Sanus DMF115 Manual de usuario
DMF
115
INSTRUCTION MANUAL
Scan for easy install video
san.us/18
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
1-888-333-9952. We’re ready to help!
2
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Before getting started, let’s make sure this mount is perfect for you! Para Español ver página 20
No
—
Perfect!
Yes
—
This mount is NOT compatible.
Visit decora.sanus.com or call 1-888-333-9952 to find a compatible mount.
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use
of this product, contact Customer Service at 1-888-333-9952.
Do you have
all the tools
needed?
1
2
3
4
What is your
wall made of?
60 lbs.
(27.2 kg)
Ready to begin?
Does your TV
(including accessories)
weigh more than
60 lbs. (27.2 kg)?
CAUTION:
DO NOT install
into drywall alone
Unsure?Drywall with
wood studs?
Solid concrete or
concrete block?
Call Customer Service: 1-888-333-9952 (UK: 0800-056-2853)
Perfect!
CAUTION: Avoid potential personal injuries and property damage!
●This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone
●The wall must be capable of supporting five times the weight of the TV and mount combined
●Do not use this product for any purpose not explicitly specified by manufacturer
●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
Wood Stud Install
Concrete Install
Awl
Pencil Level Stud Finder
Screwdriver
Tape
Measure
7/32 in.
(5.5 mm)
Wood
Drill Bit
Electric
Drill Hammer
1/2 in.
(13 mm)
Socket
Wrench Drill Bit
3/8 in.
(10 mm)
Concrete
Concrete Installation Kit Required (not included)
3
15.8
[40.0]
15.8
[40.0]
11.8
[30.0]
11.8
[30.0]
7.9
[20.0]
7.9
[20.0]
2.9
[7.5]
2.9
[7.5]
19.0
[48.3]
19.0
[48.3]
3.9
[10.0]
3.9
[10.0]
15°
15°
9.5
[24.1]
15.4
[39.1]
3.2
[8.2]
3.0
[7.6]
OFFSET
Dimensions
in.
[cm] NOTE: TV shifts 2.99 in. (7.59 cm) to
the right or left when in the home position.
Consider this when selecting the location of
your wall mount.
4
NOTE: Not all hardware included will be used.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to
your dealer; contact Customer Service. Never use damaged parts!
Supplied Parts and Hardware
M4 x 12mm
M5 x 12mm
M6 x 12mm M6 x 35mm
M5 x 35mm
M4 x 35mm
M6 x 20mm
M8 x 16mm
M8 x 12mm M8 x 35mm
M8 x 20mm
STEP 1 Parts and Hardware
01
TV Bracket
TV Screws
Washers
Spacers
TV Bracket
Extenders
Interface Screws (TV Bracket)
04
06
05
07 x4
x4
x4
x4
09 x4
11 x4
08 x4
10 x4
12 x4 13 x4
14 x4 15 x4 16 x4
03 x8
x1
02 x4
M
4
/
M
5
M
6
/
M
8
5
5/16 x 2¾ in.
.695 x .350 x .075 in.
Concrete Installation Kit CMK1 (not included)
1/4-20 x 3/4 in.
5/16 x 2¾ in.
STEP 2 Parts and Hardware STEP 3 Parts and Hardware
Additional Parts and Hardware
Cable Ties
x3
22
17 x1 18 x1
Wall Plate Assembly
Wall Plate Template
Lag Bolts
Lag Bolt Washers
20 x2
x4
x4
x4
21 x1
Locking Screw
19 x2
.695 x .350 x.075 in.
5/16 x 2¾ in.
Contact Customer Service at 1-888-333-9952 to have these
additional pieces shipped directly to you.
Fischer UX 10 x 60 Anchor
5/16 x 2¾ in.
.695 x .350 x.075 in.
6
STEP 1 Attach TV Bracket to TV
1.1 Measure Your TV Hole Pattern 1.2 Assemble Your TV Bracket
cm
inches
inch dimensions are approximate
Measure the width and height of your
TV hole pattern in cm.
Record your measurements:
Width_______cm x Height_______cm
75 mm = 7.5 cm ≈ 3 in.
100 mm = 10 cm ≈ 4 in.
200 mm = 20 cm ≈ 7 7/8 in.
300 mm = 30 cm ≈ 11 3/4 in.
400 mm = 40 cm ≈ 15 3/4 in.
Based on your TV hole pattern measurements
(Wcm x Hcm), determine your TV bracket
configuration: A, B, C, D or E.
A
7.87
[20.0]
15.75
[40.0]
15.75
[40.0]
2.95
[7.5]
in.
[cm]
in.
[cm]
B
These smaller hole patterns only use TV
bracket 01 . Do not use the four TV bracket
extenders 02 and eight screws 03 .
