Siemens SIMATIC ET 200eco PN Documento técnico

Equipment Manual

I/O device digital outputs

DQ 8x24VDC/0.5A M12-L 8xM12

03/2023Edition

ET 200eco PN M12-L

support.industry.siemens.com

SIMATIC

(6ES7142-6BG00-0BB0)

Guide to ET 200eco PN M12-L 1

Product overview 2

Wiring 3

PROFINET IO 4

EtherNet/IP 5

Modbus TCP 6

Technical specifications 7

Dimension drawing A

Parameter data record B

SIMATIC

ET 200eco PN

I/O device digital outputs

DQ 8x24VDC/0.5A M12-L 8xM12

(6ES7142-6BG00-0BB0)

Equipment Manual

03/2023

A5E46570894-AD

Siemens AG

Digital Industries

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E46570894-AD

Ⓟ 03/2023 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended or

approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of SiemensAG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

I/O device digital outputs DQ 8x24VDC/0.5A M12-L 8xM12 (6ES7142-6BG00-0BB0)

Equipment Manual, 03/2023, A5E46570894-AD

Preface

Purpose of the documentation

This equipment manual supplements the ET200ecoPNM12-L Distributed I/O System

(https://support.industry.siemens.com/cs/ww/en/view/109778292) system manual. Functions

that relate in general to the distributed I/O devices ET200ecoPNM12‑L are described in this

system manual.

The MultiFieldbus (https://support.industry.siemens.com/cs/ww/en/view/109773209)

Function Manual describes general MultiFieldbus functions. This equipment manual describes

the specific adaptations for this I/O device.

The information provided in this equipment manual and in the system manual and the

function manuals supports you in commissioning the ET200ecoPNM12‑L distributed I/O

devices.

Changes compared to the previous version

This manual contains the following changes/additions compared to the previous version:

•Supplement to section Parameter data record (Page 63)

•Technical specifications (Page 55) Updated

Conventions

Also observe notes marked as follows:

NOTE

A note contains important information:

• On the product described in the documentation

• On handling the product

• On the part of the documentation to which particular attention is paid

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions constitute one element of such a concept.

Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be connected

to an enterprise network or the internet if and to the extent such a connection is necessary

and only when appropriate security measures (e.g. firewalls and/or network segmentation)

are in place.

For additional information on industrial security measures that may be implemented, please

visit (https://www.siemens.com/industrialsecurity).

Siemens' products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends that product updates are applied as soon as they are

available and that the latest product versions are used. Use of product versions that are no

longer supported, and failure to apply the latest updates may increase customers' exposure to

cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed visit (https://www.siemens.com/cert).

I/O device digital outputs DQ 8x24VDC/0.5A M12-L 8xM12 (6ES7142-6BG00-0BB0)

Equipment Manual, 03/2023, A5E46570894-AD 5

Preface

1 Guide to ET 200eco PN M12-L............................................................................................................. 8

1.1 Information classes ET 200eco PN M12-L........................................................................... 8

1.2 Basic tools........................................................................................................................ 9

1.3 MultiFieldbus Configuration Tool (MFCT).......................................................................... 11

1.4 SIMATIC Technical Documentation.................................................................................... 12

2 Product overview................................................................................................................................ 14

2.1 Properties ........................................................................................................................ 14

2.2 Operator controls and display elements............................................................................. 16

3 Wiring................................................................................................................................................. 17

3.1 Terminal and block diagram.............................................................................................. 17

3.2 Pin assignment................................................................................................................. 19

4 PROFINET IO........................................................................................................................................ 23

4.1 Parameters/address space................................................................................................. 23

4.1.1 Parameters....................................................................................................................... 23

4.1.2 Explanation of the parameters.......................................................................................... 24

4.1.3 Address space................................................................................................................... 25

4.2 Interrupts/diagnostics alarms............................................................................................ 28

4.2.1 Status and error displays................................................................................................... 28

4.2.2 Interrupts......................................................................................................................... 31

4.2.3 Alarms.............................................................................................................................. 31

4.2.3.1 Diagnostics alarms............................................................................................................ 31

4.2.3.2 Maintenance events.......................................................................................................... 32

5 EtherNet/IP.......................................................................................................................................... 33

5.1 Functions/parameters/address space................................................................................. 33

5.1.1 Supported EtherNet/IP functions....................................................................................... 33

5.1.2 Parameters....................................................................................................................... 34

5.1.3 Explanation of the parameters.......................................................................................... 35

5.1.4 Update time of the I/O data............................................................................................... 35

5.1.5 Address space................................................................................................................... 36

5.2 Diagnostics....................................................................................................................... 41

5.2.1 Status and error displays for EtherNet/IP............................................................................ 41

I/O device digital outputs DQ 8x24VDC/0.5A M12-L 8xM12 (6ES7142-6BG00-0BB0)

Equipment Manual, 03/2023, A5E46570894-AD

Table of contents

6 Modbus TCP........................................................................................................................................ 45

