCall
SureCall Fusion Professional 2.0 Manual de usuario
SureCall
SureCall Fusion2Go 2.0 Manual de usuario
SureCall
SureCall Flare Manual de usuario
SureCall
SureCall Fusion4Home Yagi/Whip Manual de usuario
SureCall
SureCall N-Range Manual de usuario
SureCall
SureCall FlexPro Manual de usuario
