SIIG Single-Serial PC Card Manual de usuario
1
Single-Serial PC Card
Quick Installation Guide
04-0254C
Introducing the Single-Serial PC Card
The Single-Serial PC Card adds one high-speed serial port
(RS232) into your notebook computer to connect various
types of serial devices.
Keys Features and Benefits
• Works with notebook computers with one Type II/
III PC Card/CardBus slot
• Fast 16550 UART supports baud rates up to
115.2Kbps
• Built-in16-byteFIFObuffertospeedupdatatransfer
• Provides one RJ45-to-serial (DB9) removable cable
for device connections
• Works with various types of RS232 serial devices
including modems, PDAs, label printers, bar code
scanners, digital cameras, and more
System Requirements
•Pentium or equivalent notebook computer with an
available PC Card slot
•Windows 98/98SE/ME/2000/XP/Server 2003
Package Contents
•Single-Serial PC Card
•RJ45 to 9-pin serial port cable
•Driver CD
•This quick installation guide
2
Hardware Installation
General instructions for installing the card are provided
below. Since the design of notebook computers may
vary, refer to your system’s reference manual for further
information, if needed.
1. Power off your notebook computer and any other
connected peripheral devices.
2. Insert the PC Card into the PC Card slot of your
notebook computer with its 68-pin connector facing
the slot. Make sure it is inserted all the way in for a
solid connection.
3. Plug the RJ45-to-9-pin serial port cable into the
Single-Serial PC Card.
4. Power on your notebook computer.
Figure 1: Inserting PC Card
3
Driver Installation
Windows 98/98SE
1. At the Add New Hardware Wizard, click Next.
2. Select Search for the best driver for your device
(Recommended), then click Next.
3. InsertthedriverCD,checkCD-ROMdrives,uncheck
the other boxes and click Next.
4. Click Next, then Finish.
5. Restart Windows to complete the installation.
Windows ME
1. At the Add New Hardware Wizard, choose
Automatic search for a better ...
2. Insert the driver CD, click Next, then click Finish.
3. Restart Windows to complete the installation.
Windows 2000
1. At the Found New Hardware Wizard, click Next.
2. Select Search for a suitable driver for my device
(recommended), and click Next.
3. Check CD-ROM drives, uncheck the other boxes,
and click Next.
4. Click Next and Finish.
5. Restart Windows to complete the installation.
4
Windows XP/Server 2003
1. At the Found New Hardware Wizard,
XP (w/SP1 or earlier)/Server 2003: continue to step #2
XP (w/SP2 or later)/Server 2003 (w/ SP1 or later): select
No, not at this time, then click Next.
2. Choose Install from a list or specific location
(Advanced),then click Next.
3. InsertthedriverCD,checkSearch removable media
(folppy, CD-ROM...), uncheck the other check box
and click Next.
4. If the Hardware Installation window pops up, click
Continue Anyway, then Finish. Our driver has been
testedfor stability and compatibility.
5. Restart Windows to complete the installation.
To verify successful driver installation:
1. Check Device Manager to verify successful driver
installation.
Windows 98/98SE/ME: From the main desktop, right
click My Computer, then click Properties. Click
Device Manager tab.
Windows 2000/XP/Server 2003: Right click My
Computer, then click Manage. Click Device
Manager.
2. Double click Ports (Com&LPT), find PCMCIA
RS232-550..., and double click it to display it's
properties. In the next window This device is
working properly willdisplaywhenthe installation
is successful.
5
Changing COM Port Address
Some serial devices need a specific COM port in order to
work. If your serial device works properly, do not
change this setting. This option is only for Windows
2000/XP/Server 2003 respectively.
1. From the Device Manager window double click
Ports (COM & LPT), then double click PCMCIA
RS232-550...
2. Click Port Settings tab and click Advanced.
3. Click the down arrow that is next to the COM Port
Number box and select a COM port that is not in
use. Click OK.
4. Click OK, then close Device Manager to save the
changes.
6
Blank Page
7
Technical Support and Warranty
QUESTIONS? SIIG’s Online Support has answers!
Simply visit our website at www.siig.com and click on Support.
Our online support database is updated daily with new drivers
and solutions. Answers to your questions could be just a few clicks
away. Youcan also submit questionsonlineand one of ourtechnical
support analysts will promptly respond.
A lifetime manufacturer warranty supplied with this product is
offered by SIIG, Inc. Please see SIIG website for more warranty
details. If you should happen to encounter any problems with this
product, please follow the procedures below.
If it is within the store's return policy period, please return the
product to the store where you purchased from.
If your purchase has passed the store's return policy period, please
follow these steps to have the product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then RMA to submit a
request to SIIG RMA. If the product is determined to be
defective,anRMAnumberwillbeissued. SIIGRMAdepartment
can also be reached at (510)413-5333.
Step 2: After obtaining an RMA number, ship the product.
•Properlypack the product forshipping. Allsoftware, cable(s)
andany other accessoriesthatcame with theoriginalpackage
must be included.
•Clearly write your RMA number on the top of the returned
package. SIIGwillrefuse to acceptanyshippingpackage,and
will not be responsible for a product returned without an
RMA number posted on the outside of the shipping carton.
•YouareresponsibleforthecostofshippingtheproducttoSIIG
at the following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538
RMA #:
•SIIG will ship the repaired or replaced product via Ground
in the U.S and International Economy outside of the U.S at
no cost to the customer.
Single-Serial PC Card is a trademark of SIIG, Inc.
SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered
trademarksofMicrosoftCorporation. PentiumisaregisteredtrademarkofIntelCorporation. Other
names used in this publication are for identification only and may be trademarks of their respective
companies.
July, 2006 Copyright ©2006 by SIIG, Inc. All rights reserved.
PRODUCT NAME
Single-Serial PC Card
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS
B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Ave.
Fremont, CA 94538-3152
About SIIG, Inc.
Foundedin1985,SIIG,Inc.isaleadingcomputerupgrademanufacturer
of I/O connectivity products, including PCI & ISA serial and parallel
ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b),
Networking,Sound Cards,andother accessories. SIIGis the premier
one-stop source of upgrades.
SIIGproductsoffercomprehensiveusermanuals, many user-friendly
features, and are backed by an extensive manufacturer warranty.
High-quality control standards are evident by the overall ease of
installation and compatibility of our products, as well as one of the
lowest defective return rates in the industry. SIIG products can be
foundin computerretailstores, mailorder catalogs, ande-commerce
sitesintheAmericasandtheUK,aswellasthroughmajordistributors,
system integrators, and VARs.
Tabla de contenidos
Otros manuales de Hardware de computadora de SIIG
SIIG
SIIG Low Profile POS 2000RJ Manual de usuario
SIIG
SIIG SC-SAE512-S1 Manual de usuario
SIIG
SIIG ExpressCard/54 CF R/W Manual de usuario
SIIG
SIIG IO1037 Manual de usuario
SIIG
SIIG CyberParallel Dual Manual de usuario
SIIG
SIIG CyberParallel Dual Manual de usuario
SIIG
SIIG JU-P40412-S1 Manual de usuario
SIIG
SIIG JU-91RW12-S4 Manual de usuario
SIIG
SIIG eSATA II ExpressCard Manual de usuario
SIIG
SIIG JJ-EC1012-S1 Manual de usuario
SIIG
SIIG FireWire Home DV Kit Manual de usuario
SIIG
SIIG FireWire Dual-Port CardBus Manual de usuario
SIIG
SIIG Serial ATA 4-Channel PCI Manual de usuario
SIIG
SIIG CyberParallel Dual Manual de usuario
SIIG
SIIG JJ-E01111-S1 Manual de usuario
SIIG
SIIG CyberSerial ExpressCard Manual de usuario
SIIG
SIIG Cyber PCI I/O Manual de usuario
SIIG
SIIG AV-GM0AK3-S1 Manual de usuario
SIIG
SIIG JJ-E02111-S1 Manual de usuario
SIIG
SIIG Hi-Speed ExpressCard CF R/W Manual de usuario
Manuales populares de Hardware de computadora de otras marcas
EMC2
EMC2 VNX Series Manual del propietario
Panasonic
Panasonic DV0PM20105 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manual de usuario
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manual de usuario
Raidon
Raidon iT2300 Manual de usuario
National Instruments
National Instruments PXI-8186 Manual de usuario
