Ruijie RG-SAP750-SP Manual de instalación y funcionamiento

Ruijie RG-SAP750-SP Access Point

Hardware Installation and Reference Guide

Document Version: V1.0

Date: August 25, 2023

All rights are reserved in this document and this statement.

Any reproduction, excerption, backup, modification, transmission, translation or commercial use of this

document or any portion of this document, in any form or by any means, without the prior written consent

of Ruijie Networks is prohibited.

Trademark and are owned by Ruijie Networks.

All other trademarks or registered trademarks mentioned in this document are owned by their respective

owners.

Disclaimer

The products, services, or features you purchase are subject to commercial contracts and terms. Some or

all of the products, services or features described in this document may not be within the scope of your

purchase or use. Unless otherwise agreed in the contract, Ruijie Networks does not make any express or

implied statement or guarantee for the content of this document.

Due to product version upgrades or other reasons, the content of this document will be updated from

time to time. Ruijie Networks reserves the right to modify the content of the document without any notice

or prompt.

This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy and will not

shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or

errors.

Preface

Intended Audience

This document is intended for:

Network engineers

Technical support and servicing engineers

Network administrators

Technical Support

Ruijie Networks Website: https://www.ruijienetworks.com/

Technical Support Website: https://ruijienetworks.com/support

Case Portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical Support Email: [email protected]

Live Chat: https://www.ruijienetworks.com/rita

Conventions

1. Conventions

Convention

Description

Bold font

Commands, command options, and keywords are in bold font.

Italic font

Arguments for which you supply values are in italic font.

[ ]

Elements in square brackets are optional.

{ x | y | z }

Alternative keywords are grouped in braces and separated by

vertical bars.

[ x | y | z ]

Optional alternative keywords are grouped in brackets and

separated by vertical bars.

&<1-n>

The argument before the sign (&) can be input for consecutive 1-

n times.

Double slashes at the beginning of a line of code indicate a

comment line.

2. Signs

The signs used in this document are described as follows:

Warning

An alert that calls attention to important rules and information that if not understood or followed can

result in data loss or equipment damage.

Caution

An alert that calls attention to essential information that if not understood or followed can result in

function failure or performance degradation.

Note

An alert that contains additional or supplementary information that if not understood or followed will

not lead to serious consequences.

Specification

An alert that contains a description of product or version support.

3. Note

The manual offers information (including model, port type and command line interface) for indicative

purpose only. In case of any discrepancy or inconsistency between the manual and the actual version, the

actual version prevails.

Contents

Preface.................................................................................................................................................. I

1Product Overview ............................................................................................................................ 1

1.1 About the RG-SAP750-SP Access Point...................................................................................1

1.2 Hardware Features...................................................................................................................1

1.3 Package Contents.....................................................................................................................3

1.4 Technical Specifications...........................................................................................................4

1.4.1 Dimensions and Weight...............................................................................................4

1.4.2 RF Specifications...........................................................................................................4

1.4.3 Port Specifications........................................................................................................6

1.4.4 Power Supply and Consumption.................................................................................6

1.4.5 Environment and Reliability ........................................................................................7

1.5 LED and Button.........................................................................................................................7

2Preparing for Installation................................................................................................................ 9

2.1 Safety Precautions....................................................................................................................9

2.1.1 General Safety Precautions .........................................................................................9

2.1.2 Handling Safety ............................................................................................................9

2.1.3 Electric Safety..............................................................................................................10

2.1.4 Storage Safety.............................................................................................................10

2.2 Installation Environment Requirements ..............................................................................10

2.2.1 Bearing Requirements...............................................................................................10

2.2.2 Ventilation Requirements..........................................................................................11

2.2.3 Space Requirements ..................................................................................................11

2.2.4 Temperature and Humidity Requirements..............................................................11

2.2.5 Cleanliness Requirements .........................................................................................11

2.2.6 Anti-interference Requirements ...............................................................................12

2.2.7 Lightning Protection Requirements .........................................................................13

2.2.8 Installation Site Requirements..................................................................................13

2.3 Installation Tools....................................................................................................................13

3Installing the Access Point ............................................................................................................ 14

3.1 Installation Flowchart ............................................................................................................14

3.2 Before You Begin....................................................................................................................14

3.3 Precautions .............................................................................................................................15

3.4 Installing the Access Point.....................................................................................................16

3.4.1 Ceiling Mount..............................................................................................................16

3.4.2 Wall Mount..................................................................................................................18

3.4.3 Removing the Access Point .......................................................................................20

3.5 Installing Other Modules.......................................................................................................21

3.5.1 Installing the Securing Latch.....................................................................................21

3.6 Connecting Cables..................................................................................................................22

3.7 Bundling Cables......................................................................................................................28

iii

3.7.1 Precautions .................................................................................................................28

3.7.2 Steps ............................................................................................................................28

3.8 Checklist After Installation.....................................................................................................29

3.8.1 Checking Access Point................................................................................................29

3.8.2 Checking Cable Connection.......................................................................................29

3.8.3 Checking Power Supply .............................................................................................29

4Verifying Operating Status ........................................................................................................... 30

4.1 Setting up Configuration Environment ................................................................................30

4.2 Powering on the Access Point...............................................................................................30

4.2.1 Checklist Before Power-on ........................................................................................30

4.2.2 Checklist After Power-on (Recommended) ..............................................................30

5Monitoring and Maintenance....................................................................................................... 31

5.1 Monitoring ..............................................................................................................................31

5.1.1 LED...............................................................................................................................31

5.1.2 CLI Commands ...........................................................................................................31

5.2 Remote Maintenance.............................................................................................................31

5.3 Hardware Maintenance .........................................................................................................31

6Common Troubleshooting............................................................................................................ 32

6.1 General Troubleshooting Flowchart.....................................................................................32

6.2 Common Faults ......................................................................................................................32

6.2.1 Ethernet Port Is Not Working After the Ethernet Cable Is Connected ..................32

6.2.2 LED Is Off for a Long Time.........................................................................................32

6.2.3 LED Keeps Blinking Red .............................................................................................32

6.2.4 LED Keeps Blinking Green .........................................................................................33

6.2.5 LED Keeps Blinking Orange (in Fit Mode).................................................................33

6.2.6 LED Does Not Turn Solid Blue or Blinking Blue .......................................................33

6.2.7 Clients Can Not Find the Access Point......................................................................33

7Appendix......................................................................................................................................... 34

7.1 Connectors and Media...........................................................................................................34

7.2 Cabling ....................................................................................................................................36

7.3 DC Connector Specifications .................................................................................................40

Hardware Installation and Reference Guide Product Overview

1 Product Overview

1.1 About the RG-SAP750-SP Access Point

The RG-SAP750-SP is a wall-mount dual-radio wireless access point (AP) designed for a wide variety of

indoor scenarios in the sectors including higher education, government, general education, finance, and

business, meeting diverse service needs. By adopting a dual-radio design, the AP delivers a combined

peak data rate of 1.167 Gbps, with up to 300 Mbps in the 2.4 GHz band and 867 Mbps in the 5 GHz band.

This eliminates the performance bottleneck. The AP is compatible with multiple devices, facilitating

connections between employees and customers.

The RG-SAP750-SP stands out with its exceptional wireless network security, RF control, mobile access,

QoS guarantee, and seamless roaming. Interworking with Ruijie's wireless access controller (AC), it

enables wireless user data forwarding, security, and access control to cope with diverse service needs.

The RG-SAP750-SP supports both local power supply and Power over Ethernet (PoE), providing you with

the flexibility to choose the power supply mode. In addition, the RG-SAP750-SP can be mounted on a wall

or ceiling, making space deployment and environmental requirements less challenging. This makes the

RG-SAP750-SP particularly suitable for scenarios, including large campuses, conference centers,

enterprise offices, and operation hotspots.

1.2 Hardware Features

The RG-SAP750-SP provides two radio frequency (RF) connectors, one Ethernet electrical port (IEEE

802.3af-compliant), one RJ45 console port, one DC power connector, and one Reset button.

Hardware Installation and Reference Guide Product Overview

Figure 1-1 Front View

Table 1-1 LED

No.

LED

Description

System status LED

Indicates the system operating status.

Figure 1-2 Side View

Tabla de contenidos

Otros manuales de Punto de acceso inalámbrico de Ruijie

Ruijie

Ruijie RG-AP680-A Manual de instalación y funcionamiento

Ruijie

Ruijie RG-WLAN Series Manual de usuario

Ruijie

Ruijie RG-AP180 Series Manual de usuario

Ruijie

Ruijie Reyee RG-RAP73HD Manual de usuario

Ruijie

Ruijie RG-WLAN Series Manual de usuario

Ruijie

Ruijie RG-AP680P-L Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee RG-RAP1200-MNT Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-MAP852-SF-U Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP680-CD Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee Series Dimensiones

Ruijie

Ruijie Reyee Series Manual de usuario

Ruijie

Ruijie Reyee RG-RAP2260 Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP740-I Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP820-I Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AM5528-SF Manual de instalación y funcionamiento

Ruijie

Ruijie RG-WLAN Series Manual de usuario

Ruijie

Ruijie RG-AP680-O Manual de usuario

Ruijie

Ruijie RG-AP880-AR Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP810-L Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP680-I Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP680-IO Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP630 Directional Manual de usuario

Ruijie

Ruijie Reyee RG-RAP1260 Manual de instalación y funcionamiento

Ruijie

Ruijie RG-SAP150-SP-W Manual de instalación y funcionamiento

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario