Rosslare AY-R12 Manual de usuario

AY-R12

Outdoor RGB Illuminated Reader

Installation Manual

This manual and the information contained herein are proprietary to ROSSLARE

ENTERPRISES LIMITED and/or its related companies and/or subsidiaries’

(hereafter: "ROSSLARE"). Only ROSSLARE and its customers have the right to

use the information.

No part of this manual may be re-produced or transmitted in any form or by any

means, electronic or mechanical, for any purpose, without the express written

permission of ROSSLARE.

ROSSLARE owns patents and patent applications, trademarks, copyrights, or

other intellectual property rights covering the subject matter in this manual.

TEXTS, IMAGES, AND ILLUSTRATIONS INCLUDING THEIR ARRANGEMENT IN

THIS DOCUMENT ARE SUBJECT TO THE PROTECTION OF COPYRIGHT LAWS

AND OTHER LEGAL RIGHTS WORLDWIDE. THEIR USE, REPRODUCTION, AND

TRANSMITTAL TO THIRD PARTIES WITHOUT EXPRESS WRITTEN PERMISSION

MAY RESULT IN LEGAL PROCEEDINGS.

The furnishing of this manual to any party does not give that party or any third

party any license to these patents, trademarks, copyrights or other intellectual

property rights, except as expressly provided in any written agreement of

ROSSLARE.

ROSSLARE reserves the right to revise and change this document at any time,

without being obliged to announce such revisions or changes beforehand or

after the fact.

Table of Contents

AY-R12 Installation Manual iii

Table of Contents

1. Introduction ................................................................7

1.1 Features.................................................................................. 7

2. Technical Specifications..............................................8

3. Mounting Instructions ................................................9

4. Wiring Instructions ...................................................10

5. Operating Instructions..............................................12

6. Testing the Reader ....................................................13

A. Limited Warranty ......................................................14

List of Figures

iv AY-R12 Installation Manual

List of Figures

Figure 1: Mounting Template ............................................................................9

List of Tables

AY-R12 Installation Manual v

List of Tables

Table 1: Wiring Colors.....................................................................................10

Table 2: Operations Table................................................................................12

Notice and Disclaimer

vi AY-R12 Installation Manual

Notice and Disclaimer

This manual’s sole purpose is to assist installers and/or users in the safe and

efficient installation and usage of the system and/or product described herein.

BEFORE ATTEMPTING TO INSTALL AND/OR USE THE SYSTEM,THE INSTALLER AND THE

USER MUST READ THIS MANUAL AND BECOME FAMILIAR WITH ALL SAFETY

REQUIREMENTS AND OPERATING PROCEDURES.

The system must not be used for purposes other than those for which it

was designed.

The use of the software associated with the system and/or product, if

applicable, is subject to the terms of the license provided as part of the

purchase documents.

ROSSLARE exclusive warranty and liability is limited to the warranty and

liability statement provided in an appendix at the end of this document.

This manual describes the maximum configuration of the system with the

maximum number of functions, including future options. Therefore, not all

functions described in this manual may be available in the specific system

and/or product configuration you purchased.

Incorrect operation or installation, or failure of the user to effectively

maintain the system, relieves the manufacturer (and seller) from all or any

responsibility for consequent noncompliance, damage, or injury.

The text, images and graphics contained in the manual are for the purpose

of illustration and reference only.

All data contained herein is subject to change without prior notice.

In no event shall manufacturer be liable for any special, direct, indirect,

incidental, consequential, exemplary or punitive damages (including,

without limitation, any and all damages from business interruption, loss of

profits or revenue, cost of capital or loss of use of any property or capital or

injury).

All graphics in this manual are for reference only, some deviation between

the image(s) and the actual product may occur.

All wiring diagrams are intended for reference only, the photograph or

graphic of the PCB(s) are intended for clearer illustration and

understanding of the product and may differ from the actual PCB(s).

Introduction

AY-R12 Installation Manual 7

1. Introduction

The AY-R12 Proximity Reader is an RFID proximity card reader and is

installed when using access control systems.

This is a unique product that has a variety of options to control the

reader's illumination according to various settings.

An example of this are the settings that enable users to set the reader

to project green light when everything is normal and red in case of

emergency; this is done by adjusting the inputs accordingly.

This product is compatible with any controller that supports the

Wiegand 26-Bit protocol (AC-215/225/425/525 panels; AC-015, AC-

020, and AC-115 controllers; and AxTraxNG software), as well with

any third-party controllers that support the same Wiegand input.

The panel links are used to set various conditions between events and

outputs to get the required illumination from the reader.

1.1 Features

Stylish and practical application to add color to any environment

enabling a high quality high-tech atmosphere

Seven different colors to create a unique ambience

Sixteen pre-programmed color schemes that are enabled using

wired inputs

Optical back and cover tamper sends a signal to the control panel

when removed from wall or housing opening

Built-in 125 kHz Reader for RFID cards with a read range of up to

8 cm (3.15 in.)

Complies with RoHS, WEEE, CE standards for international

distribution

Technical Specifications

8 AY-R12 Installation Manual

2. Technical Specifications

Electrical Characteristics

Power Supply Type Linear type (recommended)

Operating Voltage Range 12–16 VDC

Maximum Input Current Standby: 100 mA

Read: 150 mA

Tamper Output Open collector, active low, max. sink

current 16 mA

Read Range* (max) 8 cm (3.2 in.)

Maximum Cable Distance to

Controller

150 m (500 ft)

RE Modulation ASK @ 125 kHz

Regulatory Approvals CE

Environmental Characteristics

Operating Temp. Range -31°C to 63°C (-25°F to 145°F)

Operating Humidity Range 0 to 95% (non-condensing)

Physical Characteristics

Height x Width x Depth 120 x 89 x 21 mm

(4.7 x 3.5 x 0.8 in.)

Weight 202 g (7.1 oz)

* Measured using a Rosslare proximity card or equivalent. Range also depends

on electrical environment and proximity to metal.

Mounting Instructions

AY-R12 Installation Manual 9

3. Mounting Instructions

Installation of an RFID reader adjacent to metallic surfaces

might alter the reader’s specifications. To diminish this

interference, use a plastic spacer when mounting the reader.

When mounting the reader, you must remove the snap-off cover to

access the screw holes.

To mount the reader:

1. Determine an appropriate mounting position for the reader.

2. Screw off the back of the unit and place it at the desired

mounting position.

3. Using the template as a guide, drill two holes (hole size is

indicated on mounting template) for mounting the reader to the

surface (Figure 1).

Figure 1: Mounting Template

4. Drill a 10-mm (7/16”) hole for the cable.

5. Route the interface cable from the reader to the controller.

The proximity reader is also mountable using strong epoxy glue.

After application, firmly hold the reader in place until the glue

dries

Wiring Instructions

10 AY-R12 Installation Manual

4. Wiring Instructions

The AY-R12 is supplied with a 10-wire 45-cm (18”) pigtail, comprising

a 6-conductor cable.

To connect the reader to the controller:

1. Prepare the reader cable by cutting its jacket back 4.5 cm (1¼”)

and strip the wires 1.3 cm (½”).

2. Prepare the controller cable by cutting its jacket back 3.2 cm

(1¼”) and stripping the wires 1.3 cm (½”).

3. Splice the reader’s pigtail wires to the corresponding controller

wires and cover each connection.

Table 1: Wiring Colors

Color Wiring

Black Ground

Red Vin

Green Data 0

White Data 1

Brown G.LED

Purple Tamper

Yellow SET 0

Blue SET 1

Gray SET 2

Orange SET 3

If the tamper output is being utilized, connect the purple wire to

the correct input on the controller.

Tabla de contenidos

Otros manuales de Lector de tarjetas de Rosslare

Rosslare

Rosslare DigiTool GA-01 Manual de usuario

Rosslare

Rosslare MIFARE AY-T6350 Instrucciones de montaje

Rosslare

Rosslare MIFARE Classic AY 5B Series Manual de usuario

Rosslare

Rosslare Mifare CP-R25 Instrucciones de montaje

Rosslare

Rosslare AC-Q74 Instrucciones de montaje

Rosslare

Rosslare DR-U955BT Manual de usuario

Rosslare

Rosslare AY-V64B Instrucciones de montaje

Rosslare

Rosslare AY 20 Series Manual de usuario

Rosslare

Rosslare MIFARE Classic AY-K6255 Manual de usuario

Rosslare

Rosslare AY-U910 Manual de usuario

Rosslare

Rosslare AY 6255 Series Manual de usuario

Rosslare

Rosslare DR-12C Manual de usuario

Rosslare

Rosslare AY-Q6250 Instrucciones de montaje

Rosslare

Rosslare AY-K20C Manual de usuario

Rosslare

Rosslare AY-Q12 Instrucciones originales

Rosslare

Rosslare AY-D09M Instrucciones de montaje

Rosslare

Rosslare DR-12C Manual de usuario

Rosslare

Rosslare AY-K6255 Manual de usuario

Rosslare

Rosslare Anti-Vandal MIFARE AY-Q6 60 Series Manual de usuario

Rosslare

Rosslare AYC-F60 Series Instrucciones de montaje

Rosslare

Rosslare AY-U9**BT series Manual de operación

Rosslare

Rosslare AYC-E60B Instrucciones de montaje

Rosslare

Rosslare AY-K6255 Manual de usuario

Rosslare

Rosslare AY-x20 Series Manual de usuario

Manuales populares de Lector de tarjetas de otras marcas

Lindy

Lindy 43185 Manual de usuario

Lindy

Lindy 43185 Manual de usuario

ViziT

ViziT RD-4F Manual de usuario

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Manual de usuario

AVID ID

AVID ID AVID1043 Manual de usuario

Conrad

Conrad PCMCIA Manual de usuario

Lindy

Lindy 51541 Manual de usuario

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Manual de usuario

Johnson Controls

Johnson Controls Kantech tyco ioSmart Manual de usuario

ACS

ACS ACR122L Manual de usuario

Secukey

Secukey S2-MF Manual de usuario

Elecom

Elecom MR-SMC07 series Manual de usuario

Alien

Alien ALR-9800 Manual de usuario

ACS

ACS ACR310 Manual de usuario

Datamars

Datamars R-IN1300 MID Manual de usuario

Alarm Lock

Alarm Lock AL-PRE2 Manual de usuario

xpr

xpr B100PROX-AH Guía del usuario

SimpleTech

SimpleTech FlashLink Manual de usuario