Ruijie Reyee RG-RAP1201 Manual de instalación y funcionamiento
Ruijie Reyee RG-RAP1201
Access Point
Hardware Installation and Reference Guide
Document Version: V1.0
Date: 2023-07-28
Copyright © 2023 Ruijie
Networks
Copyright
Copyright © 2023 Ruijie Networks
All rights are reserved in this document and this statement.
Any reproduction, excerption, backup, modification, transmission, translation or
commercial use of this document or any portion of this document, in any form or by any
means, without the prior written consent of Ruijie Networks is prohibited.
Trademarks including , , are
owned by Ruijie Networks.
All other trademarks or registered trademarks mentioned in this document are owned
by their respective owners.
Disclaimer
The products, services, or features you purchase are subject to commercial contracts and
terms. Some or all of the products, services or features described in this document may
not be within the scope of your purchase or use. Unless otherwise agreed in the contract,
Ruijie Networks does not make any express or implied statement or guarantee for the
content of this document.
Due to product version upgrades or other reasons, the content of this document will be
updated from time to time. Ruijie Networks reserves the right to modify the content of
the document without any notice or prompt.
This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy
and will not shoulder any responsibility for losses and damages caused due to content
omissions, inaccuracies or errors.
I
Preface
Audience
This document is intended for:
Network engineers
Technical support and servicing engineers
Network administrators
Technical Support
Official website of Ruijie Reyee: https://www.ruijienetworks.com/products/reyee
Technical support website: https://ruijienetworks.com/support
Case portal: https://caseportal.ruijienetworks.com
Community: https://community.ruijienetworks.com
Technical support email: service_rj@ruijienetworks.com
Conventions
1. GUI Symbols
Interface
symbol
Description
Example
Boldface
1. Button names
2. Window names, tab name, field
name and menu items
3. Link
1. Click OK.
2. Select Config Wizard.
3. Click the Download File link.
>
Multi-level menus items
Select System >Time.
2. Signs
The signs used in this document are described as follows:
Warning
An alert that calls attention to important rules and information that if not understood or
followed can result in data loss or equipment damage.
II
Caution
An alert that calls attention to essential information that if not understood or followed
can result in function failure or performance degradation.
Note
An alert that contains additional or supplementary information that if not understood or
followed will not lead to serious consequences.
Specification
An alert that contains a description of product or version support.
3. Note
This document provides the installation steps, troubleshooting, technical specifications,
as well as the specifications and use guidelines of cables and connectors. It is intended
for users who want to understand the above contents, and are familiar with the
installation and maintenance of networking hardware.
i
Contents
Preface.................................................................................................................................................. I
1Product Overview ............................................................................................................................ 1
1.1 Package Contents.....................................................................................................................1
1.2 Product Appearance ................................................................................................................2
1.2.1 Front Panel....................................................................................................................2
1.2.2 Rear Panel .....................................................................................................................3
1.3 Technical Specifications...........................................................................................................4
1.4 Power Module Technical Specifications .................................................................................6
1.5 Cooling ......................................................................................................................................6
2Preparing for Installation................................................................................................................ 7
2.1 Safety Precautions....................................................................................................................7
2.2 Installation Environment Requirements................................................................................7
2.2.1 Temperature/Humidity................................................................................................7
2.2.2 Cleanliness....................................................................................................................8
2.2.3 ESD Protection..............................................................................................................9
2.2.4 Anti-interference ..........................................................................................................9
2.2.5 Mounting Workbench................................................................................................10
2.3 Tools ........................................................................................................................................10
3Installing the AP............................................................................................................................. 11
3.1 Before You Begin....................................................................................................................11
ii
3.2 Safety Precautions..................................................................................................................11
3.3 Installing the AP .....................................................................................................................12
3.4 Bundling Cables......................................................................................................................13
3.5 Verifying Installation..............................................................................................................13
4Verifying the Operating Status..................................................................................................... 15
4.1 Setting up the Environment ..................................................................................................15
4.2 Powering on the AP................................................................................................................15
4.2.1 Checking Before Power-On .......................................................................................15
4.2.2 Checking After Power-on...........................................................................................15
4.3 Troubleshooting Power Failures...........................................................................................15
5Monitoring and Maintenance....................................................................................................... 16
5.1 Monitoring ..............................................................................................................................16
5.2 Hardware Maintenance .........................................................................................................16
6Troubleshooting ............................................................................................................................ 17
6.1 Troubleshooting Flowchart ...................................................................................................17
6.2 Common Faults ......................................................................................................................17
6.2.1 The LED Is Off After the Device is Powered On .......................................................17
6.2.2 Ethernet Port Is Not Working After the Ethernet Cable Is Plugged In ..................17
6.2.3 A STA Cannot Discover the AP...................................................................................18
7Appendix ........................................................................................................................................ 19
7.1 Connectors and Media...........................................................................................................19
Hardware Installation and Reference Guide Product Overview
1
1 Product Overview
1.1 Package Contents
Table 1-1 Package Contents
No.
Item
Quantity
1
RG-RAP1201 access point
1
2
Protective cover
1
3
Phillips pan head screws (M4 x 20 mm)
2
4
Quick installation guide
1
5
Warranty manual
1
Note
The package contents above are intended to provide a general overview, and are subject
to the terms of the order contract. Please check your goods carefully against the package
contents or order contract. If you have any questions, please contact the distributor.
Hardware Installation and Reference Guide Product Overview
2
1.2 Product Appearance
1.2.1 Front Panel
Figure 1-1 Front Panel
Table 1-2 LEDs
Mark
Item
Status
Description
2
LED
Off
The access point is NOT receiving power.
Fast blinking (blinks
eight times per
second)
The access point is starting up.
Steady white
The access point is functioning properly.
Slow blinking (blinks
twice per second)
The access point is not connected to the
Internet.
Blinks twice
consecutively
The access point is upgrading. Do not power it
off.
Hardware Installation and Reference Guide Product Overview
3
Table 1-3 Ports and Buttons on the Front Panel
Mark
Item
Description
1
LAN port
10/100/1000 Base-T Ethernet port for wired connection
3
Reset hole
Stick the pin to the Reset hole: Restart the access point.
Press and hold the pin to the Reset hole for more than 5
seconds: Restore the access point to factory settings.
1.2.2 Rear Panel
Figure 1-2 Rear Panel
Table 1-4 Ports on the Rear Panel
Mark
Port
Description
1
WAN/PoE
port
10/100/1000 Base-T Ethernet port for wired Ethernet
connection to transmit both data and power
Tabla de contenidos
Otros manuales de Punto de acceso inalámbrico de Ruijie
Ruijie
Ruijie RG-WLAN Series Manual de usuario
Ruijie
Ruijie RG-SAP750-SP Manual de instalación y funcionamiento
Ruijie
Ruijie RG-AP180(V3) Manual de instalación y funcionamiento
Ruijie
Ruijie RG-SAP825-SP Manual de instalación y funcionamiento
Ruijie
Ruijie RG-AP680-IO Manual de instalación y funcionamiento
Ruijie
Ruijie RG-AP630 IDA2 Series Manual de instalación y funcionamiento
Ruijie
Ruijie RG-AM5528-SF Manual de instalación y funcionamiento
Ruijie
Ruijie RG-AP740-I Series Manual de instalación y funcionamiento
Ruijie
Ruijie RG-AP810-I Manual de instalación y funcionamiento
Ruijie
Ruijie RG-AP130(L) Manual de instalación y funcionamiento
Ruijie
Ruijie Reyee RG-RAP73HD Manual de instalación y funcionamiento
Ruijie
Ruijie RG-AP720-L Series Manual de instalación y funcionamiento
Ruijie
Ruijie Reyee RG-RAP52-OD Manual de usuario
Ruijie
Ruijie Reyee RG-RAP2260 Manual de instalación y funcionamiento
Ruijie
Ruijie Reyee Series Manual de usuario
Ruijie
Ruijie Reyee RG-RAP1260 Manual de instalación y funcionamiento
Ruijie
Ruijie RG-AP110-L Manual de instalación y funcionamiento
Ruijie
Ruijie RG-AP630 Series Manual de instalación y funcionamiento
Ruijie
Ruijie RG-AP680-AR Manual de instalación y funcionamiento
Ruijie
Ruijie RG-AP680P-L Manual de instalación y funcionamiento
