Ruijie RG-MAP852-SF-U Manual de instalación y funcionamiento

Ruijie RG-MAP852-SF-U Access Point

Hardware Installation and Reference Guide

Document Version: V1.1

Date: August 16, 2023

Networks

All rights are reserved in this document and this statement.

Any reproduction, excerption, backup, modification, transmission, translation or

commercial use of this document or any portion of this document, in any form or by any

means, without the prior written consent of Ruijie Networks is prohibited.

Trademark and are owned by Ruijie

Networks.

All other trademarks or registered trademarks mentioned in this document are owned by

their respective owners.

Disclaimer

The products, services, or features you purchase are subject to commercial contracts and

terms. Some or all of the products, services or features described in this document may

not be within the scope of your purchase or use. Unless otherwise agreed in the contract,

Ruijie Networks does not make any express or implied statement or guarantee for the

content of this document.

Due to product version upgrades or other reasons, the content of this document will be

updated from time to time. Ruijie Networks reserves the right to modify the content of

the document without any notice or prompt.

This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy

and will not shoulder any responsibility for losses and damages caused due to content

omissions, inaccuracies or errors.

Preface

Intended Audience

This document is intended for:

Network engineers

Technical support and servicing engineers

Network administrators

Technical Support

Ruijie Networks Website: https://www.ruijienetworks.com/

Technical Support Website: https://ruijienetworks.com/support

Case Portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical Support Email: service_rj@ruijienetworks.com

Skype: service_rj@ruijienetworks.com

Conventions

1. Conversions

Convention

Description

Bold font

Commands, command options, and keywords are in

bold font.

Italic font

Arguments for which you supply values are in italic font.

[ ]

Elements in square brackets are optional.

{ x | y | z }

Alternative keywords are grouped in braces and

separated by vertical bars.

[ x | y | z ]

Optional alternative keywords are grouped in brackets

and separated by vertical bars.

&<1-n>

The argument before the sign (&) can be input for

consecutive 1- n times.

Double slashes at the beginning of a line of code

indicate a comment line.

2. Signs

The signs used in this document are described as follows:

Warning

An alert that calls attention to important rules and information that if not understood or

followed can result in data loss or equipment damage.

Caution

An alert that calls attention to essential information that if not understood or followed

can result in function failure or performance degradation.

Note

An alert that contains additional or supplementary information that if not understood or

followed will not lead to serious consequences.

Specification

An alert that contains a description of product or version support.

Contents

Preface...................................................................................................................................................I

1 Product Introduction........................................................................................................................1

1.1 Product Overview.....................................................................................................................1

1.2 Product Appearance ................................................................................................................1

1.3 Package Contents.....................................................................................................................5

1.4 Technical Specifications...........................................................................................................6

1.4.1 Dimensions and Weight...............................................................................................6

1.4.2 Radio Specifications .....................................................................................................7

1.4.3 Port Specifications........................................................................................................8

1.4.4 Power Supply and Consumption ................................................................................9

1.4.5 Environment and Reliability ......................................................................................10

1.5 Indicators and Buttons ..........................................................................................................10

2 Preparing for Installation...............................................................................................................12

2.1 Safety Precautions..................................................................................................................12

2.1.1 General Safety Precautions .......................................................................................12

2.1.2 Handling Safety ..........................................................................................................12

2.1.3 Electric Safety..............................................................................................................13

2.1.4 Storage Security .........................................................................................................13

2.2 Installation Environment Requirements..............................................................................13

2.2.1 Bearing Requirements...............................................................................................14

2.2.2 Ventilation Requirements..........................................................................................14

2.2.3 Space Requirements ..................................................................................................14

2.2.4 Temperature/Humidity Requirements.....................................................................14

2.2.5 Cleanliness Requirements.........................................................................................15

2.2.6 Grounding Requirements..........................................................................................16

2.2.7 Anti-interference Requirements ...............................................................................16

2.2.8 Lightning Protection Requirements .........................................................................16

2.2.9 Inspection of the Installation Unit ............................................................................17

2.3 Tools ........................................................................................................................................17

3 Installation ......................................................................................................................................18

3.1 Installation Procedure ...........................................................................................................18

3.2 Preparations Before Installation...........................................................................................19

3.3 Precautions.............................................................................................................................20

3.4 Installing the Device...............................................................................................................20

3.4.1 Embedding in an 86-type Panel ................................................................................20

3.4.2 Embedding in a 172-type Panel ................................................................................26

3.4.3 Mounting the Device on a Wall.................................................................................27

3.4.4 Removing the AP........................................................................................................28

3.5 Connecting Cables .................................................................................................................29

3.6 Bundling Cables......................................................................................................................29

iii

3.6.1 Precautions.................................................................................................................29

3.6.2 Bundling Steps............................................................................................................30

3.7 Installation Verification..........................................................................................................30

3.7.1 Checking the AP..........................................................................................................30

3.7.2 Checking Cable Connection.......................................................................................30

3.7.3 Checking the Power Supply.......................................................................................30

4 Debugging.......................................................................................................................................31

4.1 Establishing the Configuration Environment ......................................................................31

4.2 Powering on the AP................................................................................................................31

4.2.1 Check Before Power-on .............................................................................................31

4.2.2 Check After Power-on ................................................................................................31

5 Monitoring and Maintenance........................................................................................................32

5.1 Monitoring ..............................................................................................................................32

5.1.1 Indicator......................................................................................................................32

5.1.2 CLI Commands ...........................................................................................................32

5.2 Remote Maintenance.............................................................................................................32

5.3 Hardware Maintenance .........................................................................................................32

6 Troubleshooting .............................................................................................................................33

6.1 General Troubleshooting Procedure....................................................................................33

6.2 Common Troubleshooting Procedures................................................................................33

6.2.1 The Ethernet Port Is Unavailable After an Ethernet Cable Is Connected to the Port

6.2.2 The Indicator Is Off for a Long Time.........................................................................33

6.2.3 The Indicator Is Steady Red.......................................................................................34

6.2.4 The Indicator Is Steady Green...................................................................................34

6.2.5 The Indicator Keeps Blinking Green at an Interval of 0.2s (in Fit Mode)...............34

6.2.6 No Wireless Signal Searched Out .............................................................................34

7 Appendix .........................................................................................................................................35

7.1 Connectors and Media...........................................................................................................35

7.2 Cabling Recommendations ...................................................................................................37

7.3 Optical Modules and Specifications......................................................................................42

7.4 Power Supply Specifications..................................................................................................44

Hardware Installation Guide Product Introduction

1 Product Introduction

1.1 Product Overview

RG-MAP852-SF-U is a wireless AP for new-generation high-speed wireless networks in

scenarios with dense buildings, such as the campus dormitory network and medical care

ward network. It adopts the latest IEEE 802.11ax protocol and dual-radio technology. Its

2.4 GHz radio frequency (RF) unit provides up to 574 Mbps access rate, and the 5 GHz RF

unit provides up to 2.402 Gbps access rate. The device provides up to 2.976 Gbps wireless

access rate. The ultra-high wireless rate makes performance no longer a bottleneck.

1.2 Product Appearance

RG-MAP852-SF-U provides two wireless radio ports, eight 10/100/1000Base-T adaptive

Ethernet ports, one 2.5G optical port, one console management port, and one power port.

It can be powered through DC or photoelectric hybrid cable. The following figures show

the product appearance.

Figure 1-1Front View

Hardware Installation Guide Product Introduction

Figure 1-2Rear View

Figure 1-3Bottom View

Tabla de contenidos

Otros manuales de Punto de acceso inalámbrico de Ruijie

Ruijie

Ruijie Reyee RG-RAP2200 Manual de instalación y funcionamiento

Ruijie

Ruijie RG-MAP852-SF-M Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP730-L Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP630 Directional Manual de instalación y funcionamiento

Ruijie

Ruijie AP630 Series Guía de instalación

Ruijie

Ruijie RG-AP810-I Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP130(W2) V2 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-SAP825-SP Manual de instalación y funcionamiento

Ruijie

Ruijie RG-SAP185-SP-W Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee RG-RAP6262 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP130(L) Manual de instalación y funcionamiento

Ruijie

Ruijie HA3515-DG Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP680-I Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP110-L Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP180 Series Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee RG-RAP2200 Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee RG-RAP52-OD Manual de usuario

Ruijie

Ruijie Reyee RG-RAP2260 Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP820-L(V2) Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-EAP602 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP820(AR) Manual de instalación y funcionamiento

Ruijie

Ruijie RG-SAP845-SP Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee Series Manual de usuario

Ruijie

Ruijie RG-WLAN Series Manual de usuario

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario