Ruijie AP850-AR Manual de instalación y funcionamiento

Ruijie AP850-AR(V3) Access Point

Hardware Installation and Reference Guide

Document Version: V1.1

Date: April 21, 2023

All rights are reserved in this document and this statement.

Any reproduction, excerption, backup, modification, transmission, translation or commercial use of this document

or any portion of this document, in any form or by any means, without the prior written consent of Ruijie Networks

is prohibited.

Trademark and are owned by Ruijie Networks.

All other trademarks or registered trademarks mentioned in this document are owned by their respective owners.

Disclaimer

The products, services, or features you purchase are subject to commercial contracts and terms. Some or all of

the products, services or features described in this document may not be within the scope of your purchase or

use. Unless otherwise agreed in the contract, Ruijie Networks does not make any express or implied statement

or guarantee for the content of this document.

Due to product version upgrades or other reasons, the content of this document will be updated from time to

time. Ruijie Networks reserves the right to modify the content of the document without any notice or prompt.

This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy and will not shoulder

any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Hardware Installation and Reference Guide

Preface

Intended Audience

This document is intended for:

Network engineers

Technical support and servicing engineers

Network administrators

Technical Support

Ruijie Networks website: https://www.ruijienetworks.com/

Technical support website: https://ruijienetworks.com/support

Case portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical support email: se[email protected]

Skype: [email protected]

Conventions

1. Conversions

Convention

Description

Bold font

Commands, command options, and keywords are in bold font.

Italic font

Arguments for which you supply values are in italic font.

[ ]

Elements in square brackets are optional.

{ x | y | z }

Alternative keywords are grouped in braces and separated by

vertical bars.

[ x | y | z ]

Optional alternative keywords are grouped in brackets and

separated by vertical bars.

&<1-n>

The argument before the sign (&) can be input for consecutive 1- n

times.

Double slashes at the beginning of a line of code indicate a

comment line.

2. Signs

The signs used in this document are described as follows:

Warning

An alert that calls attention to important rules and information that if not understood or followed can result in

data loss or equipment damage.

Hardware Installation and Reference Guide

Caution

An alert that calls attention to essential information that if not understood or followed can result in function

failure or performance degradation.

Note

An alert that contains additional or supplementary information that if not understood or followed will not lead to

serious consequences.

Specification

An alert that contains a description of product or version support.

3. Note

The manual offers configuration information (including model, port type and command line interface) for

indicative purpose only. In case of any discrepancy or inconsistency between the manual and the actual version,

the actual version prevails.

Hardware Installation and Reference Guide

Contents

Preface...................................................................................................................................................I

1 Product Introduction...........................................................................................................................1

1.1 Overview....................................................................................................................................1

1.2 Product Appearance..................................................................................................................1

1.3 Package Contents......................................................................................................................4

1.4 Technical Specifications............................................................................................................4

1.4.1 Dimensions and Weight.................................................................................................4

1.4.2 Radio Specifications ......................................................................................................5

1.4.3 Power Supply and Consumption...................................................................................7

1.4.4 Environment and Reliability...........................................................................................7

1.5 LED and Button..........................................................................................................................8

1.6 Optical Module...........................................................................................................................9

2 Preparing for Installation..................................................................................................................11

2.1 Safety Precautions...................................................................................................................11

2.1.1 General Safety Precautions.........................................................................................11

2.1.2 Handling Safety............................................................................................................11

2.1.3 Electric Safety..............................................................................................................11

2.1.4 Storage Safety.............................................................................................................12

2.2 Installation Environment Requirements...................................................................................12

2.2.1 Bearing Requirements.................................................................................................12

2.2.2 Ventilation Requirements.............................................................................................12

2.2.3 Space Requirements ...................................................................................................12

Hardware Installation and Reference Guide

2.2.4 Temperature/Humidity Requirements..........................................................................12

2.2.5 Cleanliness Requirements...........................................................................................13

2.2.6 Anti-interference Requirements...................................................................................14

2.2.7 Lightning Protection Requirements .............................................................................14

2.2.8 Other Requirements.....................................................................................................14

2.3 Tools ........................................................................................................................................14

3 Installing the AP................................................................................................................................15

3.1 Installation Procedure..............................................................................................................15

3.2 Before You Begin.....................................................................................................................15

3.3 Precautions..............................................................................................................................16

3.4 Installing the AP.......................................................................................................................17

3.4.1 Mounting on the Ceiling...............................................................................................17

3.4.2 Mounting on the Wall...................................................................................................18

3.4.3 Removing the AP .........................................................................................................20

3.5 Installing Other Modules..........................................................................................................21

3.5.1 Securing the AP ...........................................................................................................21

3.5.2 Installing an Optical Module.........................................................................................22

3.6 Connecting Cables...................................................................................................................23

3.7 Bundling Cables.......................................................................................................................23

3.7.1 Precautions..................................................................................................................23

3.7.2 Bundling Steps.............................................................................................................23

3.8 Checking After Installation.......................................................................................................23

3.8.1 Checking the AP ..........................................................................................................23

3.8.2 Checking Cable Connections ......................................................................................24

iii

Hardware Installation and Reference Guide

3.8.3 Checking the Power Supply.........................................................................................24

4 Verifying the Operating Status.........................................................................................................25

4.1 Setting up the Configuration Environment...............................................................................25

4.2 Powering on the Device...........................................................................................................25

4.2.1 Checklist Before Power-on..........................................................................................25

4.2.2 ChecklistAfter Power-on .............................................................................................25

5 Monitoring and Maintenance............................................................................................................26

5.1 Monitoring................................................................................................................................26

5.1.1 LED..............................................................................................................................26

5.1.2 CLI Commands............................................................................................................26

5.2 Remote Maintenance...............................................................................................................26

5.3 Hardware Maintenance............................................................................................................26

6 Troubleshooting................................................................................................................................27

6.1 General Troubleshooting Flowchart ........................................................................................27

6.2 Common Troubleshooting Procedures....................................................................................27

6.2.1 Ethernet Port Is Not WorkingAfter the Ethernet Cable Is Plugged In.........................27

6.2.2 LED Is Off for a Long Time..........................................................................................27

6.2.3 LED Keeps Steady Red...............................................................................................27

6.2.4 LED Keeps Steady Green ...........................................................................................28

6.2.5 LED Keeps Blinking Blue at an Interval of 0.2s (in Fit Mode) .....................................28

6.2.6 LED Does Not Turn Steady Blue or Blinking Blue.......................................................28

6.2.7 Radio Signal of the AP Cannot Be Found ...................................................................28

7 Appendix...........................................................................................................................................29

7.1 Connectors and Media.............................................................................................................29

Hardware Installation and Reference Guide

Product Introduction

7.2 Optical Modules and Specifications.........................................................................................31

7.3 Cabling Recommendations......................................................................................................32

7.4 DC Power Connector Specifications .......................................................................................35

Hardware Installation and Reference Guide

Product Introduction

1 Product Introduction

1.1 Overview

RG-AP850-AR(V3) is an IEEE 802.11ax-compliant wireless access point (AP) released by Ruijie Networks for

indoor scenarios in the higher education, government, general education, finance, and business sectors. It

supports four radios, among which the 2.4 GHz band can provide a maximum data rate of 574 Mbps and the 5

GHz band can provide a maximum data rate of up to 4.8 Gbps. This AP can provide a maximum access rate of

5.378 Gbps, which breaks through the bottleneck in wireless performance.

In the design of RG-AP850-AR(V3), wireless network security, radio control, mobile access, Quality of Service

(QoS), and seamless roaming, IoT module expansion, and other important factors are fully considered. The RG-

AP850-AR(V3) can be used together with Ruijie's access controllers (ACs) to implement STA data forwarding,

security, and access control.

The RG-AP850-AR(V3) can work in IEEE 802.11ax, 802.11ac, and 802.11n modes simultaneously. It can be

mounted onto a wall, ceiling, and other locations. Moreover, the RG-AP850-AR(V3) supports local power supply

and power over Ethernet (PoE), which can be selected based on power supply conditions. It is especially

applicable to large campuses, enterprise offices, hotspots, and other high-density scenarios.

1.2 Product Appearance

The RG-AP850-AR(V3) provides three RF ports, two Ethernet copper ports, one 5G SFPport, one RJ45 console

port, one DC power connector, one USB port, and one reset button. For the two Ethernet copper ports, LAN 1

port supports IEEE 802.3af/at/bt-compliant PoE and LAN 2/IoT port can be used to supply power to the IoT

module (48 V/0.27 A, Max.: 12.95 W). The following figures show the product appearance.

Figure 1-1 Top View

Hardware Installation and Reference Guide

Product Introduction

Figure 1-2 Bottom View

Figure 1-3 Front View

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Punto de acceso inalámbrico de Ruijie

Ruijie

Ruijie RG-AP180(V3) Manual de instalación y funcionamiento

Ruijie

Ruijie RG-WLAN Series Manual de usuario

Ruijie

Ruijie RG-AP530-I V2 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-MAP852-SF-S Manual de instalación y funcionamiento

Ruijie

Ruijie RG-WLAN Series Manual de usuario

Ruijie

Ruijie Reyee RG-RAP1200-MNT Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP680-A Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP180 Series Manual de usuario

Ruijie

Ruijie Reyee RG-RAP73HD Manual de usuario

Ruijie

Ruijie RG-AP520 Series Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee RAP6260-D Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee Series Manual de usuario

Ruijie

Ruijie Reyee Series Manual de usuario

Ruijie

Ruijie Reyee RG-RAP Series Manual de usuario

Ruijie

Ruijie RG-SAP685-SP Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP880-L Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP680-CD Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP680-L Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AM5532 Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP880-E Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP680P-L Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP720-L Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP680-I Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP840-L Manual de instalación y funcionamiento

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario