Ruijie RG-MAP852-SF-S Manual de instalación y funcionamiento

Ruijie RG-MAP852-SF-S Access Point

Hardware Installation and Reference Guide

Document Version: V1.1

Date: August 16, 2023

Networks

All rights are reserved in this document and this statement.

Any reproduction, excerption, backup, modification, transmission, translation or

commercial use of this document or any portion of this document, in any form or by any

means, without the prior written consent of Ruijie Networks is prohibited.

Trademark and are owned by Ruijie

Networks.

All other trademarks or registered trademarks mentioned in this document are owned by

their respective owners.

Disclaimer

The products, services, or features you purchase are subject to commercial contracts and

terms. Some or all of the products, services or features described in this document may

not be within the scope of your purchase or use. Unless otherwise agreed in the contract,

Ruijie Networks does not make any express or implied statement or guarantee for the

content of this document.

Due to product version upgrades or other reasons, the content of this document will be

updated from time to time. Ruijie Networks reserves the right to modify the content of

the document without any notice or prompt.

This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy

and will not shoulder any responsibility for losses and damages caused due to content

omissions, inaccuracies or errors.

Preface

Intended Audience

This document is intended for:

Network engineers

Technical support and servicing engineers

Network administrators

Technical Support

Ruijie Networks Website: https://www.ruijienetworks.com/

Technical Support Website: https://ruijienetworks.com/support

Case Portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical Support Email: service_rj@ruijienetworks.com

Skype: service_rj@ruijienetworks.com

Conventions

1. Conversions

Convention

Description

Bold font

Commands, command options, and keywords are in

bold font.

Italic font

Arguments for which you supply values are in italic font.

[ ]

Elements in square brackets are optional.

{ x | y | z }

Alternative keywords are grouped in braces and

separated by vertical bars.

[ x | y | z ]

Optional alternative keywords are grouped in brackets

and separated by vertical bars.

&<1-n>

The argument before the sign (&) can be input for

consecutive 1- n times.

Double slashes at the beginning of a line of code

indicate a comment line.

2. Signs

The signs used in this document are described as follows:

Warning

An alert that calls attention to important rules and information that if not understood or

followed can result in data loss or equipment damage.

Caution

An alert that calls attention to essential information that if not understood or followed

can result in function failure or performance degradation.

Note

An alert that contains additional or supplementary information that if not understood or

followed will not lead to serious consequences.

Specification

An alert that contains a description of product or version support.

3. Note

The manual offers configuration information (including model, port type and command

line interface) for indicative purpose only. In case of any discrepancy or inconsistency

between the manual and the actual version, the actual version prevails.

Contents

Preface..................................................................................................................................................I

1 Product Introduction........................................................................................................................1

1.1 Product Overview.....................................................................................................................1

1.2 Product Appearance ................................................................................................................1

1.3 Package Contents.....................................................................................................................5

1.4 Technical Specifications...........................................................................................................6

1.4.1 Dimensions and Weight...............................................................................................6

1.4.2 RF Specifications...........................................................................................................7

1.4.3 Port Specifications........................................................................................................9

1.4.4 Power Supply and Consumption ................................................................................9

1.4.5 Environment and Reliability ......................................................................................10

1.5 Indicators and Buttons ..........................................................................................................10

2 Preparing for Installation...............................................................................................................12

2.1 Safety Precautions..................................................................................................................12

2.1.1 General Safety Precautions .......................................................................................12

2.1.2 Handling Safety ..........................................................................................................12

2.1.3 Electric Safety..............................................................................................................13

2.1.4 Storage Security .........................................................................................................13

2.2 Installation Environment Requirements..............................................................................13

2.2.1 Bearing Requirements...............................................................................................14

2.2.2 Ventilation Requirements..........................................................................................14

2.2.3 Space Requirements ..................................................................................................14

2.2.4 Temperature/Humidity Requirements.....................................................................14

2.2.5 Cleanliness Requirements.........................................................................................15

2.2.6 Grounding Requirements..........................................................................................16

2.2.7 Anti-interference Requirements ...............................................................................16

2.2.8 Lightning Protection Requirements .........................................................................16

2.2.9 Inspection of the Installation Unit............................................................................17

2.3 Tools ........................................................................................................................................17

3 Installation ......................................................................................................................................18

3.1 Installation Procedure ...........................................................................................................18

3.2 Checking Before Installation.................................................................................................19

3.3 Precautions.............................................................................................................................19

3.4 Installing the Device...............................................................................................................20

3.4.1 Embedding in an 86-type Box ...................................................................................20

3.4.2 Removing the AP........................................................................................................24

3.5 Connecting Cables .................................................................................................................25

3.6 Bundling Cables......................................................................................................................25

3.6.1 Precautions .................................................................................................................25

3.6.2 Bundling Steps............................................................................................................26

3.7 Installation Verification..........................................................................................................26

iii

3.7.1 Checking the AP..........................................................................................................26

3.7.2 Checking Cable Connection.......................................................................................26

3.7.3 Checking the Power Supply.......................................................................................26

4 Debugging.......................................................................................................................................27

4.1 Establishing the Configuration Environment ......................................................................27

4.2 Powering on the AP................................................................................................................27

4.2.1 Checklist Before Power-on ........................................................................................27

4.2.2 Checking the Environment After Power-on .............................................................27

5 Monitoring and Maintenance........................................................................................................28

5.1 Monitoring ..............................................................................................................................28

5.1.1 Indicators ....................................................................................................................28

5.1.2 CLI Commands ...........................................................................................................28

5.2 Remote Maintenance.............................................................................................................28

5.3 Hardware Maintenance .........................................................................................................28

6 Troubleshooting .............................................................................................................................28

6.1 General Troubleshooting Procedure....................................................................................28

6.2 Common Troubleshooting Procedures................................................................................29

6.2.1 Ethernet Port Is Not Working After the Ethernet Cable Is Plugged In..................29

6.2.2 LED Is Off for a Long Time.........................................................................................29

6.2.3 LED Is Steady Red.......................................................................................................29

6.2.4 LED Is Steady Green...................................................................................................30

6.2.5 No Wireless Signal Searched.....................................................................................30

7 Appendix .........................................................................................................................................31

7.1 Connectors and Media...........................................................................................................31

7.2 Cabling Recommendations ...................................................................................................32

7.3 Optical Modules and Specifications......................................................................................36

7.4 Power Adapter Specifications ...............................................................................................37

Hardware Installation and Reference Guide Product Introduction

1 Product Introduction

1.1 Product Overview

RG-MAP852-SF-S is a wireless access point (AP) for new-generation high-speed wireless

networks in scenarios with dense buildings, such as the campus dormitory network and

medical care ward network. It adopts the latest 802.11ax protocol and dual-radio

dual-band design. The 2.4 GHz radio frequency (RF) unit provides up to 574 Mbps access

rate, and the 5 GHz RF unit provides up to 1.201 Gbps access rate. The device provides up

to 1.775 Gbps wireless access rate. The ultra-fast wireless network makes performance

no longer a bottleneck.

1.2 Product Appearance

RG-MAP852-SF-S contains two wireless RF ports, one 10/100/1000Base-T adaptive

Ethernet port, one 1G optical port, one Console port, and one DC power supply port for

the external power adapter. Power can be supplied to RG-MAP852-SF-S through the DC

power adapter. The following figures show the product appearance.

Figure 1-1Front View

Hardware Installation and Reference Guide Product Introduction

Figure 1-2Rear View

Figure 1-3Installation View

Tabla de contenidos

Otros manuales de Punto de acceso inalámbrico de Ruijie

Ruijie

Ruijie RG-AP130(L) Manual de instalación y funcionamiento

Ruijie

Ruijie RG-WLAN Series Manual de usuario

Ruijie

Ruijie RG-AP710 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP110-L Manual de usuario

Ruijie

Ruijie Reyee Series Dimensiones

Ruijie

Ruijie RG-SAP845-SP Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP820-L(V2) Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP740-I Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP110-L Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AM5528-SF Manual de instalación y funcionamiento

Ruijie

Ruijie RG-WLAN Series Manual de usuario

Ruijie

Ruijie RG-AP210-L Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP680-L Manual de instalación y funcionamiento

Ruijie

Ruijie RG-SAP885-SP Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee RG-RAP6262 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP680-CD Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP130(W2) V2 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-SAP185-SP-W Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP630 Directional Manual de instalación y funcionamiento

Ruijie

Ruijie RG-RAP1200 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP680-AR Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee Series Manual de usuario

Ruijie

Ruijie RG-AP680-O Manual de usuario

Ruijie

Ruijie RG-AP180P-L Manual de instalación y funcionamiento

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario