Siemens SIMATIC ET 200eco PN Documento técnico

SIMATIC

ET 200eco PN

I/O device digital outputs

DQ 8x24VDC/0.5A M12

-L 8xM12

(6ES7142-6BG00-0BB0)

Equipment Manual

07/2020

A5E46570894

-AA

Preface

ET 200eco PN M12-L

Documentation Guide

Product overview

Wiring

Parameters/address space

Interrupts/diagnostics

alarms

Technical specifications

Dimension drawing

Siemens AG

Digital Industries

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E46570894-AA

Ⓟ

07/2020 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

I/O device digital outputs DQ 8x24VDC/0.5A M12-L 8xM12 (6ES7142-6BG00-0BB0)

Equipment Manual, 07/2020, A5E46570894-AA 3

Preface

Purpose of the documentation

This equipment manual supplements the ET 200eco PN M12-L Distributed I/O System

(https://support.industry.siemens.com/cs/ww/en/view/109778292) system manual. Functions

that relate in general to the distributed I/O devices ET 200eco PN M12-L are described in this

system manual.

The information provided in this equipment manual and in the system manual and the

function manuals supports you in commissioning the ET 200eco PN M12-L distributed I/O

devices.

Conventions

Also observe notes marked as follows:

Note

A note contains important information:

•

On the product described in the documentation

•

On handling the product

•

On the part of the documentation to which particular attention is paid

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions constitute one element of such a concept.

Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be connected

to an enterprise network or the internet if and to the extent such a connection is necessary

and only when appropriate security measures (e.g. firewalls and/or network segmentation)

are in place.

For additional information on industrial security measures that may be implemented, please

visit (https://www.siemens.com/industrialsecurity).

Siemens' products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends that product updates are applied as soon as they are

available and that the latest product versions are used. Use of product versions that are no

longer supported, and failure to apply the latest updates may increase customers' exposure to

cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed visit (https://www.siemens.com/industrialsecurity).

I/O device digital outputs DQ 8x24VDC/0.5A M12-L 8xM12 (6ES7142-6BG00-0BB0)

4Equipment Manual, 07/2020, A5E46570894-AA

Table of contents

Preface................................................................................................................................................... 3

1 ET 200eco PN M12-L Documentation Guide .......................................................................................... 5

2 Product overview................................................................................................................................... 9

2.1 Properties............................................................................................................................ 9

2.2 Operator controls and display elements ............................................................................. 11

3 Wiring .................................................................................................................................................. 12

3.1 Terminal and block diagram............................................................................................... 12

3.2 Pin assignment .................................................................................................................. 14

4 Parameters/address space ................................................................................................................... 18

4.1 Parameters ........................................................................................................................ 18

4.2 Explanation of the parameters ........................................................................................... 19

4.3 Address space.................................................................................................................... 20

5 Interrupts/diagnostics alarms.............................................................................................................. 24

5.1 Status and error displays.................................................................................................... 24

5.2 Interrupts .......................................................................................................................... 27

5.3 Alarms............................................................................................................................... 28

5.3.1 Diagnostics alarms............................................................................................................. 28

5.3.2 Maintenance events .......................................................................................................... 29

6 Technical specifications....................................................................................................................... 30

A Dimension drawing ............................................................................................................................. 35

A.1 Dimension drawing............................................................................................................ 35

I/O device digital outputs DQ 8x24VDC/0.5A M12-L 8xM12 (6ES7142-6BG00-0BB0)

Equipment Manual, 07/2020, A5E46570894-AA 5

ET 200eco PN M12-L Documentation Guide

The documentation for the SIMATIC ET 200eco PN M12-L distributed I/O system is arranged

into three areas. This arrangement enables you to access the specific content you require.

Basic information

The system manual describes in detail the configuration, installation, wiring and

commissioning of the SIMATIC ET 200eco PN M12-L distributed I/O system. The STEP 7 online

help supports you in the configuration and programming.

Device information

Product manuals contain a compact description of the module-specific information, such as

properties, interfaces, wiring diagrams, display and operator control elements and technical

specifications.

General information

The function manuals contain detailed descriptions on general topics relating to the SIMATIC

ET 200eco PN M12-L distributed I/O system, e.g. diagnostics, communication and PROFINET.

You can download the documentation free of charge from the Internet

(https://support.industry.siemens.com/cs/de/en/view/109742718).

ET 200eco PN M12-L Documentation Guide

I/O device digital outputs DQ 8x24VDC/0.5A M12-L 8xM12 (6ES7142-6BG00-0BB0)

6Equipment Manual, 07/2020, A5E46570894-AA

"mySupport"

With "mySupport", your personal workspace, you make the best out of your Industry Online

Support.

In "mySupport", you can save filters, favorites and tags, request CAx data and compile your

personal library in the Documentation area. In addition, your data is already filled out in

support requests and you can get an overview of your current requests at any time.

You must register once to use the full functionality of "mySupport".

You can find "mySupport" on the Internet (https://support.industry.siemens.com/My/ww/en).

Application examples

The application examples support you with various tools and examples for solving your

automation tasks. Solutions are shown in interplay with multiple components in the system -

separated from the focus on individual products.

You will find the application examples on the Internet

(https://support.industry.siemens.com/sc/ww/en/sc/2054).

TIA Selection Tool

With the TIA Selection Tool, you can select, configure and order devices for Totally Integrated

Automation (TIA).

This tool is the successor of the SIMATIC Selection Tool and combines the known

configurators for automation technology into one tool.

With the TIA Selection Tool, you can generate a complete order list from your product

selection or product configuration.

You can find the TIA Selection Tool on the Internet

(https://w3.siemens.com/mcms/topics/en/simatic/tia-selection-tool).

ET 200eco PN M12-L Documentation Guide

I/O device digital outputs DQ 8x24VDC/0.5A M12-L 8xM12 (6ES7142-6BG00-0BB0)

Equipment Manual, 07/2020, A5E46570894-AA 7

SIMATIC Automation Tool

You can use the SIMATIC Automation Tool to perform commissioning and maintenance

activities simultaneously on various SIMATIC S7 stations as a bulk operation independent of

TIA Portal.

The SIMATIC Automation Tool provides a multitude of functions:

•Scanning of a PROFINET/Ethernet system network and identification of all connected CPUs

•Address assignment (IP, subnet, gateway) and station name (PROFINET device) to a CPU

•Transfer of the date and the PG/PC time converted to UTC time to the module

•Program download to CPU

•RUN/STOP mode switchover

•CPU localization by means of LED flashing

•Reading out of CPU error information

•Reading the CPU diagnostics buffer

•Reset to factory settings

•Firmware update of the CPU and connected modules

You can find the SIMATIC Automation Tool on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/98161300).

PRONETA

SIEMENS PRONETA (PROFINET network analysis) allows you to analyze the plant network

during commissioning. PRONETA features two core functions:

•The topology overview automatically scans the PROFINET and all connected components.

•The IO check is a fast test of the wiring and the module configuration of a system.

You can find SIEMENS PRONETA on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/67460624).

ET 200eco PN M12-L Documentation Guide

I/O device digital outputs DQ 8x24VDC/0.5A M12-L 8xM12 (6ES7142-6BG00-0BB0)

8Equipment Manual, 07/2020, A5E46570894-AA

SINETPLAN

SINETPLAN, the Siemens Network Planner, supports you in planning automation systems and

networks based on PROFINET. The tool facilitates professional and predictive dimensioning of

your PROFINET installation as early as in the planning stage. In addition, SINETPLAN supports

you during network optimization and helps you to exploit network resources optimally and to

plan reserves. This helps to prevent problems in commissioning or failures during productive

operation even in advance of a planned operation. This increases the availability of the

production plant and helps improve operational safety.

The advantages at a glance

•Network optimization thanks to port-specific calculation of the network load

•Increased production availability thanks to online scan and verification of existing systems

•Transparency before commissioning through importing and simulation of existing STEP 7

projects

•Efficiency through securing existing investments in the long term and the optimal use of

resources

You can find SINETPLAN on the Internet (https://www.siemens.com/sinetplan).

I/O device digital outputs DQ 8x24VDC/0.5A M12-L 8xM12 (6ES7142-6BG00-0BB0)

Equipment Manual, 07/2020, A5E46570894-AA 9

Product overview

2.1 Properties

Article number

6ES7142-6BG00-0BB0

View of the I/O device

Figure 2-1 View of the I/O device DQ 8x24VDC/0.5A M12-L 8xM12

Otros manuales para SIMATIC ET 200eco PN

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de E/S de Siemens

Siemens

Siemens SIMATIC ET 200SP Manual de usuario

Siemens

Siemens SIMATIC PROFINET Manual de lista de piezas

Siemens

Siemens SIMATIC ET 200AL Documento técnico

Siemens

Siemens SIMATIC ET 200M Manual de usuario

Siemens

Siemens SIMATIC S5 ET 200U Manual de usuario

Siemens

Siemens SIMATIC ET 200AL Documento técnico

Siemens

Siemens SIMATIC ET 200SP Manual de usuario

Siemens

Siemens Simatic S7-1500 Manual de lista de piezas

Siemens

Siemens CASTOMAT ION ANALOGINPUT T001 Manual de usuario

Siemens

Siemens SIMATIC ET 200SP Guía del usuario

Siemens

Siemens SIMATIC ET 200SP Documento técnico

Siemens

Siemens SIMADYN D EB11 Manual de usuario

Siemens

Siemens TALON Series Manual del producto

Siemens

Siemens Simatic S7-300 Manual de usuario

Siemens

Siemens FDCIO422 Manual de servicio

Siemens

Siemens SIMATIC IM151-1 STANDARD Manual de usuario

Siemens

Siemens SITRANS RD500 Manual de usuario

Siemens

Siemens FDCI222 Manual de usuario

Siemens

Siemens SIMATIC ET 200S M151-3 PN Manual de usuario

Siemens

Siemens SICAM A8000 Series Manual de usuario

Siemens

Siemens SIMATIC ET 200S Manual de usuario

Siemens

Siemens SIMATIC ET 200L Manual de usuario

Siemens

Siemens EA12 Manual de usuario

Siemens

Siemens SIMATIC ET 200SP Manual de usuario

Manuales populares de Sistema de E/S de otras marcas

WAGO

WAGO 750-344 Manual de usuario

Teknim

Teknim TWM-1887 Manual de instrucciones

Intelligent Appliance

Intelligent Appliance IA-2662-E Manual de usuario

BERGHOF

BERGHOF ECC DIO 16/16 Manual de instrucciones

Advantech

Advantech PCM-27J3AU Manual de instalación y operación

Festo

Festo CP-E08-M12-CL Manual de usuario

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manual de usuario

Hitachi

Hitachi HX-RIO3 Series Manual de usuario

NUUO

NUUO SCB-A08 Manual de usuario

M-system

M-system R3Y-RS8 Manual de usuario

jablotron

jablotron JB-110N Manual de usuario

Omron

Omron SYSMAC C200H Manual de usuario

DOLD

DOLD SAFEMASTER M Manual de usuario

ABB

ABB OPT-MF-001 Manual de usuario

Omron

Omron SYSMAC C2000H Manual de usuario

Helmholz

Helmholz TB20 Manual de usuario

ICP DAS USA

ICP DAS USA tM-AD2 Manual de usuario

Automationdirect.com

Automationdirect.com DL305 Manual de usuario