Socket CHS 7Ci Manual de usuario
COMMAND BARCODES
1D IMAGER MODELS - 7Ci, 7Di, D700, S800
This document pertains to the following 7Ci, 7Di, D700, S800:
The part number (P/N) is labeled inside the battery compartment for the CHS 7 Series.
D700
D700
Model P/N
D700 Gray 8550-00094
D700 Safety Green
D700 Caution Cone Orange
Model P/N
7Di Gray 8550-00065
Model P/N
7Ci Blue 8550-00071
7Ci Gray 8550-00062
7Ci Green 8550-00088
7Ci Red 8550-00070
7Ci White 8550-00073
7Ci Yellow 8550-00068
Model P/N
S800 Black 8550-00069
Di
Ci
TABLE OF CONTENTS
Advanced Users Only —8
Apple iOS Onscreen Keyboard —8
Automatic Reconnection Settings —11
Bluetooth Connection Mode —4
Bluetooth Connection Mode —10
Bluetooth Connection Roles —10
Data Mode - For SPP Mode Only —11
Data Sufx —5
Factory Defaults —3
HID Keyboard Language Settings —7
Power Button Double key Press —12
Rumble/Beep Modes —6
Scanner Engine Command Barcodes —13
INSTRUCTIONS: Scan command barcode(s) to quickly congure the barcode scanner.
Many of the command barcodes only work with a scanner in a particular Bluetooth mode as indicated
by the header row of each table.
Make sure the scanner is not connected to a host computer or device before scanning a
command barcode!
To use the scanner on multiple hosts, perform the unpair sequence.
1.Power on the scanner.
2.Press and hold down the trigger button.
3.Press and hold down the power button.
4.After you hear 3 beeps, release both buttons.
By default, the scanner is in Basic Mode (HID) as a Keyboard device.
For scanners in Application Mode (SPP) or Application Mode (MFi-SPP), you can alternatively cong-
ure some settings by using the Scanner Settings app. You can download the app from iTunes, and Google
Play.
3
FACTORY DEFAULTS
Factory Reset
Congures the CHS to revert all settings to factory defaults. The CHS powers off after scanning this bar-
code.
#FNB00F0#
4
BLUETOOTH CONNECTION MODE
All Bluetooth connection modes OK.
Scan command barcode(s) to quickly congure the scanner. By default, the scanner is in Basic Mode (HID)
as a Keyboard device.
IMPORTANT! Make sure the scanner is not connected to a host computer/device before scanning a com-
mand barcode!
Basic Mode (HID) (default)
Congures the scanner to Human Interface Device (HID) mode. The scanner will be discoverable as a Key-
board to other Bluetooth devices.
Required for Apple iOS, Mac OS.
#FNB00F40001#
HID-Peripheral
Congures the scanner as a Peripheral class device (optional for Windows and Android).
#FNB0001000500#
Application Mode (SPP)
Changes the scanner to Bluetooth Serial Port Prole (SPP) mode (optional for Windows and Android).
#FNB00F40000#
Application Mode (MFi-SPP)
Changes the scanner to Application Mode (MFi-SPP) (equivalent to SPP mode).
#FNB00F40002#
5
All Bluetooth connection modes OK.
You can congure the scanner to automatically add a sufx and/or prex to each scan of data.
Note: Scanning multiple commands in a single instance will overwrite (not append) the previous
command.
Sufx – Carriage Return (default)
Congures the scanner to add a carriage return after decoded data.
#FNB00F50BC6048FFEE1680DE040000#
Sufx – Tab
Congures the scanner to add a tab after decoded data
#FNB00F50BC60408FFEE016809EB040000#
Sufx – Carriage Return & Line Feed
Congures the scanner to add a carriage return and line feed after decoded data.
#FNB00F509C60408FFEE01EB010000#
Data As Is
Congures the scanner to return only the decoded data (i.e., no prex or sufx).
#FNB00F509C60408FFEE01EB00000#
DATA SUFFIX
6
All Bluetooth connection modes OK.
IMPORTANT! Make sure the scanner is not connected to a host computer before scanning a command bar-
code.
Vibrate “On”
Enables scanner to vibrate to indicate successful scan
#FNB01310001000100FA0000#
Vibrate “Off”
Disables scanner from vibrating to indicate successful scan
#FNB013100010000#
Beep “On”
Enables scanner to beep to indicate successful scan
#FNB01190E000100030078004B#
Beep “Off”
Disables scanner from beeping to indicate successful scans
#FNB01190E000100000078004B#
RUMBLE/BEEP MODES
7
Scan only with scanner in Basic Mode (HID).
Scan barcode to enable language.
English (Default)
#FNB01430001#
French
#FNB01430002#
German
#FNB01430003#
Spanish
#FNB01430004#
HID KEYBOARD LANGUAGE SETTINGS
8
Scan only with scanner in Basic Mode (HID).
Apple iOS Onscreen Keyboard and Beep Enabled (Default)
Congures the scanner to activate the iOS onscreen keyboard when connected to an iOS device and the
scanner power button is double-pressed.
Disable both Onscreen Keyboard and Beep
#FNB013A0000000000000000000000000000#
Enable Beep
#FNB013A0500000000000000000000000000#
Disable Beep
#FNB013A0100000000000000000000000000#
APPLE iOS ONSCREEN KEYBOARD
ADVANCED USERS ONLY
All Bluetooth Connection Modes OK.
*Barcodes only work for 7M and above. For 7M and below refer to page 4.
Basic Mode (HID) (default)
Congures the scanner to Basic Mode (HID) Human Interface Device. The scanner will be discoverable as a
Keyboard to other Bluetooth devices.
Required for Apple iOS, Mac OS, Nokia E71.
#FNB00F40001#
9
Basic Mode (HID) Keyboard (default)
Changes a scanner in HID-Peripheral mode to HID-Keyboard mode.
Required for Mac OS and Nokia E71, optional for Apple iOS.
#FNB0001000540#
Basic Mode (HID) Peripheral
Changes a scanner in HID-Keyboard mode to HID-Peripheral mode (optional for Windows and Android).
#FNB0001000500#
Application Mode (SPP)
Congures the scanner to Serial Port Prole (SPP) mode.
Required for BlackBerry, optional for Windows and Android.
#FNB00F40000#
Application Mode (MFi-SPP)
Changes a scanner to Application Mode (MFi-SPP).
Required for Apple iOS applications developed with SocketScan 10 SDK.
#FNB00F40002#
10
All Bluetooth Connection Modes OK.
Advanced users only.
SPP Acceptor Mode
Changes the scanner to Bluetooth Serial Port Prole (SPP) mode as an acceptor (waits for computer / de-
vice to initiate connection).
#FNC SPP Acceptor 000000000000#
SPP Initiator Mode
Changes the scanner to Bluetooth Serial Port Prole (SPP) mode as an initiator. Use barcode generating
software or website (e.g., http://barcode.tec-it.com) to create a barcode with the following data:
#FNC SPP Initiator aabbccddeeff#
Where aabbccddeeff is the Bluetooth Device Address of the computer / device you want to connect the
scanner to.
Recommended barcode (module) width: 2-3cm
N/A
BLUETOOTH CONNECTION MODE
BLUETOOTH CONNECTION ROLES
Scan only with scanner in Application Mode (SPP) or Application Mode (MFi-SPP)
Advanced users only.
Acceptor (default)
Congures the scanner to accept a Bluetooth connection puts the scanner in discoverable mode.
#FNA#
Initiator
Congures the scanner to initiate a connection to a computer/device with the Bluetooth Device Address
specied in the barcode.
The barcode must be formatted in Code 128 and contain the data #FNIaabbccddeeff# such that aabbccd-
deeff is the Bluetooth Device Address of the computer/device you want to connect to the scanner. Re-
quired for Windows when using SPP mode.
You must create a custom barcode for each computer/device that you want to connect to the scanner.
Use barcode generating software or website (e.g., http://barcode.tec-it.com))
Otros manuales para CHS 7Ci
6
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Lector de código de barras de Socket
Socket
Socket 7Qi Manual de usuario
Socket
Socket Wand Scanner 2E Manual de usuario
Socket
Socket CHS 7Mi Manual de usuario
Socket
Socket 8 Series Manual de usuario
Socket
Socket SocketScan S700 Manual de instalación
Socket
Socket PocketPak Manual de usuario
Socket
Socket SocketScan S700 Manual de usuario
Socket
Socket CHS Series 7 Manual de usuario
Socket
Socket 8 Series Manual de usuario
Socket
Socket CHS Series 7 Manual de usuario
Socket
Socket 9M Manual de usuario
Socket
Socket CHS 7M Manual de usuario
Socket
Socket SocketScan 800 Series Manual de usuario
Socket
Socket CHS 7Ci Manual de usuario
Socket
Socket DuraScan D745 Manual de usuario
Socket
Socket CHS 7Xi Manual de usuario
Socket
Socket D860 Instrucciones de funcionamiento
Socket
Socket CHS Series 7 Guía de solución de problemas
Socket
Socket 800 SERIES Manual de usuario
Socket
Socket CHS 7Mi Manual de usuario
