Socket CHS Series 7 Manual de usuario

Cordless Hand Scanner Series 7

with Bluetooth®Wireless Technology

Featuring a Bluetooth enabled bar code scanner for wirelessly

adding bar code scanning to Bluetooth enabled mobile computers

running:

•Windows Mobile 2003, 2003SE or 5.0

•Windows CE.NET for the Intermec CK30

•Palm OS 5.2 or later

•Windows XP or XP Tablet Edition

User’s Guide

9/2007 Document # 6410-00233 K

Socket, the Socket logo and Battery Friendly are registered trademarks of

Socket Communications, Inc. dba Socket Mobile, Inc. Cordless Hand

Scanner with Bluetooth Wireless Technology, SocketScan, Mobility

Friendly, Connect!Agent, and Error Proof Protocol are trademarks of

Socket Communications, Inc. dba Socket Mobile, Inc. Bluetooth and the

Bluetooth logos are registered trademarks owned by Bluetooth SIG, Inc.,

U.S.A. and licensed to Socket Mobile, Inc. All other brand and product

names are trademarks of their respective holders.

The Cordless Hand Scanner includes technology licensed under United

States Patent Numbers 5,902,991 and D526,320 S.

Reproduction of the contents of this manual without the permission of

Socket Mobile is expressly prohibited. Please be aware that the products

described in this manual may change without notice.

Feel free to contact Socket Mobile at:

Socket Mobile, Inc.

39700 Eureka Drive

Newark, CA 94560-4808

Other than the above, Socket Mobile can assume no responsibility for

anything resulting from the application of information contained in this

manual.

Please refrain from any applications of the Socket Cordless Hand Scanner

that are not described in this manual. Please refrain from disassembling the

Cordless Hand Scanner. Disassembly of this device will void the product

warranty.

You can track new product releases, software updates and technical

bulletins by visiting Socket’s website at: www.socketmobile.com.

TABLE OF CONTENTS

1 | INTRODUCTION 5

SCANNER VERSIONS 5

ABOUT THE SOFTWARE 5

ABOUT COMBINING SCANNING WITH BLUETOOTH 6

SYSTEM REQUIREMENTS 7

PACKAGE CONTENTS 8

PRODUCT REGISTRATION 8

ADDITIONAL DOCUMENTATION 8

HARDWARE FEATURES 8

2 | HARDWARE PREPARATION 11

INSTALLING BATTERIES AND ATTACHING THE TETHER 11

CHARGING THE SCANNER 12

3 | SETUP FOR WINDOWS MOBILE 13

STEP 1: INSTALL THE SOFTWARE 14

STEP 2: CONFIGURE SCANNER SETTINGS 16

STEP 3: CONNECT CHS TO HOST DEVICE WITH BLUETOOTH 18

STEP 4: SCAN DATA INTO YOUR APPLICATION 20

SELECTING SYMBOLOGIES 23

CONFIGURING PREFIXES/SUFFIXES 24

CONFIGURING SOUNDS 25

RUNNING SCAN DEMO 26

USING THE CONNECT!AGENT UTILITY 27

4 | SETUP FOR THE INTERMEC CK30 29

STEP 1: INSTALL THE SOFTWARE 30

STEP 2: CONNECT CHS TO CK30 WITH BLUETOOTH 32

STEP 3: SCAN DATA INTO YOUR APPLICATION 35

SELECTING SYMBOLOGIES 37

CONFIGURING PREFIXES/SUFFIXES 38

MANAGING POWER SETTINGS 39

5 | SETUP FOR PALM 40

STEP 1: INSTALL THE SOFTWARE 41

STEP 2: CONNECT CHS TO PDA WITH BLUETOOTH 42

STEP 3: SCAN DATA INTO YOUR APPLICATION 45

CONFIGURING SCAN SETTINGS 47

SELECTING SYMBOLOGIES 49

TESTING BAR CODES 50

5 | SETUP FOR WINDOWS XP 51

STEP 1: INSTALL THE SOFTWARE 52

STEP 2: CONFIGURE BLUETOOTH SETTINGS 54

STEP 3: CONFIGURE SCANNER SETTINGS 60

STEP 4: START SOCKETSCAN AND CONNECT TO CHS 62

STEP 5: SCAN DATA INTO YOUR APPLICATION 63

ASSIGNING SOUND AND PREFIX/SUFFIX SETTINGS 65

CONFIGURING ADVANCED BLUETOOTH SETTINGS 66

ASSIGNING A TRIGGER BUTTON 68

SELECTING SYMBOLOGIES 69

VIEWING VERSION INFORMATION 70

APPENDICES:

A | SPECIFICATIONS 71

B | SAFETY AND USAGE TIPS 74

C | BAR CODE LABEL SPECIFICATIONS 76

D | ENABLING OR DISABLING SYMBOLOGIES 77

E | DECODE ZONE 80

F | TROUBLESHOOTING 83

G | TECHNICAL SUPPORT 87

LIMITED WARRANTY 88

REGULATORY COMPLIANCE 90

1 | INTRODUCTION

If you need to collect bar coded data but don't want to be tied to your mobile

or desktop computer, Socket's Cordless Hand Scanner (CHS) Series 7 with

Bluetooth wireless technology is just what you're looking for. This

innovative device combines the power of laser bar code scanning with the

convenience of Bluetooth wireless technology in a single compact,

lightweight device that is ergonomically designed to fit comfortably in the

palm of your hand.

Bar code scanning is the most efficient way to collect data from a mobile

computer. If the data to be entered is bar coded, using a laser scanner is 50

times faster and 10,000 times more accurate than manual data entry.

Bluetooth wireless technology

transforms how devices connect with

each other, offering you new

possibilities for using your mobile

computer with other devices.

With Socket's Cordless Hand Scanner

(CHS), you can scan bar codes while

connected to the PDA in your pocket or

to your laptop, tablet or desktop

computer located up to 300 feet away

— all without the hassle of cables or the

awkwardness of a protruding antenna.

SCANNER VERSIONS

The CHS Series 7 includes three versions of the scanner.

•The entry-level CHS 7E uses linear CMOS imaging technology.

•The mid-level CHS 7M has a Class 1 laser scanner.

•The performance level CHS 7P features a Class 2 laser scanner and a

ruggedized construction.

ABOUT THE SOFTWARE

SocketScan™enters scanned data directly into any open

Windows or Palm OS program as if the data were manually

typed, so you can use the CHS with your favorite application.

Included is a utility that enables you to configure

Prefix/Suffixes, sounds, and other special settings for the CHS.

Connect!Agent™for Windows Mobile and XP simplifies Bluetooth by

automatically setting up and managing the wireless connection.

Connect!Agent runs in the background, requiring no user interaction.

CHAPTER 1: INTRODUCTION 5

ABOUT COMBINING SCANNING WITH BLUETOOTH

The Cordless Hand Scanner represents an optimal combination of proven

laser bar code scanning and state-of-the-art Bluetooth connectivity. Because

of the problems inherent in the intermittent storage of scanned data in on-

board memory if the Bluetooth connection is lost, the CHS is designed to

operate only when connected to the host, with the powerful Class 1 radio

providing the maximum possible connection range.

The user is advised of the connection status with a single beep when the

CHS connects to the host and a double beep when the connection is closed

or lost. As with any wireless device, connectivity range can be affected by a

variety of environmental variables.

The most likely source of errors in any cordless scanning system is not in

the scanning and decoding process, but in the transmission of the data to the

host. For this reason, the Cordless Hand Scanner features Socket’s

exclusive Error Proof Protocol (patent pending), which ensures that

scanned data is correctly received by the host computer and allows for real-

time validation of data and notifies the user in case of errors.

The beeper and green LED signals provided by the CHS confirm not only a

successful scan but also the successful transmission of the scanned data to

the host. Users familiar with bar code scanning may notice a slight delay

between the successful scan and shut off of the laser, and the beep and

green LED from the CHS confirming completed transmission of the data. In

most instances, this delay is less than 300 ms (milliseconds), but may be

slightly longer as the connectivity range limit is approached.

Because of the two-way transmission verification process, it is possible to

cause communication problems by scanning bar codes as fast as possible.

When this occurs, all transmissions will stop for several seconds before

scanning can be resumed. To prevent this from happening, the user should

wait until the confirming beep is received before scanning the next bar

code.

SYSTEM REQUIREMENTS

Windows Mobile devices should satisfy these minimum requirements:

•Windows Mobile 2003, 2003SE or 5.0

•Any of the following Bluetooth stacks:*

−Broadcom (Widcomm) v1.5 or greater for Windows Mobile 2003/2003SE

−Broadcom (Widcomm) v1.7 or greater for Windows Mobile 5.0

−Microsoft Bluetooth stack for Windows Mobile

−Socket Drakar v1.4 (from Socket SD/CF Connection Kits)

•Software installation requires either ActiveSync 4.0 or greater or

Windows Vista on a host computer.

The CHS Series 7 is also compatible with the Intermec CK30 mobile

computer, which runs Windows CE.NET.

Palm OS devices should satisfy these minimum requirements:

•Palm OS 5.2 or later

•Bluetooth wireless technology

•Software installation requires Palm Desktop Software on a host

computer.

Windows XP computers should satisfy these minimum requirements:

•Windows Mobile XP or XP Tablet Edition

•Any of the following Bluetooth stacks:*

−IVT BlueSoleil version 1.6.1.4 (from Socket CF/USB Connection Kits)

−Microsoft Windows XP Service Pack 2 Bluetooth stack

−Toshiba Bluetooth stack 3.0 or greater

−Broadcom (Widcomm) Bluetooth stack

*Other stacks may be compatible but have not been tested by Socket. For

Windows XP, only the IVT, Microsoft, and Toshiba Bluetooth stacks are

compatible with the optional Socket Connect!Agent software.

For information about using the CHS with Symbian smartphones or RIM

BlackBerry devices, please visit:

www.socketmobile.com/products/bar-code-scanning-data-

collection/series7/

CHAPTER 1: INTRODUCTION 7

For software updates, please visit:

www.socketmobile.com/support/downloads/data-collection/series7/

PACKAGE CONTENTS

The Socket Cordless Hand Scanner package includes these items:

•Socket Cordless Hand Scanner with Bluetooth Wireless Technology

•AC charging adapter with international plugs

•2 NiMH rechargeable AAA batteries

•Lanyard with retractable tether

•Software Installation CD

•Booklets with copyright, warranty, and regulatory compliance

information

PRODUCT REGISTRATION

Socket highly recommends that all customers register their Socket products.

Registered users receive the following benefits:

•Priority for technical support

•Special offers for future products and upgrades

•The latest new product information.

ADDITIONAL DOCUMENTATION

Besides this User’s Guide, Socket also supports the Cordless Hand Scanner

Series 7 with Quick Start Guides and Advanced Programming Guides,

available online at: www.socketmobile.com/support/downloads/data-

collection/series7/?page=Detail

HARDWARE FEATURES

Rechargeable Batteries and AC Adapter

Charge the internal batteries by using the included AC adapter. The adapter

rating is 5V, 2A, positive pole center. A fully charged battery should

provide roughly 8 hours of normal operation.

WARNING: Charge ONLY NiMH batteries in the CHS. Damage may

result if other battery types are charged. Do not store the CHS for more

than 30 days with the batteries installed.

The red Battery Status LED will not function properly if standard AAA non-

rechargeable batteries are being used.

Besides the included AC adapter, you can also recharge the CHS by using

any of the following:

•Socket Mobile Power Pack (available only in the Americas and Asia

Pacific regions). For more information, please visit:

www.socketmobile.com/products/accessories/mobile-power-pack/

•AC and DC adapters of most recent Pocket PCs from Socket, Casio,

Dell, Fujitsu, HP, and Toshiba are also compatible.

Touch Screen Stylus

The CHS features a stylus tip in the tail of the CHS

that you can use Pocket PC and other device touch

screens. The stylus can be removed with small pliers

if desired. Visit the Socket website to purchase

replacement styli.

WARNING: Do not use the stylus if damaged. A

damaged stylus may scratch the display screen

of your computer.

The stylus does not work with XP Tablet computers using Active Matrix

displays.

Status Indicator LED

LED LED Activity Meaning

1 blink per second Bluetooth radio is on, but not

connected.

Bluetooth

Status

(Blue)

1 blink per 5 seconds Bluetooth radio is on, connection

established.

Good Read

(Green)

Green Data successfully scanned and

transmitted to host device.

1 blink per second Less than 20% of battery life

remaining.

Solid red Batteries are charging.

Battery

Status

(Red) Off when connected

to charger Batteries are fully charged.

CHAPTER 1: INTRODUCTION 9

Status Indicator Beeps

The scanner beeps to signal the Bluetooth connection status. You can also

have the scanner beep to indicate scanned data reaching the host device.

LED Beep Pattern Meaning

1 beep Connection to host device has begun.

Bluetooth

Status

(Blue)

2 beeps Connection to host device has ended.

Good Read

(Green)

1 beep Data was successfully scanned and

transmitted to host device.

Otros manuales para CHS Series 7

Tabla de contenidos

Otros manuales de Lector de código de barras de Socket

Socket

Socket Gun Scanner (GS) 2X (Xtreme Performance) Manual de usuario

Socket

Socket PocketPak Manual de usuario

Socket

Socket DuraScan D730 Manual de usuario

Socket

Socket 800 SERIES Manual de usuario

Socket

Socket CHS Series 7 Manual de usuario

Socket

Socket CF RFID Manual de usuario

Socket

Socket DURASCAN D760 Instrucciones de funcionamiento

Socket

Socket CHS 7Ci Manual de usuario

Socket

Socket CHS 7Ci Manual de usuario

Socket

Socket CHS 7Mi Manual de usuario

Socket

Socket 8 Series Manual de usuario

Socket

Socket SocketScan S730 Manual de usuario

Socket

Socket DuraSled DS800 Series Manual de usuario

Socket

Socket CHS 7Ci Manual de usuario

Socket

Socket XtremeScan Manual de usuario

Socket

Socket SOCKETSCAN S800 Manual de usuario

Socket

Socket CHS 7Qi Manual de usuario

Socket

Socket 5 Series Manual de usuario

Socket

Socket 2DSC 5 series Manual de usuario

Socket

Socket In-Hand Scan Card Manual de usuario

Socket

Socket SocketScan S700 Manual de instalación

Socket

Socket CHS 7Xi Manual de usuario

Socket

Socket SD Scan Card 3E Manual de usuario

Socket

Socket DURACASE 800 Series Manual de usuario

Manuales populares de Lector de código de barras de otras marcas

POSMicro

POSMicro Datalogic PowerScan D7100 Manual de usuario

Marson

Marson MT780 Guía de configuración rápida

NCR

NCR RealPOS Manual de usuario

Motorola

Motorola SE3300 Guía de configuración rápida

Element

Element P130BT Manual de usuario

Motorola

Motorola Symbol LS3008 Manual de instalación y operación

Meec tools

Meec tools OBD-II / VAG Manual de usuario

SICK

SICK CLP 100 Manual de usuario

Royal Tag SA

Royal Tag SA I-Read Manual de usuario

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manual de usuario

Meteor

Meteor 8310 Manual de usuario

Denso

Denso BHT-500B Manual de usuario

Datalogic

Datalogic Heron HD3130 Manual de usuario

Motorola

Motorola MP6000 Instrucciones de montaje

Newland

Newland NLS-HR15-BT Manual de usuario

ARTDEV

ARTDEV AS-1310 Manual de usuario

Aopos

Aopos AS290 Manual de usuario

ENS

ENS 367-5455 Manual de usuario