Socket 8 Series Manual de usuario
ATTACHABLE
SERIES 8
QUICK START GUIDE
www.socketmobile.com
Bluetooth Cordless Barcode Scanner
PACKAGE CONTENTS
©2015 Socket Mobile, Inc. All rights reserved. Socket, the Socket logo, and
SocketScan are registered trademarks or trademarks of Socket Mobile, Inc. The
Bluetooth word mark and logo are registered trademarks of the Bluetooth SIG,
Inc. USA, and any use by Socket Mobile, Inc. is under license. All other
trademarks and trade names contained herein may be those of their respective
owners.
Thank you for choosing Socket Mobile!
Let’s get started!
Lanyard USB Charging CableCHS Series 8
mobile
®
mobile
®
PRODUCT INFORMATION
Micro USB Port Lanyard Attach
Top LED
Side LED
Power button
Scan Trigger button
3
CHARGE THE CORDLESS HAND SCANNER (CHS)
1. Insert charging cable into an AC charging adapter (not included
- most smartphones and tablets come with AC Adapters that
look something like this.)
2. Plug charging adapter (not included) into an outlet.
3. Insert Micro USB into the CHS USB port.
4. The CHS will beep twice indicating adequate power is being supplied
to the unit.
4
Side LED status
•Red = Charging
•Green = Fully charged
Note: The CHS comes with a pre-installed rechargeable Lithium Ion bat-
tery, the initial full charging of the battery can take up to 4 hours.
4 Hours
Power On
Press and hold down the small power button on the side until the CHS
beeps twice (low-high tone).
m o b ile
®
The CHS can connect to your device using one of the following mode:
Bluetooth Connection Proles
Bluetooth Mode Description
HID (Default)
Human Interface
DeviceProle
• “NO” software installation needed.
• Connects to most devices.
• Good for barcodes containing small amounts of data.
• Scanner appears like a keyboard.
SPP
Serial Port
Prole
• Software installation required.
• Moreefcientdatacommunicationsforbarcodescon-
taining lots of data.
iOS
AppleSpecic
SerialProle
• AppleMFItestedandcertied.
• An app is required.
• If you have an application that supports Socket Mobile
Scanners this is the mode you want to use.
BLUETOOTH CONNECTION METHODS
5
BLUETOOTH CONNECTION METHODS
Connection Options Based on Operating Systems
Operating
Systems
(OS)
Devices Blue-
tooth
HID
Support
Blue-
tooth
SPP
Support
Bluetooth
Apple
Serial
Specic
(iOS
Mode)
Android Android 2.1 &later Yes Yes No
Apple iOS iPod, iTouch, iPhone, &iPad Yes No Yes
Windows
Mobile
Windows Mobile 6.x Yes Yes No
Windows PC Windows 7, 8 Yes Yes No
Mac OS Mac OS X 10.4 to 10.X
Mac Books, Mac Mini, &iMac
Yes No No
Note: To switch from one mode to the other you must remove the
pairing information (see unpairing procedure on page 16) from both
devices - host computer and the CHS.
The CHS will unpair and automatically power off. The next time you
power on the CHS, it will be discoverable.
Select the appropriate mode and pair with the second host device.
6
HID MODE
Connect Android Device in HID Mode
1. Power on the CHS. Make sure the CHS is discoverable (unpaired).
2. Touch Home | Menu | Settings | Wireless &Networks |
Bluetooth settings
3. Make sure the device has Bluetooth “On”. Scan for devices.
4. In the list of found devices, select Socket CHS [xxxxxx]. Tap Pair.
5. The CHS will connect to the Android device.
6. The CHS will beep once after it has connected and is ready to scan
barcodes.
Connect Apple iOS Device or Mac OS Device HID Mode
In this mode the scanner works and behaves just like a keyboard.
Therefore, CHS will work with Safari, Notes, and any other applications
that supports an active cursor.
1. Power on the CHS. Make sure the CHS is discoverable (unpaired).
2. Start a Bluetooth device search.
• iOS: Tap Settings | General | Bluetooth. Turn on Bluetooth. A
Bluetooth device search will begin.
• Mac OS: Click System Preferences | Internet &Wireless | Bluetooth.
In Bluetooth preferences, select the On checkbox. Click Set up New
Device... A Bluetooth device search will begin.
3. In the device list, tap on CHS [xxxxxx]. Tap Pair.
4. The CHS will connect to the Apple device.
5. The CHS will beep once after it has connected and is ready to scan
barcodes.
7
HID MODE
Connect Windows PC
Power on the CHS. Make sure the CHS is discoverable (unpaired).
1. Use your computer’s Bluetooth Settings to connect to the CHS.
2. Open Devices and Printers and select “Add a device”.
3. In the device list, select Socket CHS [xxxxxx]. Click Next.
4. If a passkey is requested, enter 0000 (four zeroes). Click OK.
Or Pair Now.
5. Follow the remaining screens to complete the wizard.
Note:OnsomecomputerstheCHSwillhavetobeconguredasHID
Periferal. Please refer to the User Guide to see this special barcode.
The User Guide at Socket Mobile’s support web page.
Note: For Windows Mobile refer to the User Guide at Socket Mobile’s
support web page.
8
SPP MODE
9
Connect Android device in SPP Mode using EZ Pair
1. Go to Google Play Store, search for “SocketScan 10”.
2. Download &install. Follow the on screen instructions.
Note: If prompted, allow the app to access your Bluetooth settings /
USB storage / SD card / Coarse location.
3. Make sure Bluetooth is turned on.
4. Open SocketScan 10 application.
5. When prompted to set SocketScan 10 as the keyboard language, tap
Back .
6. Go to Settings / Language and Input
7. Under Keyboard Settings, select SocketScan 10.
8. Open SocketScan 10 on your device.
9. When prompted to enable SocketScan 10 as Input Method,
tap Back .
10.Tap the Menu icon, then select Input Method.
11.On the next screen, select SocketScan 10 as input method.
12. Power on the CHS. Make sure the CHS is discoverable (unpaired).
13. In SocketScan 10, tap the Menu icon then select Socket EZ Pair.
14.Scan the barcode on the screen to switch or set your scanner in SPP
mode. The CHS will beep 3 times.
SPP MODE
10
Connect Android device in SPP Mode
15.Select [On screen] button.
16.On the next screen, tap on the 8Ci [1D Scanner] or 8Qi [2D Scanner]
button that is appropriate for your scanner button.
17.Scan the barcode on the screen. The CHS will beep 3 times.
18.Whennotiedofapairingrequest,swipethenoticationdownthen
tap Pairing request.
19.On the next screen, tap Pair.
20.The CHS will beep once to indicate connected state and is ready to
scan barcodes. Tap Back to close Socket EZ Pair.
21.If you are connecting a scanner which is not registered, a CHS
registration icon will appear on top of the screen. Swipe the icon
down to open the registration pages. Follow the instructions
to register your CHS. Socket Mobile highly recommends that all
customers register their products, but registration is not necessary.
Now you are ready to scan barcodes!
Note: If you are unable to scan the barcode on screen, please refer to
the alternative Bluetooth Method to connect the CHS in the User Guide
at Socket Mobile’s support web page.
Otros manuales para 8 Series
1
Tabla de contenidos
Otros manuales de Lector de código de barras de Socket
Socket
Socket CHS Series 7 Manual de usuario
Socket
Socket CHS Series 7 Manual de usuario
Socket
Socket CHS 7Mi Manual de usuario
Socket
Socket SocketScan 700 Series Manual de usuario
Socket
Socket SOCKETSCAN S800 Manual de usuario
Socket
Socket 6410-00233 Manual de usuario
Socket
Socket CHS 7Xi Manual de usuario
Socket
Socket 7Qi Manual de usuario
Socket
Socket DuraScan 700 Series Manual de usuario
Socket
Socket CHS 7Ci Manual de usuario
Socket
Socket CHS 7Ci Manual de usuario
Socket
Socket SocketScan 700 Series Manual de usuario
Socket
Socket CHS Series 7 Guía de solución de problemas
Socket
Socket DURASCAN D740 Manual de usuario
Socket
Socket CHS 7Mi Manual de usuario
Socket
Socket D700 Instrucciones de funcionamiento
Socket
Socket PocketPak Manual de usuario
Socket
Socket CHS 7M Manual de usuario
Socket
Socket SD Scan Card 3E Manual de usuario
Socket
Socket 2DSC 5 series Manual de usuario
