Rosslare AYC-E60B Instrucciones de montaje

AYC-E/Q60 Series

Backlit

PROX & PIN Reader –

Convertible Series with Genuine

HID Technology™

Installation and Programming Manual

AYC-E60B

AYC-E60N

AYC-Q60

This manual and the information contained herein are proprietary to ROSSLARE

ENTERPRISES LIMITED and/or its related companies and/or subsidiaries’

(hereafter: "ROSSLARE"). Only ROSSLARE and its customers have the right to

use the information.

No part of this manual may be re-produced or transmitted in any form or by any

means, electronic or mechanical, for any purpose, without the express written

permission of ROSSLARE.

ROSSLARE owns patents and patent applications, trademarks, copyrights, or

other intellectual property rights covering the subject matter in this manual.

TEXTS, IMAGES, AND ILLUSTRATIONS INCLUDING THEIR ARRANGEMENT IN

THIS DOCUMENT ARE SUBJECT TO THE PROTECTION OF COPYRIGHT LAWS

AND OTHER LEGAL RIGHTS WORLDWIDE. THEIR USE, REPRODUCTION, AND

TRANSMITTAL TO THIRD PARTIES WITHOUT EXPRESS WRITTEN PERMISSION

MAY RESULT IN LEGAL PROCEEDINGS.

The furnishing of this manual to any party does not give that party or any third

party any license to these patents, trademarks, copyrights or other intellectual

property rights, except as expressly provided in any written agreement of

ROSSLARE.

ROSSLARE reserves the right to revise and change this document at any time,

without being obliged to announce such revisions or changes beforehand or

after the fact.

Table of Contents

AYC-E/Q60 Series Installation and Programming Manual iii

Table of Contents

1. Introduction ................................................................9

1.1 Box Content ........................................................................... 9

1.2 Ancillary Equipment .............................................................. 10

2. Technical Specifications............................................11

3. Installation ................................................................13

3.1 Mounting the AYC-E60......................................................... 13

3.2 Mounting the AYC-Q60 ........................................................ 14

3.3 Wiring .................................................................................. 16

3.3.1 Wiring the Unit as a Reader ..........................................................16

3.3.2 Wiring the Unit as a Controller .....................................................17

4. Reader Operation......................................................20

4.1 Standby Mode ...................................................................... 20

4.2 Programming as a Reader...................................................... 20

4.2.1 Entering Programming Mode........................................................22

4.2.2 Exiting Programming Mode ..........................................................22

4.2.3 Selecting Keypad Transmission Format .........................................23

4.2.4 Selecting HID Prox Card Transmission Format ...............................28

4.2.5 Selecting Rosslare Proximity Card Transmission Format.................29

4.2.6 Changing the Programming Code ................................................31

4.2.7 Changing the Facility Code ...........................................................31

4.2.8 Setting the Backlight Behavior ......................................................32

4.2.9 Setting the Credential Format.......................................................32

4.2.10 Return to Factory Default Settings ................................................33

4.2.11 Replacing a Lost Programming Code ............................................33

Table of Contents

iv AYC-E/Q60 Series Installation and Programming Manual

5. Controller Operation.................................................34

5.1 Normal, Secure, and Master Users.......................................... 34

5.2 Modes of Operation.............................................................. 35

5.2.1 Normal Mode ...............................................................................35

5.2.2 Bypass Mode ................................................................................35

5.2.3 Secure Mode ................................................................................36

5.2.4 Changing the Modes of Operation ...............................................36

5.3 Auxiliary Input and Output..................................................... 37

5.4 Door Alarms ......................................................................... 38

5.5 Internal Case and Back Tamper.............................................. 38

5.6 Lockout Feature (Keypad/Card Tamper).................................. 38

5.7 REX Function ........................................................................ 38

5.8 Secured Intelligent Power Supply ........................................... 39

5.9 Programming as a Controller ................................................. 40

5.9.1 Entering Programming Mode........................................................41

5.9.2 Exiting Programming Mode ..........................................................41

5.9.3 Changing Lock Strike Code ..........................................................42

5.9.4 Changing Auxiliary Code ..............................................................42

5.9.5 Changing the Programming Code ................................................43

5.9.6 Changing the Normal/Secure Code ..............................................44

5.9.7 Changing the Normal/Bypass Code and Door Chime Settings ......44

5.9.8 Setting Fail Safe/Secure Operation, Tamper Siren and Lock Strike

Release Time.................................................................................45

5.9.9 Defining the Auxiliary Input and Output .......................................46

5.9.10 Setting the Lockout Feature ..........................................................52

5.9.11 Setting the Backlight Behavior ......................................................53

5.9.12 Selecting the Credential Format....................................................53

5.9.13 Enrolling Primary and Secondary Codes ........................................54

Table of Contents

AYC-E/Q60 Series Installation and Programming Manual v

5.9.14 Deleting Primary and Secondary Codes.........................................57

5.9.15 Relay Codes Assignment...............................................................60

5.9.16 PIN Code Length/Factory Default Settings.....................................62

5.9.17 Replacing a Lost Programming Code ............................................63

5.9.18 Replacing a Lost Normal/Secure Code...........................................63

A. Declaration of Conformity........................................64

B. Limited Warranty ......................................................65

List of Figures

vi AYC-E/Q60 Series Installation and Programming Manual

List of Figures

Figure 1: Drilling and Mounting Template for AYC-E60...................................13

Figure 2: Drilling and Mounting Template for AYC-Q60..................................15

Figure 3: Controller Application Wiring Diagram .............................................18

Figure 4: Controller Wiring – Using the Internal Power ....................................19

Figure 5: Controller Wiring – Using the External Power ...................................19

List of Tables

AYC-E/Q60 Series Installation and Programming Manual vii

List of Tables

Table 1: Wiring the Reader to the Controller ...................................................16

Table 2: Wiring the Unit as a Controller...........................................................17

Table 3: Reader Programming Menu ...............................................................21

Table 4: Controller Programming Menu ..........................................................40

Table 5: Quick Reference Guide for Auxiliary Mode Setting.............................47

Notice and Disclaimer

viii AYC-E/Q60 Series Installation and Programming Manual

Notice and Disclaimer

This manual’s sole purpose is to assist installers and/or users in the safe and

efficient installation and usage of the system and/or product, and/or software

described herein.

BEFORE ATTEMPTING TO INSTALL AND/OR USE THE SYSTEM,THE INSTALLER AND THE

USER MUST READ THIS MANUAL AND BECOME FAMILIAR WITH ALL SAFETY

REQUIREMENTS AND OPERATING PROCEDURES.

The system must not be used for purposes other than those for which it

was designed.

The use of the software associated with the system and/or product, if

applicable, is subject to the terms of the license provided as part of the

purchase documents.

ROSSLARE exclusive warranty and liability is limited to the warranty and

liability statement provided in an appendix at the end of this document.

This manual describes the maximum configuration of the system with the

maximum number of functions, including future options. Therefore, not all

functions described in this manual may be available in the specific system

and/or product configuration you purchased.

Incorrect operation or installation, or failure of the user to effectively

maintain the system, relieves the manufacturer (and seller) from all or any

responsibility for consequent noncompliance, damage, or injury.

The text, images and graphics contained in the manual are for the purpose

of illustration and reference only.

All data contained herein subject to change without prior notice.

In no event shall manufacturer be liable for any special, direct, indirect,

incidental, consequential, exemplary or punitive damages (including,

without limitation, any and all damages from business interruption, loss of

profits or revenue, cost of capital or loss of use of any property or capital or

injury).

All graphics in this manual are for reference only, some deviation between

the image(s) and the actual product may occur.

All wiring diagrams are intended for reference only, the photograph or

graphic of the PCB(s) are intended for clearer illustration and

understanding of the product and may differ from the actual PCB(s).

Introduction

AYC-E/Q60 Series Installation and Programming Manual 9

1. Introduction

The AYC-E/Q60 is a series of Rosslare

PROX and PIN readers with

Genuine HID Technology™, as well as Rosslare's Convertible

technology. These units automatically determine whether to function

as a reader or as a secured standalone controller. If the unit is

connected to a standard access control unit, then it functions as a

reader. If the unit is connected to a Rosslare secured intelligent power

supply such as the PS-A25T, PS-C25T, or PS-C25TU, it functions as a

500 user secured standalone controller.

As a reader, the units can read all HID Prox cards/tags (125 kHz FSK)

using Genuine HID Technology and outputs HID Prox card data in

Wiegand according to the number of bits of data stored on the card.

The units also read Rosslare proximity cards (125 kHz) and can output

Rosslare proximity card data as Wiegand 26-Bit, Clock & Data, and

Wiegand + PIN.

As a controller, the units accept up to 500 users, and allow entry via a

personal identification number (PIN) and/or by presenting a proximity

card. The PIN code length for the controller has several options. The

PIN code length can be a set number of 4, 5, or 6 digits or it can be

flexible from 4 to 8 digits.

1.1 Box Content

Before beginning, verify that all of the following is in the box. If

anything is missing, please report the discrepancy to your nearest

Rosslare office.

One AYC-E/Q60 unit

Installation kit

Installation and operating instructions

Introduction

10 AYC-E/Q60 Series Installation and Programming Manual

1.2 Ancillary Equipment

The following equipment is required to complete your installation:

When functioning as a reader:

Compatible host controller (not supplied) – UL listed access

control unit (such as model AC-215U)

When functioning as a controller:

A secured intelligent power supply – such as the PC-25T, PS-

A25T, PS-C25T, or PS-C25TU secure controllers.

Only PS-C25TU can be used for UL-294 compliant installations.

This unit connects to the following:

Electric lock strike mechanism or a magnetic lock device,

which implements fail safe (power to lock) or fail secure

(power to open) functions

Request-to-Exit (REX) button – normally open type. Switch is

closed when pressed

Door monitor switch

Rosslare accessories can be found on www.rosslaresecurity.com.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Lector de tarjetas de Rosslare

Rosslare

Rosslare AY-U920BT-US Manual de usuario

Rosslare

Rosslare DR-12C Manual de usuario

Rosslare

Rosslare AYC-F60 Series Instrucciones de montaje

Rosslare

Rosslare AY-B8620 Manual de usuario

Rosslare

Rosslare AY-Z12 Manual de usuario

Rosslare

Rosslare MIFARE Classic AY 5B Series Manual de usuario

Rosslare

Rosslare AY-U910 Manual de usuario

Rosslare

Rosslare MIFARE Classic AY-K6255 Manual de usuario

Rosslare

Rosslare DR-6255 Manual de usuario

Rosslare

Rosslare AC-Q74 Instrucciones de montaje

Rosslare

Rosslare AY-x25B Series Manual de usuario

Rosslare

Rosslare MIFARE Classic AY-25B Series Manual de usuario

Rosslare

Rosslare DR-U955BT Manual de usuario

Rosslare

Rosslare AY-Z12A Manual de usuario

Rosslare

Rosslare AY-H6255BT Manual de usuario

Rosslare

Rosslare AY-K6255 Manual de usuario

Rosslare

Rosslare AY 6255 Series Manual de usuario

Rosslare

Rosslare AY-V64B Instrucciones de montaje

Rosslare

Rosslare AY-U9**BT series Manual de operación

Rosslare

Rosslare Anti-Vandal MIFARE AY-Q6 60 Series Manual de usuario

Rosslare

Rosslare CSN SELECT AYC-6355 Series Manual de usuario

Rosslare

Rosslare AY-K20C Manual de usuario

Rosslare

Rosslare DR-U955BT Manual de usuario

Rosslare

Rosslare AY-x20 Series Manual de usuario

Manuales populares de Lector de tarjetas de otras marcas

Lindy

Lindy 43185 Manual de usuario

Lindy

Lindy 43185 Manual de usuario

ViziT

ViziT RD-4F Manual de usuario

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Manual de usuario

AVID ID

AVID ID AVID1043 Manual de usuario

Conrad

Conrad PCMCIA Manual de usuario

Lindy

Lindy 51541 Manual de usuario

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Manual de usuario

Johnson Controls

Johnson Controls Kantech tyco ioSmart Manual de usuario

ACS

ACS ACR122L Manual de usuario

Secukey

Secukey S2-MF Manual de usuario

Elecom

Elecom MR-SMC07 series Manual de usuario

Alien

Alien ALR-9800 Manual de usuario

ACS

ACS ACR310 Manual de usuario

Datamars

Datamars R-IN1300 MID Manual de usuario

Alarm Lock

Alarm Lock AL-PRE2 Manual de usuario

xpr

xpr B100PROX-AH Guía del usuario

SimpleTech

SimpleTech FlashLink Manual de usuario