StarTech.com USB7N1DOCKGB Manual de usuario
USER’S MANUAL
USB 2.0 6in1 / 7in1
Docking Station
DS.2.0.08042003
Index
Page
Introduction………………………………………………………………… 1
Features……………………………………………………………………. 1
Specification………………………...………………….………………….. 1
Requirements……………………..….…………………………………… 2
Package contents…………………..……………….……………………. 2
Chapter 1
Hardware Installation Guide…….…..….…………………………………… 3
Used for I/O applications.…..….……………………………………………. 4
Hardware Installation.………………………………………………………. 4
Chapter 2
Software Installation…...…………….……………….…………………….. 5
Host Link on Other Computer……………….………………………………. 26
Running the PC-Linq Program…….………………………………………… 27
NOTICE………………………………………………………….………… 28
Serial/Parallel Port Limitation………………………………………………... 28
Appendix
Software Update……………………………………………………………. 29
USB Speed…………………………….…………..………………………. 29
Abbreviations……………………………………………………………….. 30
Keyed Connector Protocol…………………………..……………………… 31
Macintosh OS Compatibility Testing Report………………..………………… 32
This Product is achieve the USB 2.0 High-Speed, must be plugged in to USB 2.0 Host Port. If
this product is plugged into the USB 1.1 Host port, this product will only have USB 1.1 Full-Speed.
Docking Station Limitation for support
Serial “Keyboard” and “Mouse” (Page28)
- Page 1 -
Introduction：
The USB 2.0 Docking Station is an all-in-one hub that could simplify your
computer connections with just one single box. It expands your computer with
one USB Upstream Port, two USB Downstream Ports, one DB25P(female) IEEE
1284 Parallel Port, one DB9P(male) RS232C Serial Port, two PS/2 ports Mini-Din
6P(female), Host Link and one 10/100 Mbps Ethernet RJ-45 Port (7in1). This
exclusive product makes expansion amazingly simple, convenient and the most
important is that it's economical and inexpensive. No complex installation,
confusing cables plug-ins or IRQ’s to worry about. You can simply plug and play
all of your peripherals without re-booting PC computer.
Features：
Support USB 2.0.
USB and ACPI compliant.
Support USB High-Speed 480Mb/Sec or Full-Speed at 12Mb/sec.
USB
Truly Plug & Play automatic system configuration.
Compatible with Notebook & Desktop PCs
Two USB 2.0 Downstream ports.
One PS/2 Port for Keyboard
One PS/2 Port for Mouse
One serial Port.
One Parallel Port (Standard IEEE-1284 Parallel Port)
One USB 1.1 Host Link.
Functions
One USB 2.0 10/100 Ethernet LAN Port (7in1)
OS Windows 2000, Windows XP, Windows ME, Windows 98SE
Power The Docking Station use USB Bus and self power
Specification：
Interface Universal Serial Bus (USB) Revision 2.0 device.
One Upstream Port, USB B-type.
Two USB 2.0 Downstream ports, USB A-type.
One PS/2 Port for Keyboard, 6-pins Mini-Din (female) connector.
One PS/2 Port for Mouse, 6-pins Mini-Din (female) connector.
One serial Port, DB 9-pins (male) connector.
One Parallel Port (Standard IEEE-1284 Parallel Port). DB 25-pins
(female) connector.
One USB 1.1 B-type Host Link.
One USB 2.0 10/100 Ethernet LAN Port, RJ-45 connector. (7in1)
Hubs and devices up to total 127 devices.
Function/
Connector
Plug-and-Play all of your peripherals without re-booting PC computer.
- Page 2 -
Expansion amazingly simple.
Cable USB cable (A to B male)
USB transfer rate: High-Speed 480Mb/Sec.
Transfer
Rate Data read/write speed: Up to 480Mb/Sec.
Power LED
Host Link LED
LED
Ethernet LED (7in1)
Power Power Adapter DC 6 V. 2.1A
Enclosure Plastics.
EMI CE & FCC.
Requirements：
IBM PC/AT Compatible.
USB 2.0 Host card or USB 2.0 HUB device.
Windows 2000, Windows XP, Windows ME or Windows 98SE operating system.
Packing contents：
Please make sure that this package includes the following items.
USB Docking Station – One Software CD Driver include User’s Manual – One
USB cable (A to B male) – One Power Adapter – One
Warnings
Some Main board may have its OWN driver for the USB 2.0 Host driver,
please make sure your Main board or PC manufacturer for update details.
