Rose electronics CRV-DLDFMPDVI Manual de usuario
CrystalView Pro fiber Rack
WWW.ROSE.COM
Digital fiber KVM extender rack
Rack containing 10 CrystalView Pro fiber
transmitters or receivers
Extends keyboard, video, and mouse signals
up to 33,000 feet away
Supports DVI and VGA video at resolutions
up to 1600 x 1200 (Optional1900 x 1200)
Single, Dual, Serial and Audio models
Easily adapted to your system
Features and Benefits
JExtend 10 KVM stations from 10 CPUs via fiber
cable:
(Multimode) 62.5-micron cable up to 650 feet
(Multimode) 50-micron cable up to 1,300 feet
(Singlemode) 9-micron cable up to 33,000 feet
JSupports:
DVI and VGA video modes
PS/2, SUN, USB keyboards and mice
JFull stereo audio (optional)
JSerial (optional RS232)
JVideo resolutions up to 1600 x 1200
(1900 x 1200 optional)
JFlexible modular architecture
JCompatible with Rose Electronics KVM switches
such as ServeView Pro, UltraView Pro, and
UltraMatrix
JCompatible with Windows, Windows NT, OS/2,
UNIX, Linux, and other operating systems
JUses a microprocessor to emulate the keyboard
and mouse. The keyboard and mouse on the
receiver unit do not have to be connected for the
PC to boot; only the transmitter must be connected
to the PC.
JFully automatic KVM sharing
(Local access models)
JOnly two fibers needed
JDigital OSD setup menu
JRack mount kits available for 4U chassis
in 19”, 23”, or24”
CrystalView™ Pro fiber Rack Advantage
The CrystalView Pro fiber rack is the KVM extender of
choice for businesses that need to extend and operate
several computers, servers, or KVM switches from a
great distance. The CrystalView Pro fiber rack makes
this possible by the use of standard fiber optic cable.
You can fully operate and control 10 computers or
servers from as far away as 33,000 feet using 9-micron
fiber cable.
The CrystalView Pro fiber rack supports both DVI video
as well as analog VGA video. All combinations of DVI
and VGA video cards and monitors are supported. The
OSD features make it easy to adjust all the necessary
device parameters, color, brightness, contrast, and
saturation. Using fiber cable, you can extend the
distance between the transmitter and receiver further
than with conventional CAT5 cable. In addition, fiber
cable is unaffected by electromagnetic interference,
keeping your data safe from interference from lightning
and over voltage transients.
The modular architecture makes the CrystalView Pro
fiber easily adapted to your system. PS/2, SUN, and
USB peripherals are supported. CAT5, Multimode and
Singlemode fiber cabling, serial for Touchscreens and
other supported serial devices, stereo audio, parallel for
printers, and 10BaseT Ethernet are also supported as
options.
Up to 10 transmitters or receivers can be
installed. Each module is totally
independent giving you the flexibility needed
to interface to PCs, serial devices, Sun
systems, Touchscreens, and more from a
central location.
On-screen display
Phone: 281-933-7673 E-mail: [email protected]
10707 Stancliff Rd. Houston, TX 77099
Rose Electronics – Europe: +49 (0)2454 969442 Rose Electronics – Asia: +65 6324 2322
DS-CRVPFR-2.2Copyright 2004 Rose Electronics. All rights reserved WWW.ROSE.COM
Typical Application
Access computers up to 6 miles away over fiber optic cable
CrystalView Pro fiber basics The CrystalView Pro fiber consists
of a transmitter that connects to a PC, server, or KVM switch and a
receiver that connects to a keyboard, monitor, and mouse, or a KVM
switch. The transmitter and receiver units are connected together with
up to 33,000 feet of standard 9-micron optical fiber cable.
The ideal way to apply the CrystalView Pro fiber is to connect the
transmitter to a Rose Electronics KVM switch. Expanding the switch
allows the receiver to access up to 1,000 computers or servers. The
Rose KVM switch can be connected between the transmitter and
computers, the KVM station and the receiver unit, or both.
Installation Installing the CrystalView Pro fiber unit is as easy as
connecting the KVM station to the receiver, connecting the CPU to the
transmitter, and connecting the transmitter to the receiver with fiber
cable.
Models The CrystalView Pro fiber is available in different models
with PC, SUN, and USB support. The PC model is available in a dual
version allowing for a second KVM station next to the PC’s, providing
operation from the transmitter or the receiver unit.
Keyboard and mouse emulation The CrystalView Pro fiber
uses a microprocessor to emulate the keyboard and mouse. This
means that the keyboard and mouse on the receiver do not have to be
connected for the PC to boot. Only the Transmitter must be connected
to the PC.
Rack Assembly The CrystalView Pro fiber Rack is designed to
easily mount in a standard 19” rack.
Part Numbers
Single rack cards
CRV-DLDFMPDVI-xRK Local-PC-Dual-Multimode
CRV-SRDFMPDVI-xRK Remote-PC-Multimode
CRV-DLDFSPDVI-xRK Local-PC-Dual-Singlemode
CRV-SRDFSPDVI-xRK Remote-PC-Singlemode
CRV-SLDFMUDVI-xRK Local-USB-Multimode
CRV-SRDFMUDVI-xRK Remote-USB-Multimode
CRV-SLDFSUDVI-xRK Local-USB-Singlemode
CRV-SRDFSUDVI-xRK Remote-USB-Singlemode
x = I - Internal PSU / E - External PSU
Rack units populated with 10 cards
CRV-CH10/DVI 10 slot empty chassis
CRV-DLDFMPDVI-RK10L Local-PC-Dual-Multimode
CRV-SRDFMPDVI-RK10R Remote-PC-Dual-Multimode
CRV-DLDFSPDVI-RK10L Local-PC-Dual-Singlemode
CRV-SRDFSPDVI-RK10R Remote-PC-Singlemode
CRV-SLDFMUDVI-RK10L Local-USB-Multimode
CRV-SRDFMUDVI-RK10R Remote-USB-Multimode
CRV-SLDFSUDVI-RK10L Local-USB-Singlemode
CRV-SRDFSUDVI-RK10R Remote-USB-Singlemode
ACC-DVIMVFVGA to DVI converter
RM-UM16nn Rackmount kit nn=19,23,24
/AUD part number suffix = Audio and serial option
Specifications
Dimensions 16.7 W x 7.0 D x 7.0 H
Weight Chassis – 15.5 lbs
Fully populated chassis approx. 30 lbs
(Depending on model)
Operating Temp 10°C – 45°C / 50°F – 113°F
Humidity 80% max, non-condensing
Resolution Up to 1900 x 1200
Connectors Video – DVI
PC -Keyboard/Mouse – MiniDin6
USB – Keyboard/Mouse – Type A/B
Power – 4-Pin square
Program – RJ22
Serial – DB9M
Audio – 3.5mm stereo jack (2)
Wavelength (Multimode) – 850nm
(Singlemode) – 1300nm
Power (Multimode) – 70-400µw
(Singlemode) – 180-2000µw
Approvals: CE
Rearview - 10 module rack
TRANSMITTERS
RECEIVERS
UP TO 33,000’
Este manual sirve para los siguientes modelos
6
Tabla de contenidos
Otros manuales de Extensor de Rose electronics
Rose electronics
Rose electronics CrystalView fiber CRK-1DFM/SUN Manual del propietario
Rose electronics
Rose electronics ORION Manual de usuario
Rose electronics
Rose electronics CrystalView Rack CRV-12SLP Manual del propietario
Rose electronics
Rose electronics CrystalView EX HDMI Multi CRV-SRDTXT2D-2T-HD6... Manual de usuario
Rose electronics
Rose electronics CRK-1P1V Manual de usuario
Rose electronics
Rose electronics CrystalView USB2 Manual de usuario
Rose electronics
Rose electronics CRK-1P1V Manual de usuario
Rose electronics
Rose electronics CRYSTALVIEW USB 1.1 Manual de usuario
Rose electronics
Rose electronics CrystalView CRK-1DTXT-HD5 Manual de usuario
Rose electronics
Rose electronics CrystalLink USB2.0 CATx Manual de usuario
Rose electronics
Rose electronics CrystalView DVI CATx CRK-2DTXPD1D Manual de usuario
Rose electronics
Rose electronics CrystalView Manual de usuario
Rose electronics
Rose electronics CrystalView DVI CAT Series Manual de usuario
Rose electronics
Rose electronics CrystalView EX5 Manual de usuario
Rose electronics
Rose electronics CrystalLink USB2.0 CATx Manual de usuario
Rose electronics
Rose electronics Xcion DVI/VGA over CATx Manual de usuario
Rose electronics
Rose electronics CrystalView fiber CRK-1DFM/SUN Manual de usuario
Rose electronics
Rose electronics CrystalLink CLK-1U1TP-40M Manual de usuario
Rose electronics
Rose electronics XtendVue Manual de usuario
Rose electronics
Rose electronics CrystalView Plus Manual de usuario
