Rosslare MIFARE AY-T6350 Instrucciones de montaje

AY-T6350

MIFARE® Contactless Smart Card / PIN

Readers

Installation and Programming Manual

This manual and the information contained herein are proprietary to ROSSLARE

ENTERPRISES LIMITED and/or its related companies and/or subsidiaries’

(hereafter: "ROSSLARE"). Only ROSSLARE and its customers have the right to

use the information.

No part of this manual may be re-produced or transmitted in any form or by any

means, electronic or mechanical, for any purpose, without the express written

permission of ROSSLARE.

ROSSLARE owns patents and patent applications, trademarks, copyrights, or

other intellectual property rights covering the subject matter in this manual.

TEXTS, IMAGES, AND ILLUSTRATIONS INCLUDING THEIR ARRANGEMENT IN

THIS DOCUMENT ARE SUBJECT TO THE PROTECTION OF COPYRIGHT LAWS

AND OTHER LEGAL RIGHTS WORLDWIDE. THEIR USE, REPRODUCTION, AND

TRANSMITTAL TO THIRD PARTIES WITHOUT EXPRESS WRITTEN PERMISSION

MAY RESULT IN LEGAL PROCEEDINGS.

The furnishing of this manual to any party does not give that party or any third

party any license to these patents, trademarks, copyrights or other intellectual

property rights, except as expressly provided in any written agreement of

ROSSLARE.

ROSSLARE reserves the right to revise and change this document at any time,

without being obliged to announce such revisions or changes beforehand or

after the fact.

Table of Contents

AY-T6350 Installation and Programming Manual iii

Table of Contents

1. Introduction ................................................................8

1.1 Supported RFID Transponders.................................................. 8

1.2 Box Content ........................................................................... 8

2. Technical Specifications..............................................9

3. Installation ................................................................10

3.1 Mounting ............................................................................. 10

3.2 Wiring .................................................................................. 11

4. How to Use the Reader .............................................13

4.1 Normal Operation ................................................................. 13

4.2 Optical Back Tamper ............................................................. 14

4.3 LED Control .......................................................................... 14

5. Keypad Programming Instructions ..........................15

5.1 Programming Menu .............................................................. 15

5.2 Entering Programming Mode................................................. 16

5.3 Exiting Programming Mode ................................................... 16

5.4 Selecting Keypad Transmission Format ................................... 17

5.4.1 Single Key, Wiegand 6-Bit (Rosslare Format) .................................18

5.4.2 Single Key, Wiegand 6-Bit, Nibble & Parities .................................18

5.4.3 Single Key, Wiegand 8-Bit, Nibbles Complemented ......................18

5.4.4 4 Keys Binary + Facility Code, Wiegand 26-Bit ..............................19

5.4.5 1 to 5 Keys + Facility Code, Wiegand 26-Bit .................................19

5.4.6 6 Keys BCD and Parity Bits, Wiegand 26-Bit..................................20

5.4.7 Single Key, 3x4 Matrix Keypad (MD-P64)......................................21

5.4.8 1 to 8 Keys BCD, Clock & Data .....................................................21

Table of Contents

iv AY-T6350 Installation and Programming Manual

5.5 Selecting the Proximity Card Transmission Format................... 22

5.5.1 Wiegand 26-Bit ............................................................................23

5.5.2 Clock and Data.............................................................................23

5.5.3 Wiegand Card + PIN Transmission Format ....................................23

5.5.4 Wiegand 26-Bit and Facility Code .................................................24

5.5.5 Wiegand 32-Bit ............................................................................24

5.5.6 Wiegand 32-Bit Reversed..............................................................24

5.5.7 Wiegand 34-Bit ............................................................................25

5.5.8 Wiegand 40-Bit and Checksum ....................................................25

5.6 Changing the Programming Code.......................................... 26

5.7 Changing the Facility Code.................................................... 26

5.8 Return to Factory Default Settings.......................................... 27

5.9 Replacing a lost Programming Code....................................... 27

A. Limited Warranty ......................................................28

List of Figures

AY-T6350 Installation and Programming Manual v

List of Figures

Figure 1: Removing the Top Cover ..................................................................10

List of Tables

vi AY-T6350 Installation and Programming Manual

List of Tables

Table 1: Wiring Colors .....................................................................................11

Table 2: Programming Menu...........................................................................15

Notice and Disclaimer

AY-T6350 Installation and Programming Manual vii

Notice and Disclaimer

This manual’s sole purpose is to assist installers and/or users in the safe and

efficient installation and usage of the system and/or product, and/or software

described herein.

BEFORE ATTEMPTING TO INSTALL AND/OR USE THE SYSTEM,THE INSTALLER AND THE

USER MUST READ THIS MANUAL AND BECOME FAMILIAR WITH ALL SAFETY

REQUIREMENTS AND OPERATING PROCEDURES.

The system must not be used for purposes other than those for which it

was designed.

The use of the software associated with the system and/or product, if

applicable, is subject to the terms of the license provided as part of the

purchase documents.

ROSSLARE exclusive warranty and liability is limited to the warranty and

liability statement provided in an appendix at the end of this document.

This manual describes the maximum configuration of the system with the

maximum number of functions, including future options. Therefore, not all

functions described in this manual may be available in the specific system

and/or product configuration you purchased.

Incorrect operation or installation, or failure of the user to effectively

maintain the system, relieves the manufacturer (and seller) from all or any

responsibility for consequent noncompliance, damage, or injury.

The text, images and graphics contained in the manual are for the purpose

of illustration and reference only.

All data contained herein subject to change without prior notice.

In no event shall manufacturer be liable for any special, direct, indirect,

incidental, consequential, exemplary or punitive damages (including,

without limitation, any and all damages from business interruption, loss of

profits or revenue, cost of capital or loss of use of any property or capital or

injury).

All graphics in this manual are for reference only, some deviation between

the image(s) and the actual product may occur.

All wiring diagrams are intended for reference only, the photograph or

graphic of the PCB(s) are intended for clearer illustration and

understanding of the product and may differ from the actual PCB(s).

Introduction

8 AY-T6350 Installation and Programming Manual

1. Introduction

The AY-T6350 is MIFARE® contactless smart card and PIN reader for

indoor and outdoor use. The unit reads the MIFARE card serial

number (CSN) and transmits in Wiegand, Clock & Data, or Wiegand

Card + PIN formats.

In addition, the AY-T6350 comes with a backlit keypad that can be

programmed to output eight data formats. The AY-T6350 supports

MIFARE Classic and MIFARE Ultralight cards that allow multiple card

and keypad transmission formats, thus providing a high level of

compatibility and connectivity with host controllers.

1.1 Supported RFID Transponders

The AY-T6350 reads the following transponders:

MIFARE Ultralight 512-bit EEPROM

MIFARE Classic 1K bytes memory

MIFARE Classic 4K bytes memory

MIFARE Ultralight 512-bit EEPROM is only partly supported; only

32 bits out of the 64 bits can be transmitted.

1.2 Box Content

Before beginning, verify that all of the following is in the box; if

anything is missing, please contact your nearest Rosslare office.

One AY-T6350 reader

Installation kit including:

One drilling template (label/sticker)

One security spline key

One security hex screw

Two mounting screws and wall plugs

Installation and Programming Manual

Technical Specifications

AY-T6350 Installation and Programming Manual 9

2. Technical Specifications

Electrical Characteristics

Power Supply Type Linear (recommended)

Input Voltage 8–16 VDC

Absolute Maximum Voltage

(non-operating)

18 VDC

Maximum Input Current Standby: 180 mA, Read: 235 mA

LED Control Input Dry Contact N.O.

Tamper Output Open collector, active low, max. sink

current 32 mA

Max. Controller Cable Distance 150 m (500 ft)

Max. Proximity Read Range* 70 mm (2.8 in.)

Frequency 13.56 MHz

Transmission Formats Wiegand and Clock & Data

Card Compatibility MIFARE Classic and MIFARE Ultralight

cards

Environmental Characteristics

Operating Temp. Range -31°C to 63°C (-25°F to 145°F)

Operating Humidity 0 to 95% (non-condensing)

Suitable for outdoor use (meets IP65)

Physical Characteristics

Height x Width x Depth 110 x 80 x 17.5 mm (4.3 x 3.2 x 0.7 in.)

Weight 170 g (6 oz)

* Measured using a Rosslare proximity card or equivalent. Range also depends

on electrical environment and proximity to metal.

Installation

10 AY-T6350 Installation and Programming Manual

3. Installation

Installation of an RFID reader adjacent to metallic surfaces

might alter the reader’s specifications. To diminish this

interference, use a plastic spacer when mounting the reader.

The AY-T6350 pack includes everything needed to install and operate

the smart card sector readers. Mount the reader on the required

surface and connect it to the access control system.

3.1 Mounting

1. Peel off the back of the self-adhesive mounting label template

and place it at the required mounting location.

2. Using the template as a guide, drill two holes (sizes indicated on

the template) used for mounting the back plate onto the surface.

3. Insert a suitable wall plug into each screw hole.

4. Drill a 10-mm (7/16”) hole for the cable. If mounting on metal,

place a grommet or electrical tape around the edge of the hole.

5. At the bottom of the unit’s case, remove the screw.

6. Remove the reader's snap-off front cover to reveal the two screw

holes (Figure 1).

Figure 1: Removing the Top Cover

Tabla de contenidos

Otros manuales de Lector de tarjetas de Rosslare

Rosslare

Rosslare AY-D09M Instrucciones de montaje

Rosslare

Rosslare DR-6280 Manual de usuario

Rosslare

Rosslare AY-Z12A Manual de usuario

Rosslare

Rosslare AY-K20C Manual de usuario

Rosslare

Rosslare Mifare CP-R25 Instrucciones de montaje

Rosslare

Rosslare DR-6255 Manual de usuario

Rosslare

Rosslare AY-H12C Manual de usuario

Rosslare

Rosslare CSN SELECT AYC-6355 Series Manual de usuario

Rosslare

Rosslare AYC-E60B Instrucciones de montaje

Rosslare

Rosslare DR-U955BT Manual de usuario

Rosslare

Rosslare DR-12C Manual de usuario

Rosslare

Rosslare AY 20 Series Manual de usuario

Rosslare

Rosslare AY-U910 Manual de usuario

Rosslare

Rosslare AY 6255 Series Manual de usuario

Rosslare

Rosslare AY-Q6250 Instrucciones de montaje

Rosslare

Rosslare AYC-F60 Series Instrucciones de montaje

Rosslare

Rosslare AY-R12 Manual de usuario

Rosslare

Rosslare AY-H6255BT Manual de usuario

Rosslare

Rosslare Multi-Smart AY-K35 Manual de operación

Rosslare

Rosslare DR-U955BT Manual de usuario

Rosslare

Rosslare Anti-Vandal MIFARE AY-Q6 60 Series Manual de usuario

Rosslare

Rosslare CSN SMART AY-H6355BT Manual de usuario

Rosslare

Rosslare AY-Z12 Manual de usuario

Rosslare

Rosslare AY-K6255 Manual de usuario

Manuales populares de Lector de tarjetas de otras marcas

Lindy

Lindy 43185 Manual de usuario

Lindy

Lindy 43185 Manual de usuario

ViziT

ViziT RD-4F Manual de usuario

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Manual de usuario

AVID ID

AVID ID AVID1043 Manual de usuario

Conrad

Conrad PCMCIA Manual de usuario

Lindy

Lindy 51541 Manual de usuario

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Manual de usuario

Johnson Controls

Johnson Controls Kantech tyco ioSmart Manual de usuario

ACS

ACS ACR122L Manual de usuario

Secukey

Secukey S2-MF Manual de usuario

Elecom

Elecom MR-SMC07 series Manual de usuario

Alien

Alien ALR-9800 Manual de usuario

ACS

ACS ACR310 Manual de usuario

Datamars

Datamars R-IN1300 MID Manual de usuario

Alarm Lock

Alarm Lock AL-PRE2 Manual de usuario

xpr

xpr B100PROX-AH Guía del usuario

SimpleTech

SimpleTech FlashLink Manual de usuario