ACS ACR310 Manual de usuario

Advanced Card Systems Ltd. Website: www.acs.com.hk

Email: info

acs.com.hk

Name Signature Date

Prepared by:

Danny Chow Feb 7, 2011

Approved by:

Eric Lee Feb 7, 2011

Operation Manual

ACR310/312 Operation Manual

Version 1.00 Feb 7, 2011 Pa

e 2 of 7

ACR310/312

Table of Contents

1.0. Introduction..................................................................................................................3

2.0. Powering Up.................................................................................................................3

3.0. Main Functions.............................................................................................................4

3.1. Smartcard reader..............................................................................................................4

3.2. Wi-Fi .................................................................................................................................4

3.3. Bluetooth...........................................................................................................................4

3.4. USB Host..........................................................................................................................5

3.5. USB Client........................................................................................................................5

3.6. Ethernet............................................................................................................................5

3.7. 3G / GPRS (ACR312 only)...............................................................................................5

3.8. RS485...............................................................................................................................6

3.9. GPS..................................................................................................................................6

3.10. Audio.................................................................................................................................6

3.11. SAM card slots .................................................................................................................6

3.12. MicroSD card slots ...........................................................................................................6

3.13. Rechargeable Battery.......................................................................................................6

4.0. FCC/IC Caution.............................................................................................................7

ACR310/312 Operation Manual

Version 1.00 Feb 7, 2011 Pa

e 3 of 7

ACR310/312

1.0. Introduction

Advanced Card Systems Limited developed this ACR310/312 Mobile

Validator for a dedicated customer Cubic Transport Systems Inc. This

document describes the basic operation of ACR310/312 Mobile Validator. This

Mobile Validator is a smart payment terminal which can read/write different

type of smartcards. Different connectivities are provided, e.g. Wi-Fi, Bluetooth,

Ethernet, GPRS/WCDMA, USB, RS485, etc., for connecting with server or

other devices. The typical applications are fixed payment systems in train

stations, bus stops, buses, etc.

ACR312 is the model with 3G function while ACR310 isn’t. The

Operation System (OS) of the product is Windows Mobile 6.5. The basic

operations of Windows Mobile will not be described in this document.

Marketing models number of customer:

Engineering Model Marketing model of customer

ACR310 5300-10009-4

ACR312 5300-10009-3

2.0. Powering Up

To power up the device, insert a power cable with 12V/24V DC source to the device at the DC

power socket indicated at the location below:

Battery

door

ACR310/312 Operation Manual

Version 1.00 Feb 7, 2011 Pa

e 4 of 7

ACR310/312

A optional rechargeable battery can be inserted at the back. It acts as a backup battery when

the external power is suddenly removed. So, the application software can perform some clearing

tasks before going to sleep mode.

3.0. Main Functions

3.1. Smartcard reader

The Mobile Validator is with a 13.56MHz smartcard reader built-in.

The demo application software running at startup read cards continuously.

When we present a card in front of the antenna, the demo application

software will show a corresponding message.

To exit the demo application, insert a mouse to the device and

click any white area at the side.

3.2. Wi-Fi

Wi-Fi has been enabled by default. To enable or disable Wi-Fi function, use a mouse to select:

ÎSettings ÎConnections ÎWireless Manager, then click the Wi-Fi bar.

To connect to a network, go to Wireless Manager, then click MenuÎWi-Fi Settings. Then you

can see the networks in scope. Click the network that you want to connect and fill in the necessary

information (e.g. password).

3.3. Bluetooth

To enable or disable Bluetooth function, use a mouse to select: ÎSettings Î

Connections ÎWireless Manager, then click the Bluetooth bar.

To configure the Bluetooth settings (e.g. set discoverable), go to Wireless Manager, then click

MenuÎBluetooth Settings.

Smartcard

antenna

ACR310/312 Operation Manual

Version 1.00 Feb 7, 2011 Pa

e 5 of 7

ACR310/312

3.4. USB Host

The USB host port is compliant with USB 1.1 full speed. USB devices (e.g. mouse, keyboard,

USB hub, etc) can be connected to the mobile validator via this port. For standard HID device (e.g.

mouse) or mass storage device (e.g. USB drive), no driver is needed.

3.5. USB Client

The USB client port is compliant with USB 2.0 high speed. The mobile validator can connect

to a host (e.g. PC) via this port. This port is intended for application development and debugging but

not for actual application.

PC will recognize the mobile validator as a windows mobile device. It can access the mobile

validator via ActiveSync.

3.6. Ethernet

An Ethernet port is provided for connecting to network via RJ45 cable. By default, it uses

dynamic IP address. So, when you connect the mobile validator to a network with DHCP server, it

should be able to get the IP address automatically.

Cable can be plugged to the mobile validator before or after booting up.

3.7. 3G / GPRS (ACR312 only)

Before using the 3G/GPRS feature, a SIM card should be installed in the SIM slot before

powering up the device.

3G/GPRS is enabled by default. To enable or disable the 3G/GPRS feature, use a mouse to

select: ÎSettings ÎConnections ÎWireless Manager, then click the Phone bar.

Before using the 3G/GPRS service, the proper APN (Access point name) should be

configured. Go to ÎSettings ÎConnections. Select “Add a new modem connection. In the field

of “Enter a name for the connection”, enter an arbitrary name. In the field of “Select a modem”, select

“Cellular Line (GPRS)”. In the next page, enter the proper APN provided from the GSM service

provider. In the next page, leave all the “User name”, “Password” and “Domain” fields as blank.

ACR310/312 Operation Manual

Version 1.00 Feb 7, 2011 Pa

e 6 of 7

ACR310/312

3.8. RS485

A general purpose RS485 interface is provided via a RJ11 connector. It can be accessed by

opening COM0 in the application software. The pin assignment is indicated as below:

Pin Functions

1 Reserved (Don’t connect)

2 Reserved (Don’t connect)

3 Reserved (Don’t connect)

4 RS485 D+

5 RS485 D-

6 GND

3.9. GPS

The mobile validator has a build-in GPS receiver with integrated antenna. The GPS is

enabled when the COM5 is opened by an application. In the MicroSD card, the tools “GPSInfo” and

“putty” can be used to open the COM5 and hence enabling the GPS.

3.10. Audio

The mobile validator has a speaker to generate music/sound/tone.

3.11. SAM card slots

The mobile validator has 4 SAM slots under the rechargeable battery. The card should be

inserted before powering up the device.

3.12. MicroSD card slots

The mobile validator has 1 MicroSD card slot under rechargeable battery. The card should be

inserted before powering up the device. With the MicroSD card inserted, the card content will be

mapped to the path “Storage Card”.

If there is an executable file “autorun.exe” exists in the MicroSD card, the mobile validator will

automatically launch it after power up.

3.13. Rechargeable Battery

A rechargeable battery is provided. It acts as a power backup when the external power is

accidentally removed. So, the application can still keep running if the external power is removed for a

short period of time.

RJ11 Connector at Mobile Validator

6 5 4 3 2 1

USB Client Port

ACR310/312 Operation Manual

Version 1.00 Feb 7, 2011 Pa

e 7 of 7

ACR310/312

4.0. FCC/IC Caution

FCC Caution:

Any Changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference.

(2) this device must accept any interference received, including interference that may cause

undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This transmitter must be installed to

provide a separation distance of at least 20 cm from all persons. This equipment generates

uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

—Consult the dealer or an experienced radio/TV technician for help.

IC Warning ：

Operation is subject to the following two conditions:

(1)this device may not cause interference.

(2)this device must accept any interference; including interference that may cause undesired

operation of the device.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Lector de tarjetas de ACS

Manuales populares de Lector de tarjetas de otras marcas

Lindy

Lindy 43185 Manual de usuario

Lindy

Lindy 43185 Manual de usuario

ViziT

ViziT RD-4F Manual de usuario

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Manual de usuario

AVID ID

AVID ID AVID1043 Manual de usuario

Conrad

Conrad PCMCIA Manual de usuario

Rosslare

Rosslare DR-6255 Manual de usuario

Lindy

Lindy 51541 Manual de usuario

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Manual de usuario

Johnson Controls

Johnson Controls Kantech tyco ioSmart Manual de usuario

Secukey

Secukey S2-MF Manual de usuario

Elecom

Elecom MR-SMC07 series Manual de usuario

Alien

Alien ALR-9800 Manual de usuario

Datamars

Datamars R-IN1300 MID Manual de usuario

Alarm Lock

Alarm Lock AL-PRE2 Manual de usuario

xpr

xpr B100PROX-AH Guía del usuario

SimpleTech

SimpleTech FlashLink Manual de usuario

Rolls

Rolls HR74 Manual de usuario