StarTech.com USBVGADOCK Manual de usuario
USB 4-in-1 Docking Station with VGA
USBVGADOCK
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turn-
ing the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the equipment and receiver.•
Connect the equipment into an outlet on a circuit different from that to which the receiver•
is connected.
Consult the dealer or an experienced radio/TV technician for help.•
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected
names and/or symbols of third-party companies not related in any way to StarTech.com.
Where they occur these references are for illustrative purposes only and do not represent an
endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct
acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowl-
edges that all trademarks, registered trademarks, service marks, and other protected names
and/or symbols contained in this manual and related documents are the property of their
respective holders.
Instruction Manual
i
Instruction Manual
Table of Contents
Introduction ................................................................................... 1
Installation...................................................................................... 2
Driver Installation .......................................................................... 2
Windows 2000/XP.................................................................2
Windows Vista™ ...................................................................3
Verifying Driver Installation ..........................................................5
Windows 2000/XP.................................................................5
Windows Vista™ ...................................................................6
Operation........................................................................................ 8
USB to Ethernet ....................................................................8
USB to Audio.........................................................................8
USB to VGA...........................................................................8
Modes of Display Operation ........................................................9
Primary..................................................................................9
Extended (Default) ................................................................9
Mirror.....................................................................................10
OFF .......................................................................................10
Rotation.................................................................................10
Troubleshooting............................................................................. 11
Specifications ................................................................................ 13
Technical Support........................................................................14
Warranty Information ...................................................................14
Instruction Manual
1
Introduction
Thank you for purchasing a StarTech.com 4-in-1 USB Docking Station
with VGA. This innovative device converts a single USB 2.0 port into
multiple connection ports, including a VGA Port, 10/100 RJ45 network
port, dual (3.5mm phono) audio ports and four additional USB 2.0 ports.
Perfect for desktop or notebook operating environments, USBVGADOCK
also makes a stylish addition to any desktop or notebook computer.
Features
Supports monitor resolutions up to WUXGA 1920 x 1200•
Plug-and-Play USB connectivity•
Stereo audio output (Speaker/Headphone) and monaural audio input•
(Microphone)
Package contents
This package should contain:
1 x USB Docking Station with VGA•
1 x USB 2.0 A to mini B type cable•
1 x AC Power Adapter (DC 3A/5V)•
1 x Driver CD•
1 x Instruction Manual•
System Requirements
1.0GHz or higher processor (i.e.Intel Pentium 4 / Celeron Family AMD•
K6 / Athlon / Duron Family)
256 MB memory or higher (512B memory or higher recommended for•
optimal performance)
Available USB 2.0 port, USB 2.0 host controller•
Windows 2000 SP4 / Windows XP SP2 / Windows Vista•
Instruction Manual
2
Installation
Installing the device driver enables your computer’s operating system to
recognize the docking station ports once it is connected.
To properly connect USBVGADOCK to a host computer, please ensure
that the necessary driver installation (detailed below) has been completed
prior to connecting USBVGADOCK to the host computer.
Driver Installation
Windows 2000/XP
With the computer in a powered state, insert the Driver CD (included)1.
into the CD/DVD-ROM drive. When the setup program launches, click
OK to launch the InstallShield Wizard.
If the setup program does not begin automatically, please browse to
and execute the Setup.exe file on the Driver CD (D:\Disk 1\Setup.exe ,
where D: denotes the path of your CD/DVD-ROM drive).
Click2. Next on the InstallShield Wizard Welcome screen:
When the License Agreement screen appears, please review it and3.
check I accept the terms of the license agreement. Click Next to
proceed.
Instruction Manual
3
When the Microsoft Hardware Installation warning dialogue appears,4.
please select Continue Anyway to continue with the device driver
installation. It will not affect the device driver installation or device
usage.
Once the installation has completed, you will be asked if you wish to re5.
start your computer. Please select Yes, I want to restart my
computer now and click Finish to reboot.
After rebooting, the Found New Hardware6. Wizard will appear. Please
ensure that Install the software automatically (recommended) is
selected, and click on Next to continue.
A Microsoft Hardware Installation warning dialogue will be displayed;7.
please select Continue Anyway.
Upon completion, the Found New Hardware Wizard will indicate that it8.
has ...finished installing the software... Please click on Finish.
Windows Vista™
With the computer in a powered state, insert the Driver CD (included)1.
into the CD/DVD-ROM drive. When the setup program launches, click
OK to launch the InstallShield Wizard.
If the setup program does not begin automatically, please browse to
and execute the Setup.exe file on the Driver CD (D:\Disk 1\Setup.exe ,
where D: denotes the path of your CD/DVD-ROM drive). Click OK to
launch the InstallShield Wizard.
Instruction Manual
4
Click2. Next on the InstallShield Wizard Welcome screen (shown
previous page).
When the License Agreement screen appears, please review it and3.
check I accept the terms of the license agreement. Click Next to
proceed.
A Windows Security warning dialogue box will appear. Please select4.
Install this driver software anyway to continue:
Upon completion, the Found New Hardware Wizard will indicate that it5.
has ...finished installing the software... Please select Yes, I want to
restart my computer now and click Finish to reboot
Instruction Manual
5
Verifying Driver Installation
Windows 2000/XP
To ensure that driver installation was successful:
Right-click on1. My Computer.
Select2. Manage to launch the Computer Management window.
In the left pane of the Computer Management window, select3. Device
Manager.
At the top of the Computer Management window, click on View, then
select By Connection Type:
In the right pane of the Computer Management window, select4.
Standard Enhanced PCI to USB Host Controller, then click on USB
Root Hub, to diplay the newly installed devices (depicted on the
following page):
High Speed USB Ethernet Adapter, USB2.0 GRAPHIC DOCK Device
USB Composite Device, USB Audio Device, USB Human Interface
Device, HID-compliant consumer control device.
Instruction Manual
6
Windows Vista™
Right-click on1. Computer.
Select2. Manage to launch the Computer Management window.
In the left pane of the Computer Management window, select3. Device
Manager.
At the top of the Computer Management window, click on View, then
select By Connection Type:
Instruction Manual
7
In the right pane of the Computer Management window, select4. Intel(R)
82801GB USB2 Enhanced Host Controller-27CC, then USB Root
Hub to display the list of newly installed devices:
High Speed USB- Ethernet Adapter, USB 2.0 GRAPHIC DOCK, USB
Composite Device, USB Human Interface Device, HID-compliant
consumer control device, USB Multimedia Audio Device.
Otros manuales para USBVGADOCK
1
Tabla de contenidos
Otros manuales de Estación de acoplamiento de StarTech.com
StarTech.com
StarTech.com USB3SDOCKD Manual de usuario
StarTech.com
StarTech.com InfoSafe SATDOCKU2GB Manual de usuario
StarTech.com
StarTech.com USB3SDOCKDD Manual de usuario
StarTech.com
StarTech.com SDOCKU33BV Manual de usuario
StarTech.com
StarTech.com 116N-USBC-DOCK Manual de usuario
StarTech.com
StarTech.com SATDOCKU3S Manual de usuario
StarTech.com
StarTech.com USB6N1DOCK Manual de usuario
StarTech.com
StarTech.com USBA2DPGB Manual de usuario
StarTech.com
StarTech.com DKT31CHDVCM Manual de usuario
StarTech.com
StarTech.com SATDOCK22RE Manual de usuario
StarTech.com
StarTech.com TB3DKDPMAW Manual de usuario
StarTech.com
StarTech.com TB3DK2DPWUE Manual de usuario
StarTech.com
StarTech.com SATHDDDOCKU2 Manual de usuario
StarTech.com
StarTech.com SATADOCK22UE Manual de usuario
StarTech.com
StarTech.com DK30CH2DEPUE Manual de usuario
StarTech.com
StarTech.com TBDOCKHDPBC Manual del sistema
StarTech.com
StarTech.com SDOCKU33HW Manual del sistema
StarTech.com
StarTech.com USB7N1DOCKGB Manual de usuario
StarTech.com
StarTech.com USB3SDOCKHDV Manual de usuario
StarTech.com
StarTech.com SDOCK2U313 Manual de usuario
