SIIG JU-PCM422-S2 Manual de usuario

Hi-Speed USB 4-Port CardBus

Quick Installation Guide

04-0255E

Introducing the Hi-Speed USB 4-Port

CardBus

The Hi-Speed USB 4-Port CardBus adds high-speed USB

2.0 interface to your notebook computer. A switching

power adapter is not required to provide standard power

output for each port. It supports high-speed (480 Mbps),

full-speed (12 Mbps), and low-speed (1.5 Mbps) data

transfer modes.

KeyFeaturesandBenefits

• Compliant with USB specifications revision 2.0

• PCMCIA Cardbus Interface with Power

Management

• Supports simultaneous operation of multiple high-

speed USB 2.0 and USB 1.1 devices

• Hot-swapping feature allows you to connect/

disconnect USB devices without first turning your

notebook computer off

• Works with a various type of USB 2.0 and USB 1.1

devices simultaneously including hubs, removable

drives, digital cameras, scanners, CD-RWs,

DVD-RAMs, PC video cameras, printers, CF/SM/

MMC/SD/MemoryStickmemorycardreaders,and

Note: USB 1.1 devices are limited to USB 1.1 speeds

evenwhentheyareconnectedtoUSB 2.0hostadapter

or USB 2.0 hubs.

SystemRequirements

•Pentium or equivalent notebook computer with an

available CardBus Type II slot

•Windows®2000 SP4/XP (32-/64-bit)/Server 2003

(32-/64-bit)/Vista (32-/64-bit)

Mac

•Power Book G3 or later with an available CardBus

Type II slot

•Mac OS X v10.2.8 or later

PackageContents

•Hi-Speed USB 4-Port CardBus

•Quick installation guide

Hardware Installation

Note: A switching power adapter is not required to

provide standard power output for each port. Certain

high performance USB devices require extra power

output from the ports, an optional power adapter, with

an output of 5V DC, 2.0A and positive inside polarity,

can be used.

Important: Make sure the power supply is connected to

the Hi-Speed USB 4-Port CardBus before installing into

your notebook computer.

1. Power off your notebook computer and any other

connected peripheral devices.

2. Connect the optional switching power adapter to

the Hi-Speed USB 4-Port CardBus, then plug the

switching power adapter into an appropriate power

source.

3. Insert the PC Card into the Type II PC Card slot of

your notebook computer with its 68-pin connector

facing the slot. Make sure it is inserted all the way in

for a solid connection.

4. Power on your notebook computer.

Figure 1. Inserting the PC Card

Driver Installation

Windows

Windows 2000 SP4, XP, Server 2003 and Vista will detect

andinstallthedrivers automatically. Noadditional driver

is necessary.

ToVerifyWindowsDriverInstallation

1. Check Device Manager to verify successful driver

installation.

Windows 2000/XP/Server 2003: Right click My

Computer, click Manage, then click Device

Manager.

Windows Vista™: Right click Computer, click

Manage,click Continue,thenclickDeviceManager.

2. The drivers for this controller show up differently

under different versions of Windows. Please refer

to the correct Windows version to verify.

Windows 2000, XP, Server 2003

Under Universal Serial Bus controllers:

- NEC PCI to USB Enhanced Host Controller...

- NEC PCI to USB Open Host Controller

- USB Root Hub (USB 2.0 Root Hub in 2000)

- USB Root Hub

Windows Vista™

Under Universal Serial Bus controllers:

- Standard Enhanced PCI to USB...

- NEC PCI to USB Open Host Controller

- USB Root Hub

Mac OS (v10.2.8) or later

Mac OS X have built-in driver support for this controller.

Just install the board and Mac OS will automatically

detect and install the correct drivers for it. No additional

driver is necessary.

To Verify Mac OS Driver Installation

Mac OS X (v10.2.8) or later:

Since we didn't load any additional driver under

these Mac OSs, the only way to verify the board

works is actually connecting devices to the USB

ports.

Blank Page

Technical Support and Warranty

QUESTIONS? SIIG’sOnline Support hasanswers! Simplyvisitour

web site at www.siig.com and click Support. Our online support

database is updated daily with new drivers and solutions. Answers

toyour questions could bejust a few clicks away. Youcan also submit

questions online and a technical support analysts will promptly

respond.

SIIGoffersalifetimemanufacturerwarrantywiththisproduct. Please

see our web site for more warranty details. If you encounter any

problems with this product, please follow the procedures below.

A) If it is within the store's return policy period, please return the

product to the store where you purchased from.

B) Ifyour purchase has passedthe store's returnpolicy period, please

follow these steps to have the product repaired or replaced.

Step 1: Submit your RMA request.

Go to www.siig.com, click Support, then RMA to submit a

request to SIIG RMA. If the product is determined to be

defective, an RMA number will be issued. SIIG RMA department

can also be reached at (510) 413-5333.

Step 2: After obtaining an RMA number, ship the product.

•Properly pack the product for shipping. All software, cable(s)

and any other accessories that came with the original package

must be included.

•Clearly write your RMA number on the top of the returned

package. SIIG will refuse to accept any shipping package, and

will not be responsible for a product returned without an

RMA number posted on the outside of the shipping carton.

•You are responsible for the cost of shipping. Ship the product

to the following address:

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

RMA #:

•SIIG will ship the repaired or replaced product via Ground

in the U.S. and International Economy outside of the U.S. at

no cost to the customer.

Hi-Speed USB 4-Port CardBus is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered

trademarks of SIIG, Inc. Microsoft, Windows and Windows Vista are registered trademarks of

Microsoft Corporation. Mac and Mac OS are trademarks of Apple Computer. Pentium is a registered

trademark of Intel Corporation. Other names used in this publication are for identification only and

maybetrademarksoftheirrespectivecompanies.

About SIIG, Inc.

Foundedin1985,SIIG,Inc.isaleadingcomputerupgrademanufacturer

of I/O connectivity products, including PCI & ISA serial and parallel

ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b),

networking, sound cards, and other accessories. SIIG is the premier

one-stop source of upgrades.

SIIGproductsoffercomprehensiveusermanuals,manyuser-friendly

features, and are backed by an extensive manufacturer warranty.

High-quality control standards are evident by the overall ease of

installation and compatibility of our products, as well as one of the

lowest defective return rates in the industry. SIIG products can be

found in computer retail stores, mail order catalogs, through major

distributors, system integrators, and VARs in the Americas and the

UK, and through e-commerce sites.

PRODUCT NAME

Hi-Speed USB 4-Port CardBus

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS

B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCC COMPLIANCE STATEMENT:

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

Tabla de contenidos

Otros manuales de Hardware de computadora de SIIG

SIIG

SIIG DP PCI-to-PS/2 Manual de usuario

SIIG

SIIG DP FireWire 800 3-Port PCIe Manual de usuario

SIIG

SIIG NN-403P12 Manual de usuario

SIIG

SIIG JU-2NE012 Manual de usuario

SIIG

SIIG FireWire Dual-Port CardBus Manual de usuario

SIIG

SIIG Single-Serial PC Card Manual de usuario

SIIG

SIIG NN-EC2822-S1 Manual de usuario

SIIG

SIIG Serial ATA PCI Manual de usuario

SIIG

SIIG SIIG 2-Port Serial 950-Value Manual de usuario

SIIG

SIIG SC-SAEE12-S1 Manual de usuario

SIIG

SIIG CE-ED0011-S1 Manual de usuario

SIIG

SIIG FireWire 800 ExpressCard Manual de usuario

SIIG

SIIG NN-EC2812-S1 Manual de usuario

SIIG

SIIG NN-PC8312-S2 Manual de usuario

SIIG

SIIG DP SoundWave 4 Channel PCI Manual de usuario

SIIG

SIIG ID-P40411-S1 Manual de usuario

SIIG

SIIG SATA II-150 PCI Manual de usuario

SIIG

SIIG CyberParallel Dual Manual de usuario

SIIG

SIIG AV-GM0AK3-S1 Manual de usuario

SIIG

SIIG NN-PCMM12-S3 Manual de usuario

SIIG

SIIG SC-SAE312-S3 Manual de usuario

SIIG

SIIG DP FireWire 800 PCIe Manual de usuario

SIIG

SIIG ExpressCard/54 CF R/W Manual de usuario

SIIG

SIIG USB 2.0 Bay Reader/Writer+Floppy Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario