Socket DURASCAN D760 Instrucciones de funcionamiento
PROGRAMMING GUIDE
1D/2D/OCR/DOTCODE READER - D760,D860,S760 AND S860
This document pertains to the following D760, D860, S760, S860:
Model
D760 Construction Orange
D760 Safety Green
D760 Utility Gray
Model
S760 Blue
S760 Green
S760 Red
S760 White
S760 Yellow
Model
S860 Black
Model
D860 Black
TABLE OF CONTENTS
COMPANION APP 3
RESETS 3
BLUETOOTH CONNECTION MODE 4
PREFIX/SUFFIX 5
VIBRATE/BEEP MODES 6
ACTIVE MODES 7
PRESENTATION MODES 8
HID KEYBOARD LANGUAGE SETTINGS 9-10
AUTOMATIC RECONNECTION 11
BLUETOOTH CONNECTION ROLES 12
DATA MODE - FOR SPP MODE ONLY 13
PROGRAMMING 14
OCR 15-24
1D SYMBOLOGIES
UPC/EAN 25-35
CODE 128 36
GS1-128 36
CODE 39 37-38
CONVERT CODE 39 TO CODE 32 (ITALIAN PHARMA CODE) 39
CODE 32 PREFIX 39
CODE 93 40
INTERLEAVED 2 OF 5 41
CODABAR 42-43
MSI 44-45
GS1 DATABAR 46-47
2D SYMBOLOGIES
PDF417 48
MICROPDF417 48
DATAMATRIX 48
MAXICODE 48
QR CODE 49
MICROQR 49
AZTEC 49
HAN XIN 49
DOTCODE 49
POSTAL CODES 50-51
SAMPLE BARCODES 52-53
3
COMPANION APP
Make sure the scanner is not connected to a host computer or device before scanning a command
barcode.
Factory Reset
Congures the scanner to factory defaults. The scanner powers o after scanning this barcode.
Scan QR code with mobile device to
download app.
Scan QR code with mobile device to
download app.
Set up your scanner with Socket Mobile Companion App.
• Easy to follow instructions for pairing scanners
• Check scanner status
• Check warranty and register scanners
Learn more about Application Mode.
RESETS
Pairing Reset
If the scanner is paired with a device, unpair it before trying to connect to a dierent device.
Step 1: Scan barcode (for serial number that begins 1931 and above only).
Or follow steps to manually reset scanner:
A. Power on the scanner.
B. Press and hold down the scan button.
C. Press and hold down the power button.
D. After you hear 3 beeps, release both buttons.
The scanner will unpair and automatically power o.
Step 2: Remove or forget the scanner from the Bluetooth list on the
host device.
The scanner is now discoverable.
Both steps above must be done to complete the unpairing.
4
BLUETOOTH CONNECTION MODE
Make sure the scanner is not connected to a host computer or device before scanning a command
barcode.
Scan command barcode(s) to congure the scanner.
Basic Mode (HID) (default)
(All host devices)
Congures the scanner to Human Interface Device (HID) mode. The scanner will be discoverable as a
keyboard to other Bluetooth devices.
Application Mode (MFi-SPP) for Apple Devices
*Required for Apple iOS applications developed with Socket Mobile SDK.
Application Mode (Auto Connect-SPP) for Windows or Android 8.0 and later
*Congures the scanner to Serial Port Prole.
Application Mode (SPP) for Windows or Android version 7.0 and lower
*Congures the scanner to Serial Port Prole (SPP).
*For compatible applications developed with Socket Mobile SDK: socketmobile.com/partners/app
5
You can congure the scanner to automatically add a prex and/or sux to each scan of data. Scanner is
allowed 1 prex and 2 suxes.
For custom prex and sux, contact [email protected].
Note: Scanning multiple commands in a single instance will overwrite (not append) the previous
command.
Sux – Carriage Return (default)
Congures the scanner to add a carriage return after decoded data.
Sux – Tab
Congures the scanner to add a tab after decoded data.
Sux – Carriage Return and Line Feed
Congures the scanner to add a carriage return and line feed after decoded data.
Data As Is
Congures the scanner to return only the decoded data (i.e., no prex or sux).
PREFIX/SUFFIX
Make sure the scanner is not connected to a host computer or device before scanning a command
barcode.
Vibrate “On” (default)
Enable the scanner to vibrate to indicate a successful scan.
Vibrate “O”
Disable the scanner from vibrating to indicate a successful scan.
Beep “On” (default)
Enable the scanner to vibrate to indicate a successful scan.
Beep “O”
Disable the scanner from beeping to indicate a successful scan.
VIBRATE/BEEP MODES
6
Scan one of the barcodes to recongure the scanner to remain powered on for a longer time.
These settings drain the battery faster. Please ensure the scanner is charged daily.
2 hours (default)
Scanner powers o in 2 hours when idle/inactive while connected and 5 minutes when disconnected.
Continuous Power for 4 hours
Congures the scanner to remain on for 4 hours.
Continuous Power for 8 hours
Congures the scanner to remain on for 8 hours.
Scanner Always On
Congures the scanner to never power o.
ACTIVE MODES
7
PRESENTATION MODES
Scan one of the barcodes to congure the scanner to automatically scan barcodes.
These settings drain the battery faster. Please ensure the scanner is charged daily.
Mobile Mode (default)
Reverts back to manual scan mode.
#FNB 41FBA50000#
Auto Mode (recommended)
Congures the scanner to switch to presentation mode when power is detected on the charging pins. The
scanner will remain on presentaion mode until the scan button is pressed to exit the mode.
#FNB 41FBA50003#
Detect Mode
Congures the scanner to switch to presentation mode when power is detected on the charging pins. The
automatic scan will continue until power is removed.
#FNB 41FBA50002#
Stand Mode
Scanner is permanently in presentation mode.
#FNB 41FBA50001#
Command barcode is for model D760 and S760 only.
8
9
Scan only when the scanner is in Basic Mode (HID prole).
These barcodes are to congure the scanner for dierent languages using Microsoft Windows keyboard
layout.
English (Default)
English UK
French
German
Italian
HID KEYBOARD LANGUAGE SETTINGS
HID KEYBOARD LANGUAGE SETTINGS
Japanese
Polish
Spanish
Swedish
ANSI Emulation
ANSI Emulation can be slower on Windows systems.
10
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Lector de código de barras de Socket
Socket
Socket CHS Series 7 Manual de usuario
Socket
Socket SocketScan 700 Series Manual de usuario
Socket
Socket DuraScan D730 Manual de usuario
Socket
Socket CHS Series 7 Manual de usuario
Socket
Socket 9M Manual de usuario
Socket
Socket DuraSled DS800 Series Manual de usuario
Socket
Socket CHS 7M Manual de usuario
Socket
Socket Cordless Ring Scanner Series 9 Manual de usuario
Socket
Socket XtremeScan Manual de usuario
Socket
Socket Wand Scanner 2E Manual de usuario
Socket
Socket CHS 7Ci Manual de usuario
Socket
Socket CHS 7Ci Manual de usuario
Socket
Socket 7Qi Manual de usuario
Socket
Socket 5 Series Manual de usuario
Socket
Socket CHS Series 7 Manual de usuario
Socket
Socket PocketPak Manual de usuario
Socket
Socket CHS 7Mi Manual de usuario
Socket
Socket Gun Scanner (GS) 2X (Xtreme Performance) Manual de usuario
Socket
Socket 8 Series Manual de usuario
Socket
Socket D700 Instrucciones de funcionamiento