- Page 3 -
Chapter 1
Hardware Installation Guide：
1234 56
Front Side
1. Parallel Port (DB25P)
2. Serial Port (DB9P)
3. PS/2 Mouse (Mini-Din 6P)
4. PS/2 Keyboard (Mini-Din 6P)
5. USB 1 (A-type)
6. USB 1 (A-type)
7
8
11
12
910
13
Left Side Right Side
7. USB 2.0 Ethernet (RJ-45) (7in1)
8. USB 1.1 Host Link (B-type)
9. Upstream Port (B-type)
10. Power Adaptor
11
12
13
Left Side
Right Side
Front Side
- Page 4 -
LED
11. Power LED 12. Ethernet LED (7in1) 13. Host Link LED
Used for I/O applications
USB Port Digital Camera, Card Reader, Mouse, Scanner, Printer, Removable Storage
Drive
PS/2 Port Mouse, Keyboard
Serial Port Modem (Page 28)
Parallel Port Printer (Page 28)
Host Link
Host Link provides a software tool to enable end-user being capable of
accessing remote file data in remote computer's storage devices through a
simple drag & drop procedure
Ethernet Pbx, Networking, Dumb Terminal, Point-of-sale
Hardware Installation
Step1：Connect the power jack of the power adapter and plug it into the right side of the
USB Docking Station.
Step2：Find an unused electrical outlet and plug in the power adapter.
Step3：Plug the USB cable “A” type in to free USB Host port on computer.
Step4：Plug the USB cable “B” type into the USB Upstream port connector on the right side
of the USB Docking Station.
Warnings
If your OS is Windows 98SE/ME, Windows has finished installing the software.
Popup “To finish setting up your new hardware, you must restart your computer”
wizard, please choose click “NO” to continue install the driver.
Chapter 2
Software Installation：
Supported OS
Microsoft Windows 2000，Windows XP，Windows ME，Windows 98SE are supported.
Windows will automatically find the USB Docking Station 6in1 / 7in1, will prompt new
hardware wizard. USB 2.0 Ports, PS/2 Keyboard and Mouse Ports, Data Link Port, Serial
Port, Parallel Port and LAN Port (7in1). Please follow the software installation wizard
step-by-step.
- Page 5 -
Step1：Found new hardware wizard, insert the Installation CD into CD-ROM, choose click
“Next”.
Step2：Choose click “Next”, follow the software installation step-by-step.
Step3：Select “CD-ROM drives” or “Specify a Location”, choose click “Next”.
- Page 6 -
Step4：Browser a CD driver specify a location, choose click “OK”.
Step5：Choose click “Next”.
- Page 7 -
Step6：Choose click “Finish”.
Step7：Choose click “Next”.
- Page 8 -
Step8：Choose click “Next”.
Step9：Select “CD-ROM drives” or “Specify a Location”, choose click “Next”.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Estación de acoplamiento de StarTech.com
StarTech.com
StarTech.com TB3DK2DPW Manual de usuario
StarTech.com
StarTech.com USB3SDOCKDD Manual de usuario
StarTech.com
StarTech.com SATDOCKCRH Manual de usuario
StarTech.com
StarTech.com USB3SDOCKD Manual de usuario
StarTech.com
StarTech.com SDOCK1EU3P Manual de usuario
StarTech.com
StarTech.com TBDOCKHDPBC Manual de usuario
StarTech.com
StarTech.com DK30CHDPD Manual de usuario
StarTech.com
StarTech.com UNIDOCK2U Manual de usuario
StarTech.com
StarTech.com DKM31C3HVCPD Manual de usuario
StarTech.com
StarTech.com SDOCK2U33V Manual de usuario
StarTech.com
StarTech.com DK30A2DHU Manual de usuario
StarTech.com
StarTech.com USBVGADOCK2 Manual de usuario
StarTech.com
StarTech.com USB3SDOCKHD Manual del sistema
StarTech.com
StarTech.com TB3DKDPMAW Manual de usuario
StarTech.com
StarTech.com USB3SMDOCK4K Manual de usuario
StarTech.com
StarTech.com SATDOCK4U2E Manual de usuario
StarTech.com
StarTech.com DK30CH2DEPUE Manual de usuario
StarTech.com
StarTech.com USB5N1DOCK Manual de usuario
StarTech.com
StarTech.com USB3VDOCKD Manual de usuario
StarTech.com
StarTech.com SATDOCKU3SP Manual de usuario