6.1 Functions/parameters/address space................................................................................. 45

6.1.1 Supported Modbus TCP functions...................................................................................... 45

6.1.2 Parameters....................................................................................................................... 46

6.1.3 Explanation of the parameters.......................................................................................... 46

6.1.4 Update time of the I/O data............................................................................................... 47

6.1.5 Address space................................................................................................................... 47

6.2 Diagnostics....................................................................................................................... 52

6.2.1 Status and error displays for Modbus TCP.......................................................................... 52

7 Technical specifications...................................................................................................................... 55

A Dimension drawing............................................................................................................................ 62

A.1 Dimension drawing........................................................................................................... 62

B Parameter data record........................................................................................................................ 63

B.1 Dependencies for the configuration.................................................................................. 63

B.2 Structure of data record 128 for I/O device parameter assignment..................................... 63

B.3 Error transferring the data record...................................................................................... 67

I/O device digital outputs DQ 8x24VDC/0.5A M12-L 8xM12 (6ES7142-6BG00-0BB0)

Equipment Manual, 03/2023, A5E46570894-AD 7

Table of contents

I/O device digital outputs DQ 8x24VDC/0.5A M12-L 8xM12 (6ES7142-6BG00-0BB0)

Equipment Manual, 03/2023, A5E46570894-AD

Guide to ET 200eco PN M12-L 1

1.1 Information classes ET 200eco PN M12-L

The documentation for the SIMATIC ET200ecoPNM12-L distributed I/O system is arranged

into three areas.

This arrangement enables you to access the specific content you require.

You can download the documentation free of charge from the Internet

(https://support.industry.siemens.com/cs/de/en/view/109742718).

Basic information

The System Manual describes in detail the configuration, installation, wiring and

commissioning of the SIMATICET200ecoPNM12-L distributed I/O system.

The STEP7 online help supports you in the configuration and programming.

Examples:

•ET200ecoPNM12-L System Manual

•Online help in the TIA Portal

Device information

Equipment manuals contain a compact description of the module-specific information, such

as properties, wiring diagrams, characteristics and technical specifications.

Examples:

•I/O Device Digital Inputs Equipment Manuals

•I/O Device Digital Inputs/Outputs Equipment Manuals

•IO-LinkMaster I/O Device Communication Module Equipment Manual

•I/O Device Analog Inputs Equipment Manual

General information

The function manuals contain detailed descriptions on general topics relating to the

SIMATICET200ecoPNM12-L distributed I/O system.

Examples:

•Function Manual Diagnostics

•Function Manual Communication

•PROFINET Function Manual

•Function Manual Designing Interference-free Controllers

•IO-Link System Function Manual

•MultiFieldbus Function Manual

1.2 Basic tools

The tools described below support you in all steps: from planning, over commissioning, all

the way to analysis of your system.

TIA Selection Tool

The TIA Selection Tool tool supports you in the selection, configuration, and ordering of

devices for Totally Integrated Automation (TIA).

As successor of the SIMATIC Selection Tools , the TIA Selection Tool assembles the already

known configurators for automation technology into a single tool.

With the TIA Selection Tool , you can generate a complete order list from your product

selection or product configuration.

You can find the TIA Selection Tool on the Internet.

(https://support.industry.siemens.com/cs/ww/en/view/109767888)

SIMATIC Automation Tool

You can use the SIMATIC Automation Tool to perform commissioning and maintenance

activities on various SIMATIC S7 stations as bulk operations independent of TIA Portal.

The SIMATIC Automation Tool offers a wide range of functions:

•Scanning of a PROFINET/Ethernet system network and identification of all connected CPUs

•Assignment of addresses (IP, subnet, Gateway) and device name (PROFINET device) to a

CPU

•Transfer of the date and the programming device/PC time converted to UTC time to the

module

•Program download to CPU

•RUN/STOP mode switchover

•CPU localization through LED flashing

•Reading out of CPU error information

•Reading the CPU diagnostic buffer

•Reset to factory settings

•Firmware update of the CPU and connected modules

You can find the SIMATIC Automation Tool on the Internet.

(https://support.industry.siemens.com/cs/ww/en/view/98161300)

Guide to ET 200eco PN M12-L

1.2 Basic tools

I/O device digital outputs DQ 8x24VDC/0.5A M12-L 8xM12 (6ES7142-6BG00-0BB0)

Equipment Manual, 03/2023, A5E46570894-AD

PRONETA

SIEMENS PRONETA (PROFINET network analysis) is a commissioning and diagnostic tool for

PROFINET networks. PRONETA Basic has two core functions:

•In the network analysis, you get an overview of the PROFINET topology. Compare a real

configuration with a reference installation or make simple parameter changes, e.g. to the

names and IP addresses of the devices.

•The "IO test" is a simple and rapid test of the wiring and the module configuration of a

plant, including documentation of the test results.

You can find SIEMENS PRONETA Basic on the Internet:

(https://support.industry.siemens.com/cs/ww/en/view/67460624)

SIEMENS PRONETA Professional is a licensed product that offers you additional functions. It

offers you simple asset management in PROFINET networks and supports operators of

automation systems in automatic data collection/acquisition of the components used through

various functions:

•The user interface (API) offers an access point to the automation cell to automate the scan

functions using MQTT or a command line.

•With PROFIenergy diagnostics, you can quickly detect the current pause mode or the

readiness for operation of devices that support PROFIenergy and change these as needed.

•The data record wizard supports PROFINET developers in reading and writing acyclic

PROFINET data records quickly and easily without PLC and engineering.

You can find SIEMENS PRONETA Professional on the Internet.

(https://www.siemens.com/proneta-professional)

SINETPLAN

SINETPLAN, the Siemens Network Planner, supports you in planning automation systems and

networks based on PROFINET. The tool facilitates professional and predictive dimensioning of

your PROFINET installation as early as in the planning stage. In addition, SINETPLAN supports

you during network optimization and helps you to exploit network resources optimally and to

plan reserves. This helps to prevent problems in commissioning or failures during productive

operation even in advance of a planned operation. This increases the availability of the

production plant and helps improve operational safety.

The advantages at a glance

•Network optimization thanks to port-specific calculation of the network load

•Increased production availability thanks to online scan and verification of existing systems

•Transparency before commissioning through importing and simulation of existing STEP 7

projects

•Efficiency through securing existing investments in the long term and the optimal use of

resources

You can find SINETPLAN on the Internet

(https://new.siemens.com/global/en/products/automation/industrial-

communication/profinet/sinetplan.html).

10 I/O device digital outputs DQ 8x24VDC/0.5A M12-L 8xM12 (6ES7142-6BG00-0BB0)

Equipment Manual, 03/2023, A5E46570894-AD

Guide to ET 200eco PN M12-L

1.2 Basic tools

Otros manuales para SIMATIC ET 200eco PN

Tabla de contenidos

Otros manuales de Sistema de E/S de Siemens

Siemens

Siemens SIMATIC 505 Manual de usuario

Siemens

Siemens FDCL221 Manual de usuario

Siemens

Siemens SIMATIC ET 200iS Manual de usuario

Siemens

Siemens FDCI221 Manual de usuario

Siemens

Siemens SIMATIC ET 200SP Manual de usuario

Siemens

Siemens Simatic S7-1500/ET 200MP Manual de usuario

Siemens

Siemens SIMATIC ET 200M Manual de usuario

Siemens

Siemens SIMADYN D EA12 Manual de usuario

Siemens

Siemens RXM21.1 Manual de usuario

Siemens

Siemens SIMATIC ET 200SP HA Manual de usuario

Siemens

Siemens SIMATIC S5 Manual de usuario

Siemens

Siemens SIMATIC ET 200AL Guía del usuario

Siemens

Siemens SIMATIC ET 200S Manual de usuario

Siemens

Siemens FDCIO223 Manual de usuario

Siemens

Siemens ION PROFIBUS DP SPY T001 Manual de usuario

Siemens

Siemens FDCI181-2 Manual de usuario

Siemens

Siemens 6ES7134-4NB01-0AB0 Manual de usuario

Siemens

Siemens SIMATIC ET 200iSP Manual de usuario

Siemens

Siemens SIMATIC ET 200eco Manual de usuario

Siemens

Siemens SIMATIC S7 EIP-200S Guía del usuario

Siemens

Siemens Simatic S7-1500 / ET 200MP Manual de usuario

Siemens

Siemens SIMATIC ET 200S Manual de usuario

Siemens

Siemens Simatic series Manual de usuario

Siemens

Siemens FDCI181-1 Manual de usuario

Manuales populares de Sistema de E/S de otras marcas

WAGO

WAGO 750-344 Manual de usuario

Teknim

Teknim TWM-1887 Manual de instrucciones

Intelligent Appliance

Intelligent Appliance IA-2662-E Manual de usuario

BERGHOF

BERGHOF ECC DIO 16/16 Manual de instrucciones

Advantech

Advantech PCM-27J3AU Manual de instalación y operación

Festo

Festo CP-E08-M12-CL Manual de usuario

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manual de usuario

Hitachi

Hitachi HX-RIO3 Series Manual de usuario

NUUO

NUUO SCB-A08 Manual de usuario

M-system

M-system R3Y-RS8 Manual de usuario

jablotron

jablotron JB-110N Manual de usuario

Omron

Omron SYSMAC C200H Manual de usuario

DOLD

DOLD SAFEMASTER M Manual de usuario

ABB

ABB OPT-MF-001 Manual de usuario

Omron

Omron SYSMAC C2000H Manual de usuario

Helmholz

Helmholz TB20 Manual de usuario

ICP DAS USA

ICP DAS USA tM-AD2 Manual de usuario

Automationdirect.com

Automationdirect.com DL305 Manual de usuario