7.5 x 7.5 cm
10.0 x 10.0 cm
20.0 X 20.0 cm
02
2.95
[7.5]
3.94
[10.0]
7.87
[20.0]
3.94
[10.0]
03
Assemble TV bracket extenders 02 onto
TV bracket 01 and secure using eight
screws 03 in the corner holes indicated.
02
01
01
03
11.81
[30.0]
11.81
[30.0]
02
30.0 x 30.0 cm
40.0 x 40.0 cm
7
03
in.
[cm] in.
[cm]
40.0 x 20.0 cm 20.0 x 40.0 cm
D E
03
15.75
[40.0]
7.87
[20.0]
15.75
[40.0]
7.87
[20.0]
01
Assemble TV bracket extenders 02 onto
TV bracket 01 and secure using eight
screws 03 in the corner holes indicated.
Assemble TV bracket extenders 02 onto
TV bracket 01 and secure using eight
screws 03 in the corner holes indicated.
01
02
02
02
02
15.75
[40.0]
11.81
[30.0]
in.
[cm]
40.0 x 30.0 cm
C
03
Assemble TV bracket extenders 02 onto
TV bracket 01 and secure using eight
screws 03 in the corner holes indicated.
02
02
01
8
M5 M6 M8M4
1.3 Select TV Screw Diameter 1.4 Select TV Screw Length
Hand thread screws into the threaded inserts
on the back of your TV to determine which
screw diameter (M4, M5, M6, or M8) to use.
FLAT BACK ROUND BACK CABLESINSET HOLES
If your TV has a flat back AND you want your TV closer to the
wall, use the shorter screws.
Spacers and longer screws are supplied to accommodate:
●Round/irregular back TVs
●TVs with inset mounting holes
●Extra space needed for cables
Too Long
CAUTION:
Verify adequate thread
engagement with the screw or
screw/spacer combination.
-Too short will not hold the TV.
-Too long will damage the TV.
Too Short
Correct
Standard configurations
are shown. For special
applications, or if you
are uncertain about your
hardware selection, contact
Customer Service at 1-888-
333-9952.
9
1.5 Attach TV Bracket
TV Bracket Configuration B
Illustrated (with spacers)
06
04 05
08
07 09 11 12
10
14
13
15
16
04 05
Note
orientation
of hanging
and locking
tabs
Hanging
Locking
Flat Back
Round Back / Extra Space
TV Bracket Configuration A
Illustrated (with spacers)
Position your TV bracket configuration (A, B, C, D or E) over your TV hole pattern - making sure the bracket is centered over the TV hole pattern
and level. Secure bracket using your short screw/washer (Flat Back) or long screw/washer/spacer (Round Back / Extra Space) selection.
IMPORTANT: Ensure TV bracket is securely fastened before moving on to the next step.
01
01
02
10
CAUTION: Avoid potential personal injuries and property damage!
●Drywall covering the wall must not exceed 5/8 in. (16 mm)
●Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
1. Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.
2. Position the wall plate template 17 at your desired height and line up the holes with your stud center line. Level the template and tape in place.
17
≤ 5/8 in.
(16 mm)
NOTE: TV shifts 2.99 in. (7.59 cm) to
the right or left when in the home
position. Consider this when selecting
the location of your wall mount.
STEP 2A Attach Wall Plate to Wall Wood Stud Option
21
Tabla de contenidos
Otros manuales de Soporte de TV de Sanus
Sanus
Sanus VXT5 Manual de usuario
Sanus
Sanus SA809 Manual de usuario
Sanus
Sanus NEW VisionMount VLT14 Manual de usuario
Sanus
Sanus F256 Manual de usuario
Sanus
Sanus VisionMount ML11-B1 Manual de usuario
Sanus
Sanus SLF7 Manual de usuario
Sanus
Sanus VSF415B1 Manual de usuario
Sanus
Sanus LLF122 Manual de usuario
Sanus
Sanus VLF525-B3 Manual de usuario
Sanus
Sanus VisionMount LT25 Manual de usuario
Sanus
Sanus New VisionMount LF228-B1 Manual de usuario
Sanus
Sanus VLT7-B3 Manual de usuario
Sanus
Sanus VisionMount VLF210 Manual de usuario
Sanus
Sanus Classic MLT15 Manual de usuario
Sanus
Sanus VLT7-B2 Manual de usuario
Sanus
Sanus Classic MLT13 Manual de usuario
Sanus
Sanus XF228 Manual de usuario
Sanus
Sanus VMD2 Manual de usuario
Sanus
Sanus Classic MMF10 Manual de usuario
Sanus
Sanus VXT7-B2 Manual de usuario
