Ruijie RG-AP810-I Manual de instalación y funcionamiento

Ruijie RG-AP810-I Access Point

Hardware Installation and Reference Guide

Document Version: V1.2

Date: 2023.8.10

Networks

Ruijie Networks reserves all copyrights of this document.

Any reproduction, excerption, backup, modification, transmission, translation or

commercial use of this document or any portion of this document, in any form or by any

means, without the prior written consent of Ruijie Networks is prohibited.

Trademarks including and are owned by

Ruijie Networks.

All other trademarks or registered trademarks mentioned in this document are owned

by their respective owners.

Disclaimer

The products, services or features you purchase are subject to commercial contracts and

terms. Some or all of the products, services or features described in this document may

not be within the scope of your purchase or use. Unless otherwise agreed in the contract,

Ruijie Networks does not make any express or implied statement or guarantee for the

content of this document.

Due to product version upgrades or other reasons, the content of this document will be

updated from time to time. Ruijie Networks reserves the right to modify the content of

the document without any notice or prompt.

This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy

and will not shoulder any responsibility for losses and damages caused due to content

omissions, inaccuracies or errors.

Preface

Intended Audience

This document is intended for:

Network engineers

Technical support and servicing engineers

Network administrators

Technical Support

Ruijie Networks Website: https://www.ruijienetworks.com/

Technical Support Website: https://ruijienetworks.com/support

Case Portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical Support Email: service_rj@ruijienetworks.com

Live Chat: https://www.ruijienetworks.com/rita

Conventions

1. Signs

The symbols used in this document are described as follows:

Danger

An alert that calls attention to safety operation instructions that if not understood or

followed when operating the device can result in physical injury.

Warning

An alert that calls attention to important rules and information that if not understood or

followed can result in data loss or equipment damage.

Caution

An alert that calls attention to essential information that if not understood or followed

can result in function failure or performance degradation.

Note

An alert that contains additional or supplementary information that if not understood or

followed will not lead to serious consequences.

Specification

An alert that contains a description of product or version support.

2. Note

This manual provides the device installation steps, hardware troubleshooting, module

technical specifications, and specifications and usage guidelines for cables and

connectors. It is intended for the users who have some experience in installing and

maintaining network hardware. At the same time, it is assumed that the users are

already familiar with the related terms and concepts.

Contents

Preface.................................................................................................................................................. I

1 Product Overview ............................................................................................................................ 1

1.1 Appearance...............................................................................................................................1

1.2 Package Contents.....................................................................................................................3

1.3 Technical Specifications...........................................................................................................3

1.3.1 Size and Weight............................................................................................................3

1.3.2 RF ...................................................................................................................................4

1.3.3 Ports ..............................................................................................................................5

1.3.4 Power Supply................................................................................................................6

1.3.5 Environment and Reliability ........................................................................................6

1.4 LEDs and Button.......................................................................................................................7

2 Preparing for Installation................................................................................................................ 9

2.1 Safety Precautions....................................................................................................................9

2.1.1 General Safety Precautions .........................................................................................9

2.1.2 Handling Safety ............................................................................................................9

2.1.3 Electric Safety..............................................................................................................10

2.1.4 Storage Safety.............................................................................................................10

2.2 Installation Environment Requirements..............................................................................10

2.2.1 Bearing Requirements...............................................................................................11

2.2.2 Ventilation Requirements..........................................................................................11

2.2.3 Space Requirement....................................................................................................11

2.2.4 Temperature/Humidity Requirements.....................................................................11

2.2.5 Cleanliness Requirements.........................................................................................12

2.2.6 Anti-interference Requirements ...............................................................................13

2.2.7 Installation Site Requirements..................................................................................13

2.3 Tools ........................................................................................................................................13

3 Installing the Access Point............................................................................................................ 15

3.1 Installation Flowchart ............................................................................................................15

3.2 Before You Begin....................................................................................................................15

3.3 Precautions.............................................................................................................................17

3.4 Installing the Access Point.....................................................................................................17

3.4.1 Ceiling Mounting........................................................................................................17

3.4.2 Wall Mounting ............................................................................................................19

3.5 Securing the Access Point......................................................................................................21

3.6 Removing the Access Point ...................................................................................................22

3.7 Connecting Cables .................................................................................................................23

3.8 Bundling Cables......................................................................................................................23

3.8.1 Precautions.................................................................................................................23

3.8.2 Bundling Steps............................................................................................................23

3.9 Checking after Installation ....................................................................................................23

3.9.1 Checking the Access Point.........................................................................................23

iii

3.9.2 Checking Cable Connection.......................................................................................23

3.9.3 Checking Power Supply .............................................................................................24

4 Verifying Operating Status ........................................................................................................... 25

4.1 Configuring the Environment ...............................................................................................25

4.2 Powering up the AP................................................................................................................25

4.2.1 Checking Environment before Power-on.................................................................25

4.2.2 Checking Environment after Power-on....................................................................25

5 Monitoring and Maintenance....................................................................................................... 26

5.1 Monitoring ..............................................................................................................................26

5.1.1 LED...............................................................................................................................26

5.1.2 CLI Commands ...........................................................................................................26

5.2 Remote Maintenance.............................................................................................................26

5.3 Hardware Maintenance .........................................................................................................26

6 Troubleshooting ............................................................................................................................ 27

6.1 Troubleshooting Flowchart ...................................................................................................27

6.2 Troubleshooting.....................................................................................................................27

6.2.1 LED does not light up after the AP is powered on ..................................................27

6.2.2 Ethernet port is not working after the Ethernet cable is plugged in.....................28

6.2.3 Wireless client cannot find the AP ............................................................................28

6.2.4 LED keeps blinking red ..............................................................................................28

6.2.5 LED keeps blinking green..........................................................................................28

6.2.6 LED keeps blinking orange (Fit AP mode) ................................................................28

6.2.7 LED does not turn solid blue or blinking blue .........................................................28

7 Appendix ........................................................................................................................................ 28

7.1 Connectors and Media...........................................................................................................28

7.2 Cabling Recommendations ...................................................................................................30

7.3 Power Supply..........................................................................................................................34

Hardware Installation and Reference Guid Product Overview

1 Product Overview

The RG-AP810-I AP is a dual-band dual-radio access point compliant with the IEEE

802.11ax standard. The RG-AP810-I AP provides a combined data rate of 1.775 Gbps, with

up to 574 Mbps in the 2.4 GHz band and 1.201 Gbps in the 5 GHz band, available for

flexible deployments in the field of education, government, finance and business.

1.1 Appearance

The RG-AP810-I provides one 10/100/1000 BASE-T Ethernet port, one Console port and

one DC power plug. The AP supports PoE or DC power supply.

Figure 1-1 Appearance

Hardware Installation and Reference Guid Product Overview

Figure 1-2 Front Panel

Table 1-1 Front Panel

No.

Item

Description

LED

Indicate the operation status of device.

Figure 1-3 Side View

Tabla de contenidos

Otros manuales de Punto de acceso inalámbrico de Ruijie

Ruijie

Ruijie Reyee Series Manual de usuario

Ruijie

Ruijie RG-AP630 Directional Manual de instalación y funcionamiento

Ruijie

Ruijie RG-WLAN Series Manual de usuario

Ruijie

Ruijie Reyee RG-RAP6260 Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP680 CD Series Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee Series Manual de usuario

Ruijie

Ruijie RG-AP840-I (V2) Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee RG-RAP2200 Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP710 Series Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee RG-RAP Series Manual de usuario

Ruijie

Ruijie Reyee RG-RAP52-OD Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP180-I Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP680-CD Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP840-L Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee RG-RAP2260(G) Manual de instalación y funcionamiento

Ruijie

Ruijie RG-EAP602 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP530-I V2 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-RAP1200 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP110-L Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP630 IDA2 Series Manual de instalación y funcionamiento

Ruijie

Ruijie AP630 Series Guía de instalación

Ruijie

Ruijie RG-AP110-L Manual de usuario

Ruijie

Ruijie RG-MAP852V3 Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP840-I Series Manual de instalación y funcionamiento

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario