Sanus OLT15 Manual de usuario
OLT
15
INSTRUCTION MANUAL
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
1-800-359-5520. We’re ready to help!
2
Before getting started, let’s make sure this mount is perfect for you!
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
No
—
Perfect!
Yes
—
This mount is NOT compatible. Visit MountFinder.Sanus.com or call
1-800-359-5520 (UK: 0800-056-2853) to find a compatible mount.
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use
of this product, contact Customer Service at 1-800-359-5520 (UK: 0800-056-2853).
Do you have
all the tools
needed?
1
2
3
4
What is your
wall made of? Unsure?
Drywall with
wood studs?
Solid concrete or
concrete block?
CAUTION: Avoid potential personal injuries and property damage!
●This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone
●The wall must be capable of supporting five times the weight of the TV and mount combined
●Do not use this product for any purpose not explicitly specified by manufacturer
●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
Call Customer Service:
1-800-359-5520 (UK: 0800-056-2853)
Perfect! Perfect!
Ready to
begin?
CAUTION:
DO NOT install
into drywall alone
Wood Stud Install
Concrete Install
AwlPencil Level Stud FinderScrewdriverTape
Measure
7/32 in.
(5.5 mm)
Wood
Drill Bit
Electric Drill Hammer
1/2 in.
(13 mm)
Socket
Wrench Drill Bit
3/8 in.
(10 mm)
Concrete
Does your TV
(including accessories)
weigh MORE than
120 lb (54 kg)?
120 lb
(54 kg)
3
25.59
650.0
15.94
405.0
0.49
12.5
0.35
8.8
2.95
75.0
2.93
74.4
25.72
653.4
17.72
450.0
16.00
406.4
23.62
600.0
24.00
609.6
16.93
430.0
27.06
687.4
6.00
152.4
0.38
9.7
OFFSET
3.54
89.8
5°
10°
2.04
51.9
TV INTERFACE
WALL PLATE
FULLY ASSEMBLED MOUNT
TOP VIEW - EXTENDED
TOP VIEW - RETRACTED
SIDE VIEW - EXTENDED
SIDE VIEW - RETRACTED
3-D
Dimensions
in.
[mm]
4
M8 x 25mm
M6 x 12mm M6 x 20mm M6 x 35mm
M4 x 12mm M4 x 35mm
M8 x 50mm
M8 x 45mm
M8 x 35mm
M8 x 16mm
M8 x 20mm
M4 / M5 M6 / M8
2.5mm 22mm
TV Brackets
01 02
x1 x1
Parts and Hardware
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts
are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service.
Never use damaged parts!
Parts and Hardware for STEP 1
NOTE: Not all hardware included will be used.
03
x4
10
x4
04
x4
07
x4
11
x4
05
x4
08
x4
12
x4
06
x4
09
x4
13
x4
14
x4
15
x4
16
x4
17
x4
TV Screws
Washers Spacers
5
18
19
x1
x1
Parts and Hardware for STEP 2
⁄ x2 ⁄ in.
⁄ in.
Fischer UX10 x 60R
Lag Bolts
21 x4
Washers
(Lag Bolts)
20 x4
22
x4
Concrete Anchor
For concrete installations ONLY
CAUTION: Do not use in drywall or wood
6
STEP 1 Attach Brackets to TV
1-1 Select TV
Screw Diameter
1-2 Select TV
Screw Length
Hand thread screws into the threaded
inserts on the back of your TV to
determine which screw diameter
(M4, M6, or M8) to use.
Too Short
Too Long
CAUTION:
Verify adequate thread
engagement with the screw/
washer/spacer combination
AND the TV brackets.
-Too short will not hold the TV.
-Too long will damage the TV.
Correct
Standard configurations
are shown. For special
applications, or if you
are uncertain about your
hardware selection,
contact Customer Service.
a:For flat-back TVs,
no spacers 16 or 17
required.
ab
17 16
b:Spacers 16 or 17 supplied for:
●Round (irregular) back TVs
●Extra space needed (for cables
or inset mounting holes)
FLAT BACK ROUND BACK CABLES INSET HOLES
M6
M4
M8
7
1-3 Attach TV Brackets
Ensure that your brackets are centered and level on the back of the TV and install using the spacer, screw and washer combination you
selected for your TV.
CAUTION: Avoid potential personal injuries and property damage! DO NOT use power tools for this step. Tighten the TV screws only
enough to secure the TV brackets 01 and 02 to the TV. DO NOT overtighten the TV screws.
IMPORTANT: Ensure TV brackets 01 and 02 are securely fastened before moving on to the next step.
aFlat Back
bRound Back / Extra Space
16 17
14
14
15
15
y
0201
13
13
03
03
8
STEP 2A Attach Wall Plate to Wall Wood Stud Option
CAUTION: Avoid potential personal injuries and property damage!
• Drywall covering the wall must not exceed 5/8 in. (16 mm)
• Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1½ x 3½ in. (38 x 89 mm)
• Minimum horizontal space between fasteners: 16 in. (406 mm)
1. Locate your studs. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.
2. Position the wall plate template 18 at your desired height and line up the holes with your stud center line. Level the template and tape in place.
12
Min. 16 in.
(406 mm)
Max. 5/8 in.
(16 mm) 18
9
4
3
19
20 21
18
3. Drill four pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove wall plate template 18 .
IMPORTANT: Be sure to drill into the center of the studs.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm).
4. Install wall plate 19 using four lag bolts 20 and four washers 21 . Tighten the lag bolts only until they are pulled firmly against the wall
plate 19 .
CAUTION: Avoid potential personal injury or property damage! All four lag bolts 20 MUST BE firmly tightened to prevent unwanted
movement of the wall plate 19 .Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
3 in. (75 mm)
7/32 in.
(5.5 mm)
10
STEP 2B Attach Wall Plate to Wall Solid Concrete or Concrete Block Option
CAUTION: Avoid potential personal injuries and property damage!
• Mount the wall plate 19 directly onto the concrete surface
• Minimum solid concrete thickness: 8 in. (203 mm)
• Minimum concrete block size: 8 x 8x 16 in. (203 x 203 x 406 mm)
• Minimum horizontal space between fasteners: 16 in. (406 mm)
1. Position the wall plate template 18 on the wall at your desired height. Level the wall plate template and mark the hole locations.
2. Drill four pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Never drill into the mortar between blocks.
21
Min.
16 in.
(406 mm)
18 18
3/8 in.
(10 mm)
3 in. (75 mm)
Tabla de contenidos
Idiomas:
Otros manuales de Soporte de TV de Sanus
Sanus
Sanus VLL5 Manual de usuario
Sanus
Sanus Visionmount FFSF1A Manual de usuario
Sanus
Sanus Decora DST1 Manual de usuario
Sanus
Sanus New VisionMount VXF220-B1 Manual de usuario
Sanus
Sanus VisionMount VMPl50A Manual de usuario
Sanus
Sanus CILT3 Manual de usuario
Sanus
Sanus BLL1 Manual de usuario
Sanus
Sanus MMT16b Manual de usuario
Sanus
Sanus VLF320 Manual de usuario
Sanus
Sanus Visionmount MF209 Manual de usuario
Sanus
Sanus SLF428-B2 Manual de usuario
Sanus
Sanus VisionMount VMF308 Manual de usuario
Sanus
Sanus SA405 Manual de usuario
Sanus
Sanus SASP1 Manual de usuario
Sanus
Sanus BLL2 Manual de usuario
Sanus
Sanus New VisionMount VLL10-B1 Manual de usuario
Sanus
Sanus Classic MMF15 Manual de usuario
Sanus
Sanus VMCA10 Manual de usuario
Sanus
Sanus XF228 Manual de usuario
Sanus
Sanus VisionMount MF215 Manual de usuario
