Quantum PX502 Manual de referencia

Document 81-81453-02 A01, January 2006 1

Quantum PX502

Chassis Repacking Instructions

Introduction 3

Removing the Library from the Rack 3

Installing the Internal Shipping Restraints 6

Packing the Library for Shipment 12

Quantum PX502 Chassis Repacking Instructions

Document 81-81453-02 A01

January 2006

Made in the USA.

Quantum Corporation provides this publication “as is” without warranty of any kind, either express or implied, including but not

limited to the implied warranties of merchantability or fitness for a particular purpose. Quantum Corporation may revise this publication

from time to time without notice.

Your right to copy this document is limited by copyright law. Making copies or adaptations without prior written authorization of

Quantum Corporation is prohibited by law and constitutes a punishable violation of the law.

TRADEMARK STATEMENT

Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library are trademarks of Sun Microsystems, Inc.

Other trademarks may be mentioned herein which belong to other companies.

Quantum PX502 Chassis Repacking Instructions

Document 81-81453-02 A01

January 2006

Introduction 3

Introduction 0

This document explains how to repack the Quantum PX502 library. Follow

these instructions carefully to ensure the library is shipped properly.

Note: All PX500 Series documentation is located on the PX500 Series

Documentation CD included in the library accessory kit.

Caution: This procedure requires the packing materials originally sent

with the library for proper shipment. If you do not have the

library packing materials, contact Quantum customer support

for replacement packaging (800) 284-5101.

This procedure consists of the following steps:

•Removing the Library from the Rack

•Installing the Internal Shipping Restraints

•Packing the Library for Shipment

Removing the Library from the Rack 0

To remove the PX502 library from the rack:

Note: You must remove all tape cartridges from the library prior to

parking the library robotics for shipment.

1Using the OCP, open the front doors, remove both tape cartridge

magazines, and remove any tape cartridges from the fixed bins or

FlexLink™ (refer to the Quantum PX500 Series User’s Guide PN 81-81290

for information on OCP operation and bin locations).

After removing the tape cartridge magazines and closing the doors, the

library inventories all possible tape cartridge locations (magazines, fixed

slots, Flexlink, and tape drives). This process takes several minutes.

2From the Library Operations screen on the OCP, select Park for Shipping.

The library shuts down automatically.

Note: If there are tape cartridges in the library, the system will NOT

park the library robotics. You must remove all tape cartridges

from the system prior to parking the library robotics.

Quantum PX502 Chassis Repacking Instructions

Document 81-81453-02 A01

January 2006

4 Removing the Library from the Rack

3From the back of the library, disconnect all power, Ethernet, and SCSI

cables from the library and note their locations for later reinstallation.

Warning: This unit has more than one power supply cord.

Disconnect all power supply cords before servicing to

avoid electric shock.

4To remove the library chassis from the rack (see figure 1):

Note: Refer to the PX502 Quick Start Guide (PN 81-81292) for

additional PX502 rack mount information.

aLoosen the captive screws securing the tape drives to the chassis and

remove the tape drive(s) from the back of the library.

bLoosen the captive screw securing the power supplies to the chassis

and remove the power supplies from the back of the library.

cRemove PHILLIPS® screws securing each side of the chassis to the

rack mounting rails and remove two Allen screws securing both

clamps on the back of the library.

dRemove the library from the rack.

Warning: At least two people are required to move the library

chassis.

Quantum PX502 Chassis Repacking Instructions

Document 81-81453-02 A01

January 2006

Removing the Library from the Rack 5

Figure 1 Removing the

PX502 Library

Power supplies

Tape drives

Right magazine

Quantum PX502 Chassis Repacking Instructions

Document 81-81453-02 A01

January 2006

6 Installing the Internal Shipping Restraints

Installing the Internal Shipping Restraints 0

To ensure that the internal robotics within the library is not damaged, you

must install the internal shipping restraints on the robotics.

Caution: Failure to install the shipping restraints on the robotics may

void your warranty.

To install the internal shipping restraints:

1Place the library on a flat surface and remove the twelve PHILLIPS screws

securing the FlexLink™ cover and top cover plate to the library chassis

(see figure 2):

Note: If the bottom FlexLink cover has been removed, replace it

before shipping the library back to Quantum.

Figure 2 Removing the

Top Cover

Top cover

FlexLink cover

Quantum PX502 Chassis Repacking Instructions

Document 81-81453-02 A01

January 2006

Installing the Internal Shipping Restraints 7

2If the library is not operational and the Park for Shipping command was

not executed, grasp the robotics and gently move it to the front of the

library (see figure 3).

Caution: Take standard ESD precautions when working within the

library chassis.

Note: If there are any cartridges in the fixed bins, you can remove

them now.

Figure 3 Moving the

Robotics

Library robotics

Front

Back

3Install the metal restraints through the chassis eyelets as shown in

figure 4.

Quantum PX502 Chassis Repacking Instructions

Document 81-81453-02 A01

January 2006

8 Installing the Internal Shipping Restraints

Figure 4 Installing the

Metal Restraints

Metal restraints

Eyelet

4Install the two halves of the robotics shipping foams as shown in figure 5:

aInstall the left-hand foam first so that it fits down into the robotics

platform, then push towards the back of the unit until it stops.

bInstall the right-hand foam onto the library robotics so the motor fits

into the foam opening, then push towards the front of the library until

it stops.

Quantum PX502 Chassis Repacking Instructions

Document 81-81453-02 A01

January 2006

Installing the Internal Shipping Restraints 9

Figure 5 Installing the

Robotics Restraints

Robotics assembly shown

outside of library for clarity.

Right-handshipping

foam

Robotics motor

Left-hand shipping

foam

Foam inside

robotics platform

5Slide the robotics with the shipping foams under the metal restraints so

the metal bands fall into the restraint cutouts. Clamp the two halves of

the metal restraints together and secure with a tie band to secure the

robotics to the library chassis (see figure 6).

Quantum PX502 Chassis Repacking Instructions

Document 81-81453-02 A01

January 2006

10 Installing the Internal Shipping Restraints

Figure 6 Securing the

Robotics

Tie band

6Install the top covers previously removed in step 1.

7Install the tape drives, and power supplies previously removed in

Removing the Library from the Rack.

8To install the tape magazines, insert the metal pick included with the

accessory kit into the release holes and trip the magazine door release for

both the right and left magazine doors (see figure 7).

The magazine access doors open.

Otros manuales para PX502

Tabla de contenidos

Otros manuales de Almacenamiento de Quantum

Quantum

Quantum SuperLoader 3A Series Manual de usuario

Quantum

Quantum LTO-4 (Model B) Manual de usuario

Quantum

Quantum DLTtape DLT 2000 Manual de usuario

Quantum

Quantum ValueLoader DLT VS80 Manual del propietario

Quantum

Quantum ATL M1500 Manual de usuario

Quantum

Quantum StorNext QD7000 Manual de instalación y operación

Quantum

Quantum ValueLoader DLT VS160 Manual del propietario

Quantum

Quantum Maxtor Fireball CR Manual de usuario

Quantum

Quantum DAT 72 Manual de usuario

Quantum

Quantum PX500 Series Manual de usuario

Quantum

Quantum StorNext QD7000 Manual de usuario

Quantum

Quantum DLTtape DLT1 Manual de usuario

Quantum

Quantum StorNext M660 Instrucciones de instalación

Quantum

Quantum ATL M-Series Manual de usuario

Quantum

Quantum DXi6900 Guía de inicio rápido

Quantum

Quantum StorNext QD7000 Manual de usuario

Quantum

Quantum StorNext QM1200 Manual de usuario

Quantum

Quantum DXi6500 series Manual técnico

Quantum

Quantum Scalar i40 Manual de usuario

Quantum

Quantum DX100 Manual de usuario

Quantum

Quantum A-Series FTP Manual de instrucciones

Quantum

Quantum Scalar i40 Manual de usuario

Quantum

Quantum Scalar 100 Manual de usuario

Quantum

Quantum DLT Series Instrucciones de instalación

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario